E90Post
 


 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > BMW Coding > For Help with NCSExpert Errors



Reply
 
Thread Tools Search this Thread
      04-12-2014, 09:41 AM   #155
cryptomit
Captain
91
Rep
713
Posts

Drives: 320d 2012
Join Date: Dec 2013
Location: AS

iTrader: (0)

Just instal Standard Tools 2.12 and update Ediabas with daten 50.2 - after this all will be fine. Good luck!
Appreciate 0
      04-20-2014, 05:59 AM   #156
ABE92
Private First Class
26
Rep
180
Posts

Drives: 335i E92
Join Date: Jun 2012
Location: Perth

iTrader: (0)

NCSExpert Error - Battery Coding to Braille 31AH

Hi All,

I have recently replaced the oem battery with braille 21lbs - 31AH. I have tried to code the battery as per the link below:

" google - bmw coding forum Help creating this DIY for battery replacement and registration "

During step 7 of section B under procedure B (code changes to car after doing changes to CAS and NFRM modules), I get the following error message:




and the error log is as follows:











My setup version is as follows:

Car: BMW 335i 2008 N54 with Alpina Flash

INPA Version 5.0.2
Ediabas Version 6.4.7
NCS Expert 3.1.0
SP-DATEN-E89-V48.1-LITE

on Windows XP Mode via Windows 7 64 Bit

Will appreciate if you could help me to clarify the above error log.

Thanks,
Alex

Last edited by ABE92; 04-20-2014 at 06:08 AM..
Appreciate 0
      04-29-2014, 08:24 PM   #157
Famous87
New Member
2
Rep
16
Posts

Drives: Silver
Join Date: Mar 2013
Location: United States

iTrader: (0)

I just tried to code my '07 E92 for the digital speedometer and I go the following errors.

[20:55:45.106] [2014-04-29] [SERIE] 2020 PABD/CABD A_GBFA.IPS Ident 543
[20:55:45.106] [2014-04-29] [SERIE] SG antwortet nicht : ERROR_ECU_GENERAL_REJECT

[20:55:45.218] [2014-04-29] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6
[20:55:45.218] [2014-04-29] [SERIE] SG antwortet nicht CODIERINDEX_LESEN

[20:55:46.575] [2014-04-29] [SERIE] 2020 PABD/CABD A_GBBF.IPS Ident 543
[20:55:46.575] [2014-04-29] [SERIE] SG antwortet nicht : ERROR_ECU_GENERAL_REJECT

[20:55:46.687] [2014-04-29] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6
[20:55:46.687] [2014-04-29] [SERIE] SG antwortet nicht CODIERINDEX_LESEN

================================================== ==============================(2)
[20:58:09.312] [2014-04-29] [SERIE] 4440 Trace CBD_PROC.C GetCbdFile 9
[20:58:09.312] [2014-04-29] [SERIE] Paramaterschlüsselwort ungültig 003020'01,EAM_TIMEDELAY (1598d, 63Eh)

[20:58:09.314] [2014-04-29] [SERIE] 1043 Error CDH.C CDHGetNettoDataFromCbd 1
[20:58:09.314] [2014-04-29] [SERIE] Fehler bei CBD-Dateiverarbeitung MRS5.C08

[20:58:09.425] [2014-04-29] [SERIE] 1043 Error COAPI2.CPP coapiRunCabd 6
[20:58:09.425] [2014-04-29] [SERIE] Fehler bei CBD-Dateiverarbeitung SG_CODIEREN


A error box popped up saying the following;

"Error in CABD! Look at CABI.ERR and Error.LOG!

COAPI-1043: Fehler bei CBD-Dateiverarbeitung MRs5.C08
COAPI-1043: Fehler bei CBD-Dateiverarbeitung SG_CODIEREN


NCS-Expert 4.0.1, and Daten 50.2 files

At this point all I want to know is that nothing's messed up and I think I'll call it quits with coding. I can't handle the stress of messing something up. I also don't know why it's still in German, I followed the windows 7 install to the T.


Any help would be greatly appreciated.

