Updated: Bought a 135 M sport

Ingeniator · 02-13-2014, 06:23 AM

Ok I may have found what I'm looking for. Please see linked ad. 09 135I Msport. Do you think the price is right for a front end rebuild minus engine cost. The thing sounds perfect for a guy like me who would end up heavily moding the front panels anyway. Take a look and let me know what you think.

Kijiji 135 Msport $9500

Randomaccess335 · 02-13-2014, 09:45 AM

If I had the money to spend I'd buy it..... Sounds like a great deal

Maybe upgrade turbos while fixing the cradle
R

Ingeniator · 02-19-2014, 10:45 AM

Hey anyone pull a driveshaft on these cars. Any special tools or are they just regular U joints.

135Pats · 02-19-2014, 10:51 AM

Quote:

Originally Posted by Ingeniator

Hey anyone pull a driveshaft on these cars. Any special tools or are they just regular U joints.

Regular joint but it’s a BMW…of course it requires expensive and obnoxious tools.

http://www.hpashop.com/AR-Design-N54...4diff-tool.htm

Ingeniator · 02-19-2014, 11:01 AM

Quote:

Originally Posted by 135Pats

Regular joint but it’s a BMW…of course it requires expensive and obnoxious tools.

http://www.hpashop.com/AR-Design-N54...4diff-tool.htm

Do I need the diff tools just to pull the driveshaft for flat towing the rear?

Ingeniator · 02-19-2014, 02:39 PM

Bought it. I don't need the interior and he is interested in it for his M3 what is the going rate for seat door panel etc.

http://www.kijiji.ca/v-cars-trucks/e...ationFlag=true

oby_1 · 02-19-2014, 03:11 PM

nice, looks like you have quite the fun project ahead....

Ingeniator · 02-20-2014, 01:09 PM

So does anyone have an opinion on what I should ask him for the Interior. All seats and door panels.

02-20-2014, 01:28 PM

Quote:

Originally Posted by Ingeniator

So does anyone have an opinion on what I should ask him for the Interior. All seats and door panels.

Just troll ebay and find out how much others have sold theirs for...looks like ~$1000 for the seats, ~$300 for the door panels, etc...on the high end, at least.

Ingeniator · 02-20-2014, 01:47 PM

Quote:

Originally Posted by FCobra94

Just troll ebay and find out how much others have sold theirs for...looks like ~$1000 for the seats, ~$300 for the door panels, etc...on the high end, at least.

Ok that was around what I was thinking. I'll look for a little more to see what I can get.

Look forward to a build thread once I get it home and get some measurements. Does anyone have dimensions for a cage. If not I'll make sure to keep track and post that also.

GetSomeE92 · 02-20-2014, 03:24 PM

Make sure you find out exactly what parts he wants out of the interior so you don't end up selling away things that you'll want/need and have to replace.

Ingeniator · 02-20-2014, 04:29 PM

Quote:

Originally Posted by GetSomeE92

Make sure you find out exactly what parts he wants out of the interior so you don't end up selling away things that you'll want/need and have to replace.

He is just looking for the seats and door panels to swap colours. I'm gutting the interior anyway and would have parted them out.

GMD · 02-20-2014, 07:07 PM

I would be interested in buying the CF interior trim!

805beemer · 02-20-2014, 07:31 PM

I'll take the cup holder. Also would be interested in the radio if you have logic 7 and the radio has the built in Bluetooth and USB.

Ingeniator · 02-20-2014, 08:46 PM

Quote:

Originally Posted by GMD

I would be interested in buying the CF interior trim!

Quote:

Originally Posted by 805beemer

I'll take the cup holder. Also would be interested in the radio if you have logic 7 and the radio has the built in Bluetooth and USB.

I'll keep you guys in mind.

Anyone recognize that charge pipe?

arcticcat522 · 02-20-2014, 11:10 PM

ive never seen a charge pipe like that....im also interested in the cf trim pieces. I could prob. grab them one day if you are close.

