[nsquared]

Originally Posted by Eurocraze

Hell with emissions and safety lol ok then, I'll have to look at somewhere then to get it done

I said you could get your tails done at Envisions lol...

[WrkAddict12]

Originally Posted by REP1KRR

A few have asked about CODING lately.




Anyone interested in CODING? I've got a cable from Mike Benvo (BPMSport).

His offer is $200 if we can get 3 people or more to do it. That's cheaper than last go around!

Two hundred bucks gets you EVERYTHING (ALL coding features, except BMW Live, or Internet) -

Coding/Individualization
- EURO MDM mode! (E9x M3/ E6x M5/ E6x M6)
- Video In Motion (CIC iDrive models only)
- Remove BulbCheck errors (for HID/LED or aftermarket lighting retrofits)
- Windshield Wipers complete full cycle when ignition is shut off
- Remove Ignition/Door gong
- Remove iDrive [ACCEPT] screen
- Remove Seatbelt warning gong for Driver, Passenger or both Driver/Passenger (light remains on dash)
- Unlock doors when key is ejected
- A/C off when Auto Climate is pressed
- Auto Sunroof close when rain is detected
- Open/Close windows with Key FOB
- Open/Close Windows with Comfort Access
- Open/Close Convertible Top with Key FOB
- AutoFolding Mirrors
- Change Low Fuel Warning from 1/4 tank to 1/8 tank
- Remove CityLights (Amber sidemarkers)
- Enable FogLamps with High Beams
- Factory Angel Eye Brightness Coding! Make it whiter and brighter! (2009-13 only)
- Disable Window Safety Feature (allows windows to continue rolling up while door is open)
- Enable Digital Speedometer in OLED gauge cluster
- Enable/Disable auto-correction for Digital Speedometer/MPG
- Euro Hazard Lamps (double flash vs US single flash)
- Triple Blink turn signals
- Mirror Curb tilt
- Automatic Door Locking
- Auto Trunk/Tailgate Closing
- LCI retrofit
- Alarm retrofit
- Complimentary fault code reading and clearing
- Freeze frame on-board data (max rpm, times to redline, max speed, etc)

Descriptions here - http://bpmsport.com/Coding.pdf

I'd do this for $200!!

[Mr Hahn]

I only want my corner lights off, but if coding is $200 for each car then I'll just leave them on.

[REP1KRR]

Originally Posted by Eurocraze

Wanna take off my turn signals as running lights

Euro corner delete:
a. Turn off amber corners when headlights are on

Originally Posted by nsquared

I sent you his username but his real name is Christian. Haven't seen him post in a while.

That's me.

Originally Posted by Redadair

Just wondering, can coding turn a 330i into an F82 M4?

I'll ask.

Originally Posted by nsquared

Sounds good.

Lunch sat and do my installs at Parkers?

That's +1.

Originally Posted by Eurocraze

Yea interested in coding too.. Group buy deal??
Lol

That's +2.

Originally Posted by nsquared

Is the group buy $200 each or $200 total and split it 3 ways?

Each. Duh.

Originally Posted by iNguyen

What if you don't want everything? How much will it cost me to do a couple of codes?

$50/ea item, so doing the whole car and getting everything is certainly the way to go.

Originally Posted by WrkAddict12

I'd do this for $200!!

That's +3.

Originally Posted by Mr Hahn

I only want my corner lights off, but if coding is $200 for each car then I'll just leave them on.

$50/ea item, so doing the whole car and getting everything is certainly the way to go.

[REP1KRR]

So, we've got -

1. Eurocraze
2. nsquared
3. WrkAddict12

Anyone else?

Committed? I can schedule it with Mike.

We can do this at Parker's, if he's got Wi-fi.

[Park2670]

Originally Posted by REP1KRR

We can do this at Parker's, if he's got Wi-fi.

What time were you guys thinking? I have quick Wi-Fi, but only a two car garage if we need to be inside.

[REP1KRR]

Originally Posted by Park2670

What time were you guys thinking? I have quick Wi-Fi, but only a two car garage if we need to be inside.