Last edited by Famous87; 04-29-2014 at 09:40 PM..
Appreciate 0
      05-28-2014, 06:45 AM   #158
ezzter
New Member
0
Rep
5
Posts

Drives: E90
Join Date: Dec 2012
Location: Australia

iTrader: (0)

Quote:
Originally Posted by ABE92 View Post
Hi All,

I have recently replaced the oem battery with braille 21lbs - 31AH. I have tried to code the battery as per the link below:

" google - bmw coding forum Help creating this DIY for battery replacement and registration "

During step 7 of section B under procedure B (code changes to car after doing changes to CAS and NFRM modules), I get the following error message:





and the error log is as follows:











My setup version is as follows:

Car: BMW 335i 2008 N54 with Alpina Flash

INPA Version 5.0.2
Ediabas Version 6.4.7
NCS Expert 3.1.0
SP-DATEN-E89-V48.1-LITE

on Windows XP Mode via Windows 7 64 Bit

Will appreciate if you could help me to clarify the above error log.

Thanks,
Alex

Any luck so far?

you might want to try update your daten files to se if any thing changes..

Im also stuck coding anything but my cas unit now. I did update my cars firmware today, might have something to do with that, as i was able to code fine before.

Last edited by ezzter; 05-28-2014 at 06:46 AM.. Reason: spelling
Appreciate 0
      05-28-2014, 06:56 AM   #159
ABE92
Private First Class
26
Rep
180
Posts

Drives: 335i E92
Join Date: Jun 2012
Location: Perth

iTrader: (0)

Yeah, resolved it after I installed a newer version of ncs expert.
Appreciate 0
      07-26-2014, 12:56 AM   #160
tmas88
Private First Class
tmas88's Avatar
United_States
19
Rep
177
Posts

Drives: 2011 335i E90 LCI
Join Date: May 2011
Location: Austin TX

iTrader: (4)

Garage List
2011 BMW 335i  [10.00]
Just got my car back from service, seems like they reverted my coding back and possibly updated my computer (new navigation warning message looks different).

Tried to go back in to code; Loaded Profile, Hit F1, Hit F3, and ended up with:



[00:40:20.042] [2014-07-26] [SERIE] 4514 Trace AT_PROC.C isAuftragValid 1
[00:40:20.042] [2014-07-26] [SERIE] Job invalid Mark Not Valid: +KCBS

[00:40:20.052] [2014-07-26] [SERIE] 1180 Error COAPI4.CPP coapiSetAuftrag 3
[00:40:20.052] [2014-07-26] [SERIE] vehicle job is invalid

[00:40:20.810] [2014-07-26] [SERIE] 1180 Error COAPI2.CPP coapiRunCabd 6
[00:40:20.810] [2014-07-26] [SERIE] vehicle job is invalid FA_READ

[00:40:20.812] [2014-07-26] [SERIE] 1180 Error COAPI4.CPP coapiReadAuftrag 4
[00:40:20.812] [2014-07-26] [SERIE] vehicle job is invalid FA_READ: A_PL2FRX

[00:40:21.545] [2014-07-26] [SERIE] 1180 Error COAPI2.CPP coapiRunCabd 6
[00:40:21.545] [2014-07-26] [SERIE] vehicle job is invalid FA_READ

[00:40:21.547] [2014-07-26] [SERIE] 1180 Error COAPI4.CPP coapiReadAuftrag 4
[00:40:21.547] [2014-07-26] [SERIE] vehicle job is invalid FA_READ: A_E65CAS

[00:40:21.549] [2014-07-26] [SERIE] 1000 Warning COAPI.CPP coapiReadFgNr 9
[00:40:21.549] [2014-07-26] [SERIE] Error CAS

================================================== ==============================(2)
[00:40:22.392] [2014-07-26] [SERIE] 4514 Trace AT_PROC.C isAuftragValid 1
[00:40:22.392] [2014-07-26] [SERIE] Job invalid Mark Not Valid: +KCBS

[00:40:22.395] [2014-07-26] [SERIE] 1180 Error COAPI4.CPP coapiSetAuftrag 3
[00:40:22.395] [2014-07-26] [SERIE] vehicle job is invalid

Using NCSExpert 4.0.1
w/ DATEN 48.1

Any hints?
Appreciate 0
      07-26-2014, 12:09 PM   #161
wildcatcrazy
Banned
wildcatcrazy's Avatar
United_States
519
Rep
1,527
Posts