Adam

Ingeniator · 02-20-2014, 11:53 PM

Quote:

Originally Posted by arcticcat522

ive never seen a charge pipe like that....im also interested in the cf trim pieces. I could prob. grab them one day if you are close.

Adam

I'm in fort mac. Picking the car up this weekend/week. Once I start it on it. I'll let everyone know what is available.

silver07335i · 02-21-2014, 12:06 AM

Cool project car.

rooringhusky · 02-21-2014, 01:16 AM

Quote:

Originally Posted by Ingeniator

I'll keep you guys in mind.

Anyone recognize that charge pipe?

Charge pipe is a "Z shift" charge pipe...nice pickup BTW look forward to the build

02-13-2014, 06:23 AM	#1
Ingeniator Major 34 Rep 1,093 Posts Drives: 07 335XI(90) 09 135I(82) Join Date: Nov 2013 Location: Fort Mac, Alberta iTrader: (1)	Updated: Bought a 135 M sport Ok I may have found what I'm looking for. Please see linked ad. 09 135I Msport. Do you think the price is right for a front end rebuild minus engine cost. The thing sounds perfect for a guy like me who would end up heavily moding the front panels anyway. Take a look and let me know what you think. Kijiji 135 Msport $9500 __________________ 07 335XI (A008006) 6AT ~94K miles JB4 G5 ISO VSRF DP's 09 135I M (VK80379) 6MT. Race Project car. 1) Install Cobb/piggyback? and Motiv 600 Kit[HTA3076R w/ tial .82] 2) JRZ or Moton suspension. 3) Build high flow intake manifold with multi-port fuel and relocate OFH 4) Build full cage 5) Complete staged twin setup with HTA4205R [w/Tial 1.16] 6) Complete dry sump system Last edited by Ingeniator; 02-19-2014 at 05:41 PM.. Reason: Updated
	Appreciate 0 Tweet Quote

02-13-2014, 09:45 AM	#2
Randomaccess335 Captain 69 Rep 868 Posts Drives: 07' 335I Join Date: Mar 2011 Location: boynton beach, Fl iTrader: (11)	If I had the money to spend I'd buy it..... Sounds like a great deal Maybe upgrade turbos while fixing the cradle R __________________ JB4 G5 ISO , AR DP's, DO Meth kit Trunk Mount, ETS 5" Intercooler, M6 Rims, ER Charge Pipe, Fordged DV's, MMp relocated inlets, Ebay 4" chrome Tips, Lux Angel Eyes ********11.910 @ 117.091.851 60'*********
	Appreciate 0 Quote

02-19-2014, 10:45 AM	#3
Ingeniator Major 34 Rep 1,093 Posts Drives: 07 335XI(90) 09 135I(82) Join Date: Nov 2013 Location: Fort Mac, Alberta iTrader: (1)	Hey anyone pull a driveshaft on these cars. Any special tools or are they just regular U joints. __________________ 07 335XI (A008006) 6AT ~94K miles JB4 G5 ISO VSRF DP's 09 135I M (VK80379) 6MT. Race Project car. 1) Install Cobb/piggyback? and Motiv 600 Kit[HTA3076R w/ tial .82] 2) JRZ or Moton suspension. 3) Build high flow intake manifold with multi-port fuel and relocate OFH 4) Build full cage 5) Complete staged twin setup with HTA4205R [w/Tial 1.16] 6) Complete dry sump system
	Appreciate 0 Quote

02-19-2014, 02:39 PM	#6
Ingeniator Major 34 Rep 1,093 Posts Drives: 07 335XI(90) 09 135I(82) Join Date: Nov 2013 Location: Fort Mac, Alberta iTrader: (1)	Bought it. I don't need the interior and he is interested in it for his M3 what is the going rate for seat door panel etc. http://www.kijiji.ca/v-cars-trucks/e...ationFlag=true Attached Images __________________ 07 335XI (A008006) 6AT ~94K miles JB4 G5 ISO VSRF DP's 09 135I M (VK80379) 6MT. Race Project car. 1) Install Cobb/piggyback? and Motiv 600 Kit[HTA3076R w/ tial .82] 2) JRZ or Moton suspension. 3) Build high flow intake manifold with multi-port fuel and relocate OFH 4) Build full cage 5) Complete staged twin setup with HTA4205R [w/Tial 1.16] 6) Complete dry sump system
	Appreciate 0 Quote

