[outie]

Originally Posted by spera23

Tried out exactly what you said. Works perfectly. Not only did it take the LED's off when the parking lights are on, but also when the regular auto headlights are on.

Thanks so much, I really appreciate your help!

Awesome! Thanks for reporting back.

[xxxjecxxx]

Originally Posted by Pseudo Nim

I have - but only works when the car is on. bit useless, really, but fun.

I agree, somewhat useless. It's come in handy twice. Driving to miami with sunroof open it started pouring out of nowhere, I turned on the wipers and the sunroof closed. My passenger was impressed

[spera23]

Originally Posted by spazticrecords

Anyone coded this?

Rain Close FZD REGENSCLIESSENTILT

I tried coding this, and took water and poured over rain sensor but it didn't work. Want to see if worked for anyone else.

Tried it. Worked on my 07 e92 as well as my 06 e65

[onebadmofo]

You need to have auto wipers on right? Doesn't work without it?

[spera23]

Originally Posted by onebadmofo

You need to have auto wipers on right? Doesn't work without it?

As far as i know, the wipers must be on auto, yes.

[E90PAT]

nice first post update xxxjecxxx

[spazticrecords]

For the sunroof close, do you have to re-init or reset it. I enabled it and then put car on with auto wipers and poured water on sensor but it didnt' close. Also there was another value without the world tilt? Anyone see that or know what value that means?

[Pseudo Nim]

Originally Posted by spazticrecords

For the sunroof close, do you have to re-init or reset it. I enabled it and then put car on with auto wipers and poured water on sensor but it didnt' close. Also there was another value without the world tilt? Anyone see that or know what value that means?

One is to close the sunroof from tilt, one is to close it from full open. You probably need to shut off the car for the coding to "take".

[onebadmofo]

Hey guys, regarding the spreadsheet. Can we have 3 options for the "tested" fields? Unknown, good and bad. Right now it's either yes or no.

I'll work on the sheet right now to see what can I do.

PS - disabled last night a "feature" that stops the windows from rolling up if you open the door in progress. Best fucking thing ever.

[330xiChic]

77 pages???? Holy buckets.....

I've tried searching through this thread looking for the coding process I'll need when I remove my Adaptive Headlights for non-adaptive one. Anyone know if that's been covered in here and if not, what the coding process is?

[Pseudo Nim]

Originally Posted by 330xiChic

77 pages???? Holy buckets.....

I've tried searching through this thread looking for the coding process I'll need when I remove my Adaptive Headlights for non-adaptive one. Anyone know if that's been covered in here and if not, what the coding process is?

Well, I think someone JUST covered it like one page back (how to go from non-adaptive to adaptive). So scroll back a page or four (depending on your # of posts per page).

[DESI4life10]

Originally Posted by 330xiChic

77 pages???? Holy buckets.....

I've tried searching through this thread looking for the coding process I'll need when I remove my Adaptive Headlights for non-adaptive one. Anyone know if that's been covered in here and if not, what the coding process is?

I think you can just remove the VO option from the list (adaptive headlights) and it should do the trick (haven't tried it).
See my post #1666.

If not, you can probably also manually disable the adaptive headlight lines in the specific module.

[spera23]

Anyone been able to successfully code/disable the TPMS for those who have aftermarket wheels without sensors?

Is it just a matter of removing the VO and the Fuse?

[outie]

Originally Posted by spera23

Anyone been able to successfully code/disable the TPMS for those who have aftermarket wheels without sensors?

Is it just a matter of removing the VO and the Fuse?

Remove 2VB from VO and remove fuse, and code DSC, CCC, and Kombi for the new VO.

[AW128i]

Originally Posted by outie

Remove 2VB from VO and remove fuse, and code DSC, CCC, and Kombi for the new VO.

I feel like this has already been covered, but maybe not. How did you know to also code the DSC, CCC, and Kombi for the new VO; i.e., how do you know which modules need to be recoded after changing the VO?

[carlosalbertogui]

halogen non lci to xenon LCI retrofif

the xenon the blinker the angel eyes working fine

as soon as i start the car the xenon starts to flickering and error on dash board

without motor running all ok
as soon as i start the car the xenon starts flickering


can anyone help please

[outie]

Originally Posted by AW128i

I feel like this has already been covered, but maybe not. How did you know to also code the DSC, CCC, and Kombi for the new VO; i.e., how do you know which modules need to be recoded after changing the VO?

Actually the CAS needs to be coded too with FA_write for the new VO. The rest is just logic (they all have references to TPMS).

[AW128i]

Originally Posted by outie

Actually the CAS needs to be coded too with FA_write for the new VO. The rest is just logic (they all have references to TPMS).

Gotcha

[BlaSTiWi]

Also do we do the the same FA_write process to LMA?

Tkx!

--RR.

Originally Posted by outie

Actually the CAS needs to be coded too with FA_write for the new VO. The rest is just logic (they all have references to TPMS).

[outie]

Originally Posted by BlaSTiWi

Also do we do the the same FA_write process to LMA?

Tkx!

--RR.

Yes I think for E9x the VO is stored in CAS and FRM (LMA?). For the other modules I mentioned above I don't think you can FA_write to them but you just need to read/re-write them in expertmode profile so they know the new VO.

[onebadmofo]

So guys, was anyone able to completely disable brake light check on older (<09) cars? I installed LCI tail and figured out the blinkers but still get errors for brake lights even though warm, cold checks and warnings are disabled. I played with every single "BL" value in the FRM module up to the point where I completely disabled brake lights but that didn't resolve the warnings on iDrive.
Now since Autologic dealers and few vendors on here are able to "code" LCI tails I think I'm missing something and need a friendly kick in the right direction. Any advise?

[outie]

Originally Posted by onebadmofo

So guys, was anyone able to completely disable brake light check on older (<09) cars? I installed LCI tail and figured out the blinkers but still get errors for brake lights even though warm, cold checks and warnings are disabled. I played with every single "BL" value in the FRM module up to the point where I completely disabled brake lights but that didn't resolve the warnings on iDrive.
Now since Autologic dealers and few vendors on here are able to "code" LCI tails I think I'm missing something and need a friendly kick in the right direction. Any advise?

I know you mentioned you have played with every single BL value, can you confirm that you tried changing this?

CC_MELD_BFD_BL
nicht_aktiv

I cannot confirm it works. I just saw this on another site.