Drives: E90 335i
Join Date: Oct 2013
Location: USA

iTrader: (12)

Garage List
2009 335i  [0.00]
Update your DATENs to 51 or newer.
Appreciate 0
      07-26-2014, 10:40 PM   #162
tmas88
Private First Class
tmas88's Avatar
United_States
19
Rep
177
Posts

Drives: 2011 335i E90 LCI
Join Date: May 2011
Location: Austin TX

iTrader: (4)

Garage List
2011 BMW 335i  [10.00]
Quote:
Originally Posted by wildcatcrazy View Post
Update your DATENs to 51 or newer.
Thanks, updated to 50.2 and it did the trick! Now to figure out how to get INPAs to read correctly.... always get the versions do not match error
Appreciate 0
      08-09-2014, 02:02 AM   #163
akumetsu
Enlisted Member
akumetsu's Avatar
3
Rep
39
Posts

Drives: 330i AW
Join Date: Nov 2009
Location: Ontario

iTrader: (0)

Guys I have the same problem. I need to remove $524. I did it successfully for CAS. But, when I change ECU to FRM, I'm getting this error:

Error in CABD! Look at CABI.ERR and ERROR.LOG!

COAPI-2000: Fehler in EDIABAS oder in SG-Beschreibungsdatei
SYS-0005: SG-Beschreibungsdatei nicht gefunded FRM_87
COAPI-2000: Fehler in EDIABAS oder in SG-Beshcreibungsdatei
SG_CODIEREN

Please help me I've been stuck for 5 days now...

Im using SP Daten 50.2 and Standard_Tools_12.2
__________________
Appreciate 0
      08-09-2014, 07:02 AM   #164
Scaff™
lowlife
Scaff™'s Avatar
United Kingdom
9
Rep
95
Posts

Drives: BMW 320D Touring
Join Date: Apr 2014
Location: United Kingdom

iTrader: (1)

SORTED
__________________
Instagram: SCAFF_VR6

Last edited by Scaff™; 08-09-2014 at 09:02 AM..
Appreciate 0
      10-04-2014, 10:33 AM   #165
UsualSuspect
Lieutenant General ***
UsualSuspect's Avatar
United_States
59
Rep
751
Posts

Drives: this way and that way...
Join Date: Feb 2009
Location: Boston

iTrader: (4)

I have a buddy who had the Alpina tranny flash and his paddles didn't work. I went thru the steps to fix the paddles but I get and error.

(I did now update my E89 files to the latest 53.3. Do you think that was my issue?)

Here's the error log:
[11:54:07.644] [2014-10-03] [SERIE] 2021 Error LFCDHDIA.CPP (A_PL2FRX.IPS/IPO) CDHapiResultText 1
[11:54:07.644] [2014-10-03] [SERIE] Datenuebertragung zum SG gestoert IFH-0010: Datenuebertragung Interface/Steuergeraet gestoert FRM_87

[11:54:07.752] [2014-10-03] [SERIE] 2021 Error COAPI2.CPP coapiRunCabd 6
[11:54:07.752] [2014-10-03] [SERIE] Datenuebertragung zum SG gestoert FA_READ

[11:54:07.753] [2014-10-03] [SERIE] 2021 Error COAPI4.CPP coapiReadAuftrag 4
[11:54:07.753] [2014-10-03] [SERIE] Datenuebertragung zum SG gestoert FA_READ: A_PL2FRX

[11:54:08.123] [2014-10-03] [SERIE] 2021 Error LFCDHDIA.CPP (A_PL2FRX.IPS/IPO) CDHapiResultText 1
[11:54:08.123] [2014-10-03] [SERIE] Datenuebertragung zum SG gestoert IFH-0010: Datenuebertragung Interface/Steuergeraet gestoert FRM_87

[11:54:08.232] [2014-10-03] [SERIE] 2021 Error COAPI2.CPP coapiRunCabd 6
[11:54:08.232] [2014-10-03] [SERIE] Datenuebertragung zum SG gestoert FA_READ