02-19-2014, 03:11 PM	#7
oby_1 Private 3 Rep 86 Posts Drives: 335i E90 Join Date: May 2013 Location: Houston iTrader: (0)	nice, looks like you have quite the fun project ahead....
	Appreciate 0 Quote

02-20-2014, 01:09 PM	#8
Ingeniator Major 34 Rep 1,093 Posts Drives: 07 335XI(90) 09 135I(82) Join Date: Nov 2013 Location: Fort Mac, Alberta iTrader: (1)	So does anyone have an opinion on what I should ask him for the Interior. All seats and door panels. __________________ 07 335XI (A008006) 6AT ~94K miles JB4 G5 ISO VSRF DP's 09 135I M (VK80379) 6MT. Race Project car. 1) Install Cobb/piggyback? and Motiv 600 Kit[HTA3076R w/ tial .82] 2) JRZ or Moton suspension. 3) Build high flow intake manifold with multi-port fuel and relocate OFH 4) Build full cage 5) Complete staged twin setup with HTA4205R [w/Tial 1.16] 6) Complete dry sump system
	Appreciate 0 Quote

02-20-2014, 03:24 PM	#11
GetSomeE92 Major 36 Rep 1,176 Posts Drives: '09 Space Gray E92 Join Date: Mar 2011 Location: Miami, FL iTrader: (7)	Make sure you find out exactly what parts he wants out of the interior so you don't end up selling away things that you'll want/need and have to replace. __________________ 335i Coupe, JB4 (G4, map 5) DCI and 40% E85 blend: 2009 BMW 335i Coupe: 12.173 @ 109.490 MPH
	Appreciate 0 Quote

02-20-2014, 07:07 PM	#13
GMD Enlisted Member 0 Rep 35 Posts Drives: 135i Join Date: Sep 2013 Location: United States iTrader: (0)	I would be interested in buying the CF interior trim!
	Appreciate 0 Quote

02-20-2014, 07:31 PM	#14
805beemer Captain 23 Rep 647 Posts Drives: 2008 135i Join Date: Jul 2011 Location: Lompoc, CA iTrader: (4)	I'll take the cup holder. Also would be interested in the radio if you have logic 7 and the radio has the built in Bluetooth and USB.
	Appreciate 0 Quote

02-20-2014, 11:10 PM	#16
arcticcat522 Private First Class 4 Rep 160 Posts Drives: 135i Join Date: Apr 2012 Location: Calgary, Canada iTrader: (0)	ive never seen a charge pipe like that....im also interested in the cf trim pieces. I could prob. grab them one day if you are close. Adam
	Appreciate 0 Quote

02-21-2014, 12:06 AM	#18
silver07335i Captain 25 Rep 755 Posts Drives: 335i titanium silver metallic Join Date: May 2013 Location: CA iTrader: (5)	Cool project car. __________________ Car: 2007 e90 335i 6MT - sports, premium, cold weather, light, and smoker's package. Performance Mods: Cobb AP v3, ETS 7" FMIC, Injen DCI, Michelin PSS, CDV delete, rear spoiler, BMW PE w/ Magnaflow tips, PTF pro-tune, VRSF downpipes, ER chargepipe w/ Tial Q, APEX 18" EC-7 wheels, MP outlet/ inlet, MMP Stg. 3 turbos. Other mods: BMW cargo liner, 20% window tint, BMW alarm system, Weathertech floorliner, Lux E90 V6 bulbs, Philips X-treme Vision H7 bulbs, Blackvue DR650GW-2CH.
	Appreciate 0 Quote