[PresaMat]

I uploaded the new map at 11pm last night. I dunno but it definately felt a little better. More peppy lol. Keep up the great work!

[Straz M3]

I gotta do this later...and Shiv correct me if I am wrong but you only need to pop the top of the black box to get to the Procede...you dont have to take off that larger piece in the engine right?

[HyperM3]

For those of us at the Dyno Day in NJ last Friday, did we get this version or do we have to update it?

[bmwzimmer]

Remove the black cover, unscrew just the screw on the far left right below the ECU only. Then you can lift the whole air filter assembly and use something to hold it up a couple inches to give you room. Then you can slide off the ECU cover and open it half way to get access to the connector.

[OpenFlash]

Originally Posted by HyperM3

For those of us at the Dyno Day in NJ last Friday, did we get this version or do we have to update it?

You already have it!

Shiv

[M3to335]

I have the same question as the other guy did. Mine comes tomorrow and shipped around the 25th. Is it 1.45?

[OpenFlash]

Yes indeed.

[musc]

When is your new Stage 1 map going to be ready?

[M3to335]

Shiv, one last question.... when you ship them , does it have "sign in person" on the UPS deliveries? If so, I need to get my a$$ home early

[CASHBY]

quick question,

Is this new 1.45v file good for people with exhaust or should we use another map?

IIRC you said its same maps for exhaust and stock exhaust.

[PresaMat]

CEA until stg 1 map comes out use 1.45. You will like it.

Mat

[CASHBY]

wtf,

I loaded the new map and 10 second after the map loaded my car threw a CEL and said engine malfunction reduce engine power. this happend when i started the car up and it was idling for about 10-20 seconds.

any ideas?

[lawdude]

Originally Posted by CEA 3

wtf,

I loaded the new map and 10 second after the map loaded my car threw a CEL and said engine malfunction reduce engine power. this happend when i started the car up and it was idling for about 10-20 seconds.

any ideas?

What was the error code?

[CASHBY]

not sure dont have a code reader anymore.

I just took out the PROcede though and the CEL went away.

any ideas
?

[trickydick]

Originally Posted by CEA 3

wtf,

I loaded the new map and 10 second after the map loaded my car threw a CEL and said engine malfunction reduce engine power. this happend when i started the car up and it was idling for about 10-20 seconds.

any ideas?

Did you use the new Procede Reader v1.01 to load the new map?

[OpenFlash]

+1. You will need to use the new user map loading software to load the new map. If you use the old softare, you'll throw all sorts of codes because the signal inputs/signal outputs wont line up.

-shiv

[CASHBY]

whoops, i clicked the wrong one when opening.

nevermnd

[OpenFlash]

[CASHBY]

ok so i used the new software v1.01 to load it and threw even more codes now. through a DTC code, tire flat code, engine malfunction code.

once again put back to stock and they all went away.

any ideas?

[PresaMat]

CEA3,
Make sure you are actually loading the 1.45 file. It might be loading an old file I noticed it does that sometimes. Did you make sure to uninstall the old software? Uninstall the old software delete the old maps - reinstall the new software make sure to load the new map. Also check that the install is correct.

Mat

[CASHBY]

ive loaded before and know how to do it, this time its just throwing codes, i clicked the wrong icon at first and loaded the map with the old software, and then redid it all with new software v1.01.

no idea.

[PresaMat]

CEA3,
Try reinstalling the old software and reload the old map. See if it works then.
If not... check your physical install make sure you didnt cross a wire or something.

Mat