FRM DIY

dleccord · 01-02-2018, 04:23 AM

Do we need to have dealer install this or can we DIY?

ptpending · 01-02-2018, 07:41 AM

you can replace and code it without dealer if you have correct frm and appropriate software

SG_E90 · 01-02-2018, 12:21 PM

^ you only need to code if it was pulled from a different chassis.

Should be plug n play for the most part.

mweisdorfer · 01-02-2018, 02:32 PM

Quote:

Originally Posted by dleccord

Do we need to have dealer install this or can we DIY?

You can replace it without too much difficulty. It does need to be coded to the DME. I think if you have the Foxwell / Scawben scanner you can code it, but don't quote me on that.

The dealer can code it, but they will charge you at least $100.00 to do so.

A local shop that specializes in European Autos can probably do it for a lot less. I had a new FRM module on an X5 coded for about $50.00 once.

01-02-2018, 04:23 AM	#1
dleccord Captain 99 Rep 840 Posts Drives: 2011 BMW 335i E90 Join Date: Apr 2016 Location: Nelson, New Zealand iTrader: (0)	FRM DIY Do we need to have dealer install this or can we DIY?
	Appreciate 0 Tweet Quote

01-02-2018, 07:41 AM	#2
ptpending Colonel 456 Rep 2,749 Posts Drives: e91 Join Date: Dec 2013 Location: Poland iTrader: (1)	you can replace and code it without dealer if you have correct frm and appropriate software __________________ E81 2007 130i 6cylinder Montego blue Retrofits: Harman Kardon, High-beam assistant, Removable tow hitch. Auto-dim folding exterior mirrors. Lumbar support. Perfomance Brakes.
	Appreciate 0 Quote

01-02-2018, 12:21 PM	#3
SG_E90 DaZuc 72 Rep 161 Posts Drives: S65 1M Clone Join Date: Nov 2017 Location: NY iTrader: (0)	^ you only need to code if it was pulled from a different chassis. Should be plug n play for the most part.
	Appreciate 0 Quote