fuel mixture codes

STONEY_M5 · 02-24-2013, 05:34 PM

Just installed a jb4 g5 and immediately get codes 29E0 and 2A2B fuel mixture control... I had these codes pop up b4 with the jb+ and my dinan tune but after clearing them and resetting adaptations I never saw them again till now...

PR3CI5N · 02-24-2013, 05:37 PM

Which firmware r u running? And how much E-85 did you add and how much 91/93 r u running?

enrita · 02-24-2013, 05:39 PM

i suppose you are not running dinan flash anymore?

STONEY_M5 · 02-24-2013, 05:49 PM

Firmware 16b no e85

STONEY_M5 · 02-24-2013, 05:51 PM

Yes dinan is in there I have the settings for flash/1m/335is

STONEY_M5 · 02-24-2013, 06:06 PM

It throws the codes at idle... if it clear it it goes away but comes back if I restart the car...

PR3CI5N · 02-24-2013, 06:26 PM

Load 17.hex

And do 2-3 WOT runs from 40mph in 3rd gear all the way into 4th. At the top of 3rd is when the tune does most of its adjusting. It should get rid of these fuel mixture codes.

STONEY_M5 · 02-24-2013, 06:29 PM

Thanks
Will try that and get back to you.... should I rev all the way out to 7 grand then shift and which map should I be in map 5

BeGood69 · 05-04-2013, 06:56 PM

So I have the same problem.. The same exactly same code.. I'm running 19 on jb4 g5 iSO.. No flash.

bv1 · 07-21-2013, 06:22 PM

Can someone explain how they fixed this issue? I'm having the same problem after JB4 G5 ISO install.

02-24-2013, 05:34 PM	#1
STONEY_M5 MAAD HEAD 62 Rep 1,128 Posts Drives: 2010 X5M 2013 M5 Join Date: Jan 2010 Location: NYC iTrader: (4) Garage List 13 F10 M5 [0.00] 2010 X5M [0.00] 07 335i [9.26]	fuel mixture codes Just installed a jb4 g5 and immediately get codes 29E0 and 2A2B fuel mixture control... I had these codes pop up b4 with the jb+ and my dinan tune but after clearing them and resetting adaptations I never saw them again till now... __________________ F10 M5 e70 X5M Sold E90 335i
	Appreciate 0 Tweet Quote

02-24-2013, 05:37 PM	#2
PR3CI5N need4speed 510 Rep 1,903 Posts Drives: 2010 E90 M 335i Join Date: Jun 2010 Location: West Coast iTrader: (24)	Which firmware r u running? And how much E-85 did you add and how much 91/93 r u running?
	Appreciate 0 Quote

02-24-2013, 05:39 PM	#3
enrita Major General 159 Rep 7,378 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	i suppose you are not running dinan flash anymore? __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

02-24-2013, 05:49 PM	#4
STONEY_M5 MAAD HEAD 62 Rep 1,128 Posts Drives: 2010 X5M 2013 M5 Join Date: Jan 2010 Location: NYC iTrader: (4) Garage List 13 F10 M5 [0.00] 2010 X5M [0.00] 07 335i [9.26]	Firmware 16b no e85 __________________ F10 M5 e70 X5M Sold E90 335i
	Appreciate 0 Quote

02-24-2013, 05:51 PM	#5
STONEY_M5 MAAD HEAD 62 Rep 1,128 Posts Drives: 2010 X5M 2013 M5 Join Date: Jan 2010 Location: NYC iTrader: (4) Garage List 13 F10 M5 [0.00] 2010 X5M [0.00] 07 335i [9.26]	Yes dinan is in there I have the settings for flash/1m/335is __________________ F10 M5 e70 X5M Sold E90 335i
	Appreciate 0 Quote

02-24-2013, 06:06 PM	#6
STONEY_M5 MAAD HEAD 62 Rep 1,128 Posts Drives: 2010 X5M 2013 M5 Join Date: Jan 2010 Location: NYC iTrader: (4) Garage List 13 F10 M5 [0.00] 2010 X5M [0.00] 07 335i [9.26]	It throws the codes at idle... if it clear it it goes away but comes back if I restart the car...
	Appreciate 0 Quote

02-24-2013, 06:26 PM	#7
PR3CI5N need4speed 510 Rep 1,903 Posts Drives: 2010 E90 M 335i Join Date: Jun 2010 Location: West Coast iTrader: (24)	Load 17.hex And do 2-3 WOT runs from 40mph in 3rd gear all the way into 4th. At the top of 3rd is when the tune does most of its adjusting. It should get rid of these fuel mixture codes. __________________ N54
	Appreciate 0 Quote

02-24-2013, 06:29 PM	#8
STONEY_M5 MAAD HEAD 62 Rep 1,128 Posts Drives: 2010 X5M 2013 M5 Join Date: Jan 2010 Location: NYC iTrader: (4) Garage List 13 F10 M5 [0.00] 2010 X5M [0.00] 07 335i [9.26]	Thanks Will try that and get back to you.... should I rev all the way out to 7 grand then shift and which map should I be in map 5
	Appreciate 0 Quote

05-04-2013, 06:56 PM	#9
BeGood69 Private 19 Rep 68 Posts Drives: 2007 335i, black, JB4 G5 Join Date: Aug 2008 Location: El Paso, TX 79934 iTrader: (1)	So I have the same problem.. The same exactly same code.. I'm running 19 on jb4 g5 iSO.. No flash.
	Appreciate 0 Quote

07-21-2013, 06:22 PM	#10
bv1 Private First Class 6 Rep 169 Posts Drives: 335i Coupe AT Join Date: Jan 2011 Location: Toronto iTrader: (0)	Can someone explain how they fixed this issue? I'm having the same problem after JB4 G5 ISO install. __________________ \|Cobb AP / JB4 \| DCI \| BMS WW Meth Kit \| AMS FMIC \| Macht Schnell 3" DP \|
	Appreciate 0 Quote