Only need 1 spot in the garage, for the car being coded. One at a time. Assembly line action.

[Park2670]

Originally Posted by REP1KRR

Only need 1 spot in the garage, for the car being coded. One at a time. Assembly line action.

Okay perfect.

[nsanbyker]

Need to buy my lci tails and combox so I can get coded too ;(

[Eurocraze]

U have the cable Dreiser??

[REP1KRR]

Originally Posted by nsanbyker

Need to buy my lci tails and combox so I can get coded too ;(

I think you need a supercharger FIRST!!

[nsanbyker]

Originally Posted by REP1KRR

I think you need a supercharger FIRST!!

Gonna see if you like yours and then borrow it for a trial period

[REP1KRR]

Originally Posted by Dreiser

Im pretty savy with coding im sure it can't be too hard. Im going to use my dads e92 as a test to code before i do mine. but from what I have read it isn't too difficult. Im going to try this weekend and I will let you guys know if it works!

Originally Posted by Eurocraze

U have the cable Dreiser??

Why would you go thru the heart ache, pain, and risk of messing with your car (!), when you could have the best BMW coder (arguably, of course, but my honest opinion)** do EVERYTHING (proven method/code) for two hundred bucks? Did I mention it's everything?? (no disrespect!)

Perhaps others who've had the coding done could chime in on the experience.
nsanbyker (jay), and babino.

** I get nothing from selling Mike's services, btw. We've become friends only thru my professional dealings/relationship with him. I've seen his work, and it's UNMATCHED. Truly. His performance tunes are even more impressive.

[iNguyen]

Originally Posted by REP1KRR

So, we've got -

1. Eurocraze
2. nsquared
3. WrkAddict12

Anyone else?

Committed? I can schedule it with Mike.

We can do this at Parker's, if he's got Wi-fi.

yeah i want to get my car coded too! but day are you guys thinking of doing this?

[nsquared]

Originally Posted by REP1KRR

So, we've got -

1. Eurocraze
2. nsquared
3. WrkAddict12

Anyone else?

Committed? I can schedule it with Mike.

We can do this at Parker's, if he's got Wi-fi.

I am not committed yet. I don't have $200 to spend on coding .

[nsquared]

Originally Posted by Park2670

What time were you guys thinking? I have quick Wi-Fi, but only a two car garage if we need to be inside.

I have a meeting 9am-1pm so for me after 1.

[REP1KRR]

**UPDATED**

1. Eurocraze (UNconfirmed)
2. iNguyen (confirmed)
3. WrkAddict12 (confirmed)

Anyone else?

[REP1KRR]

Originally Posted by iNguyen

yeah i want to get my car coded too! but day are you guys thinking of doing this?

Whenever is convenient for you three.

[Mr Hahn]

$50 just to code the corners, and this is the group price? Sounds a little like the Comcast "buy the bundle or take the shaft" price plan.

Let me know how it turns out Dreiser, I've also got an e92.

[REP1KRR]

Originally Posted by Mr Hahn

$50 just to code the corners, and this is the group price? Sounds a little like the Comcast "buy the bundle or take the shaft" price plan.

Let me know how it turns out Dreiser, I've also got an e92.

There's no shaft involved. Nobody is getting ripped off. Participate or don't. Please don't bash on the offer. We're a close group of local enthusiasts on this thread. It's a very fair price. Find another coder, with comparable reputation, to code a single item for less than $50. My recommendation is to do the whole thing while you're connected and talking to Mike, rather than doing a single item. It takes just about as much time (about 1/2 as long, I'd estimate) and attention to code a single item as it does to code everything. I assume you can understand this, from a time/cost point of view?

Welcome to the board.

[Mr Hahn]

I was just making a joke, hence the Comcast reference. I'll use one of these next time.

[Park2670]

Originally Posted by Mr Hahn

I was just making a joke, hence the Comcast reference. I'll use one of these next time.

No harm it is quite difficult to sense sarcasm over text. I know this quite well.