[11:54:08.233] [2014-10-03] [SERIE] 2021 Error COAPI4.CPP coapiReadAuftrag 4
[11:54:08.233] [2014-10-03] [SERIE] Datenuebertragung zum SG gestoert FA_READ: A_PL2FRX

[11:54:08.983] [2014-10-03] [SERIE] 2021 Error COAPI2.CPP coapiRunCabd 6
[11:54:08.983] [2014-10-03] [SERIE] Datenuebertragung zum SG gestoert FA_READ

[11:54:08.984] [2014-10-03] [SERIE] 2021 Error COAPI4.CPP coapiReadAuftrag 4
[11:54:08.984] [2014-10-03] [SERIE] Datenuebertragung zum SG gestoert FA_READ: A_E65CAS

[11:54:08.985] [2014-10-03] [SERIE] 1000 Warning COAPI.CPP coapiReadFgNr 9
[11:54:08.985] [2014-10-03] [SERIE] Fehler CAS

================================================== ==============================(2)
[11:54:31.608] [2014-10-03] [SERIE] 2021 Error LFCDHDIA.CPP (A_GKE11.IPS/IPO) CDHapiResultText 1
[11:54:31.608] [2014-10-03] [SERIE] Datenuebertragung zum SG gestoert IFH-0010: Datenuebertragung Interface/Steuergeraet gestoert GS19D

[11:54:31.715] [2014-10-03] [SERIE] 2021 Error COAPI2.CPP coapiRunCabd 6
[11:54:31.715] [2014-10-03] [SERIE] Datenuebertragung zum SG gestoert SG_CODIEREN

================================================== ==============================(9)
__________________
Everyone has a photographic memory, some just don't have film.
Appreciate 0
      12-10-2014, 04:34 PM   #166
Stuart@BMRAutowerkes
Major General
Stuart@BMRAutowerkes's Avatar
808
Rep
5,530
Posts

Drives: a black car
Join Date: Sep 2010
Location: Sydney

iTrader: (3)

Is this thread still active ?

Here are the errors I am getting:

[13:26:16.488] [2014-12-10] [SERIE] 2000 Error LFCDHDIA.CPP (A_PL2FRX.IPS/IPO) CDHapiResultText 1
[13:26:16.488] [2014-12-10] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei BIP-0001: Zu langer Job-Parameter oder String-Register-Zugriff FRM_87

[13:26:16.591] [2014-12-10] [SERIE] 2000 Error COAPI2.CPP coapiRunCabd 6
[13:26:16.591] [2014-12-10] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei FA_READ

[13:26:16.592] [2014-12-10] [SERIE] 2000 Error COAPI4.CPP coapiReadAuftrag 4
[13:26:16.592] [2014-12-10] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei FA_READ: A_PL2FRX

[13:26:17.089] [2014-12-10] [SERIE] 2000 Error LFCDHDIA.CPP (A_PL2FRX.IPS/IPO) CDHapiResultText 1
[13:26:17.089] [2014-12-10] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei BIP-0001: Zu langer Job-Parameter oder String-Register-Zugriff FRM_87

[13:26:17.193] [2014-12-10] [SERIE] 2000 Error COAPI2.CPP coapiRunCabd 6
[13:26:17.193] [2014-12-10] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei FA_READ

[13:26:17.193] [2014-12-10] [SERIE] 2000 Error COAPI4.CPP coapiReadAuftrag 4
[13:26:17.193] [2014-12-10] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei FA_READ: A_PL2FRX

[13:26:17.813] [2014-12-10] [SERIE] 2000 Error LFCDHDIA.CPP (A_E65CAS.IPS/IPO) CDHapiResultText 1
[13:26:17.813] [2014-12-10] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei BIP-0001: Zu langer Job-Parameter oder String-Register-Zugriff CAS

[13:26:17.917] [2014-12-10] [SERIE] 2000 Error COAPI2.CPP coapiRunCabd 6
[13:26:17.917] [2014-12-10] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei FA_READ

[13:26:17.917] [2014-12-10] [SERIE] 2000 Error COAPI4.CPP coapiReadAuftrag 4
[13:26:17.917] [2014-12-10] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei FA_READ: A_E65CAS

