[Amini77]

I have the same problem you had with the horizontal inner lights not turning on and the fog lights behind them are..So how did you do the wiring to fix it? I'm using the wiring from the pre-lci btw. Thanks!

[steve@codemybimmer]

Originally Posted by Amini77

I have the same problem you had with the horizontal inner lights not turning on and the fog lights behind them are..So how did you do the wiring to fix it? I'm using the wiring from the pre-lci btw. Thanks!

Looks like you just plugged the harness into the tail lights with the pre-lci wiring.

You have to get a needle and release the pins from the clip as shown here; the pre-lci and lci wiring are there. To get the wires out of the clip, you need to get a needle and push it into the each square hole and while pressing onto it, pull the wire out. Do this once for all four openings. Once you get the wires out, follow the instructions on the thread below and rearrange the wires, the wires will snap back into the clip; after that, plug them back into the tail lights.

http://www.m3post.com/forums/showthread.php?t=327782

[Amini77]

Originally Posted by Aritaurus

Looks like you just plugged the harness into the tail lights with the pre-lci wiring.

You have to get a needle and release the pins from the clip as shown here; the pre-lci and lci wiring are there. To get the wires out of the clip, you need to get a needle and push it into the each square hole and while pressing onto it, pull the wire out. Do this once for all four openings. Once you get the wires out, follow the instructions on the thread below and rearrange the wires, the wires will snap back into the clip; after that, plug them back into the tail lights.

http://www.m3post.com/forums/showthread.php?t=327782

Thanks for the help! I'll try it tomorrow and get back to you!

[Amini77]

Originally Posted by Aritaurus

Looks like you just plugged the harness into the tail lights with the pre-lci wiring.

You have to get a needle and release the pins from the clip as shown here; the pre-lci and lci wiring are there. To get the wires out of the clip, you need to get a needle and push it into the each square hole and while pressing onto it, pull the wire out. Do this once for all four openings. Once you get the wires out, follow the instructions on the thread below and rearrange the wires, the wires will snap back into the clip; after that, plug them back into the tail lights.

http://www.m3post.com/forums/showthread.php?t=327782

Alright I saw your wiring configuration on your post and I used the same order on my right side and it works now! thank you! As for the left, I used the same order but backwards and that seemed to work too

[steve@codemybimmer]

Originally Posted by Amini77

Alright I saw your wiring configuration on your post and I used the same order on my right side and it works now! thank you! As for the left, I used the same order but backwards and that seemed to work too

[BMWSG]

Found someone that willing to swop his Lci trunk lid and tail lamps with me. What must I swop in order to make it works on my pre-LCI ?

I assumed only

1. Lci trunk lid
2. Tail lamps
3. ??

Please advice.

[keeedle]

Originally Posted by BMWSG

Found someone that willing to swop his Lci trunk lid and tail lamps with me. What must I swop in order to make it works on my pre-LCI ?

I assumed only

1. Lci trunk lid
2. Tail lamps
3. ??

Please advice.

The trunk and the tail lights are all the parts that you need.
But you will always need coding in order to get rid of fast blinking and error code on dash

[altaf6885]

Originally Posted by Aritaurus

Update! here is the finished product. The shop was able to colour match it 100% and I could not find any difference between the painted trunk and the quarter panels even in direct sunlight.

I badged it back as a 325i since right now, I do have the only E90 325i in Toronto with this tail light conversion. I also, got the car coded just now thanks to Dimsum and it is completely error free!



Uploaded with ImageShack.us

I need to re code my touring after lci upgrade. How did you do it? Can it be done in the UK? Who's dimsum?

Help

[RNE90]

mtech rear do itttt!

[steve@codemybimmer]

Originally Posted by altaf6885

I need to re code my touring after lci upgrade. How did you do it? Can it be done in the UK? Who's dimsum?

Help

I traded this car in last year and I have the F30 now. I'm not entirely who does does coding the UK but perhaps you can check on the classified section of this site.