|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Help With Diverter Valve Line!!
|
|
12-04-2016, 03:51 PM | #1 |
Private First Class
49
Rep 101
Posts |
Help With Diverter Valve Line!!
Hey guys so long story short I just picked up my 07 335i e92 a few months ago it needed the turbos replaced( i was told from seller) car is in limp mode now and has been since day one , after I replaced pretty good turbos with new ones turns out car had turbos replaced at 40k miles with the recall warranty. Anyways I installed a BMS charge pipe and I have no idea where the vacuum line goes comeing from the 2 diverter valves????
There's a tiny small nipple LOOKING thing that the line look like it goes to on the side of the intake manifold but it's way to small to hold a line in place secure, I've seen pics online and most people's looks like there going behind the intake manifold, I've had my hand behind There trying to feel for a nipple to attach the line to but can't feel nothing.. here's a pic Any help would be nice I can hear a boost leak when I turn the car off Tried to upload pics but not working from my iPhone but it's the line that comes from the two diverter valves, there's a line that connects them both then comes out into one line where's it go?? |
12-04-2016, 04:29 PM | #2 |
Private First Class
48
Rep 146
Posts |
It needs to go to the intake manifold like you say. If it does'nt fit the nipple then the nipple probably broke and you have to drill it out and tap a new one
|
Appreciate
0
|
12-04-2016, 05:46 PM | #4 |
Private First Class
49
Rep 101
Posts |
|
Appreciate
0
|
Bookmarks |
|
|