[13:26:17.918] [2014-12-10] [SERIE] 1000 Warning COAPI.CPP coapiReadFgNr 9
[13:26:17.918] [2014-12-10] [SERIE] Fehler NFRM

================================================== ==============================(2)
[13:26:18.552] [2014-12-10] [SERIE] 2000 Error LFCDHDIA.CPP (A_PL2FRX.IPS/IPO) CDHapiResultText 1
[13:26:18.552] [2014-12-10] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei BIP-0001: Zu langer Job-Parameter oder String-Register-Zugriff FRM_87

[13:26:18.657] [2014-12-10] [SERIE] 2000 Error COAPI2.CPP coapiRunCabd 6
[13:26:18.657] [2014-12-10] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei FA_READ

[13:26:18.657] [2014-12-10] [SERIE] 2000 Error COAPI4.CPP coapiReadAuftrag 4
[13:26:18.657] [2014-12-10] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei FA_READ: A_PL2FRX
Appreciate 0
      12-10-2014, 05:08 PM   #167
wildcatcrazy
Banned
wildcatcrazy's Avatar
United_States
519
Rep
1,527
Posts

Drives: E90 335i
Join Date: Oct 2013
Location: USA

iTrader: (12)

Garage List
2009 335i  [0.00]
It sounds like you don't have the full set of DATENs. Is this a 32 or 64 bit machine?
Appreciate 0
      12-25-2014, 05:25 PM   #168
dy63
Colonel
United Kingdom
160
Rep
2,399
Posts

Drives: F30
Join Date: Aug 2014
Location: United Kingdom

iTrader: (1)

merry christmas all!

im trying to code high beam on when unlocking my car. INPA works fine however wen i go into NCS. Loads expert mode. F1 - F3 then select e89. then select cas. i get this error

can anyone help what it might be?

Appreciate 0
      02-09-2015, 09:57 PM   #169
undecided
Captain
undecided's Avatar
United_States
83
Rep
985
Posts

Drives: 08 M5 Sapphire Black
Join Date: Oct 2005
Location: CT

iTrader: (0)

Garage List
2008 335xi SOLD!!!! ...  [0.00]
2008 M5  [0.00]
Car is an 08 M5. CIC Retrofir from 2010 535i. Error below.

Trying different things to write defaults to the CIC. VO Order was changed with no issues. Tried DATEN 50.2 and 54. This is an E60.



[22:39:34.982] [2015-02-09] [SERIE] 2020 Error LFCDHDIA.CPP (A_CIC.IPS/IPO) CDHapiResultText 1
[22:39:34.982] [2015-02-09] [SERIE] SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht CICR

[22:39:35.084] [2015-02-09] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6
[22:39:35.084] [2015-02-09] [SERIE] SG antwortet nicht SG_CODIEREN

================================================== ==============================
[22:40:09.934] [2015-02-09] [SERIE] 2020 Error LFCDHDIA.CPP (A_CIC.IPS/IPO) CDHapiResultText 1
[22:40:09.934] [2015-02-09] [SERIE] SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht CICR

[22:40:10.036] [2015-02-09] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6
[22:40:10.036] [2015-02-09] [SERIE] SG antwortet nicht CODIERINDEX_LESEN

================================================== ==============================(2)
[22:41:55.345] [2015-02-09] [SERIE] 2020 Error LFCDHDIA.CPP (A_CIC.IPS/IPO) CDHapiResultText 1
[22:41:55.345] [2015-02-09] [SERIE] SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht CICR

[22:41:55.447] [2015-02-09] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6
[22:41:55.447] [2015-02-09] [SERIE] SG antwortet nicht AIF_LESEN
Appreciate 0
      02-10-2015, 07:34 AM   #170
cryptomit
Captain
91
Rep
713
Posts

Drives: 320d 2012
Join Date: Dec 2013
Location: AS

iTrader: (0)

This log means that you don't have a connection with your CIC at all.
Appreciate 0
      02-10-2015, 10:10 AM   #171
undecided
Captain
undecided's Avatar
United_States
83
Rep
985
Posts

Drives: 08 M5 Sapphire Black
Join Date: Oct 2005
Location: CT

iTrader: (0)

Garage List
2008 335xi SOLD!!!! ...  [0.00]
2008 M5  [0.00]
Thank you, I found the translation. Need help to fix though.

Quote:
Originally Posted by cryptomit View Post
This log means that you don't have a connection with your CIC at all.
In english it says:
IFH-0009: ECU isn’t connected or doesn’t respond

Now, I can code VO and read FSW PSW files using ncs. It's just the CIC I can't read/write. What would be the culprit? I do have a CIC Emulator/Filter on the CAN lines to enable the navigation. I have seen conflicting information about removing it in order to perform the coding. What do you think?

I have also been able to read the CIC Vin with SWID Reader but I did get an IFH-0009 from it when I tried to get the 1B file.

Last edited by undecided; 02-10-2015 at 10:18 AM..
Appreciate 0
      02-14-2015, 02:28 PM   #172
undecided
Captain
undecided's Avatar
United_States
83
Rep
985
Posts

Drives: 08 M5 Sapphire Black
Join Date: Oct 2005
Location: CT

iTrader: (0)

Garage List
2008 335xi SOLD!!!! ...  [0.00]
2008 M5  [0.00]
Coding worked fine once I disconnected the emulator.

Thx. everyone
Appreciate 0
      03-13-2015, 10:03 PM   #173
Hoooper
Colonel
213
Rep
2,210
Posts

Drives: 335D
Join Date: Jun 2013
Location: Petaluma, CA

iTrader: (0)

[19:58:50.940] [2015-03-13] [SERIE] 2020 Error LFCDHDIA.CPP (A_PL2FRX.IPS/IPO) CDHapiResultText 1
[19:58:50.940] [2015-03-13] [SERIE] SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht FRM_70

[19:58:51.086] [2015-03-13] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6
[19:58:51.086] [2015-03-13] [SERIE] SG antwortet nicht CODIERDATEN_LESEN

I'm getting those errors trying to read the nfrm after it has already been read and written. Can't seem to read it anymore. Any thoughts?
Appreciate 0
      05-01-2015, 12:30 AM   #174
johmei
Private First Class
johmei's Avatar
Sweden
6
Rep
180
Posts

Drives: BMW E90 M3 ZCP
Join Date: Mar 2012
Location: Sweden

iTrader: (1)

Garage List
I have not coded my car more than a year and have a new install of INPA, Ediabas and NCS on a Windows 7 32bit install. INPA works just fine but when I open CAS (or NFRM) module in NCS I get the attached error. Not able to find any good info on what this is? Is it the wrong build date in FA/VO?
Can I continue coding allthough I get this error?
Attached Images
 
__________________
E90 M3 ZCP 2010
E92 335i 2007 black edition
Appreciate 0
      05-01-2015, 01:31 AM   #175
wildcatcrazy
Banned
wildcatcrazy's Avatar
United_States
519
Rep
1,527
Posts

Drives: E90 335i
Join Date: Oct 2013
Location: USA

iTrader: (12)

Garage List
2009 335i  [0.00]
Quote:
Originally Posted by johmei
I have not coded my car more than a year and have a new install of INPA, Ediabas and NCS on a Windows 7 32bit install. INPA works just fine but when I open CAS (or NFRM) module in NCS I get the attached error. Not able to find any good info on what this is? Is it the wrong build date in FA/VO?
Can I continue coding allthough I get this error?
Edit to #0907 and see if that works. You won't be able to code unless this issue is resolved.
Appreciate 0
      05-01-2015, 01:54 AM   #176
johmei
Private First Class
johmei's Avatar
Sweden
6
Rep
180
Posts

Drives: BMW E90 M3 ZCP
Join Date: Mar 2012
Location: Sweden

iTrader: (1)

Garage List
Quote:
Originally Posted by wildcatcrazy View Post
Edit to #0907 and see if that works. You won't be able to code unless this issue is resolved.
Thanks for your reply. My prod date is 2007-08-23 so I'll try 0907 and 0908 if that does not help.
Ok, I just follow the steps for VO change to edit this?

I need to code out the seat airbags as I get all kinds of warnings since I changed to racing seats.
__________________
E90 M3 ZCP 2010
E92 335i 2007 black edition
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:20 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST