[vmiro]

Originally Posted by makkan00

Pay somebody to do it for you bud. None of this worked for me!

I'll probably do that.

You said you did it for some other members??

[makkan00]

Originally Posted by vmiro

I'll probably do that.

You said you did it for some other members??

Send me a nice offer and I will sort it out.

[Chriz123]

Hi mates,

i fitted cruise control on my 330D 2006, changed the VO, coded KOMBI and DSC.
My Cruise control is working fine but i got no indication on my cluster...
TEMPOMAT_SETZ_ANZ_DAUER ist set to wert_02 in KOMBI

Does any one know a solution... It is an low cluster

[ka_rai]

hi friends

i listen to retrofit cruise controle, you must buy tempomat from 330D not from 320D if you want install it on 330D. is exact or false ?

thank you

[dabhand]

Originally Posted by makkan00

Hi

I have tried to add cruise control on E90.
Hardware, no problem and CC stalk installed.

After hardware installation I had DCS error with wheel came on OBC and with inpa two codes were read:
5E3F E0
5E5O E0

I have already added cruise control VO and coded the CAS, FRM and kombi with that.

Now as people say, we should reset steering sensor so;

In Tool32, I have choosen DCS_87.prg ---> lenkwinkel_dsc_abgleichen and it worked however DCS light and error is still there.

I read the code with inpa and following is the code under DSC. (1 code remaining)


E R R O R M E M O R Y
---------------------------------------
Date: 22.07.2012 15:11:24
ECU: DSC_87
JobStatus: OKAY
Variant: DSC_87
-------------------------------------------------------------
RESULT: 1 error in error memory !
-------------------------------------------------------------
5E3F 5E3F - F-CAN SZL Codierfehler.
Error counter: 9
Logistic counter: 40
Fahrzeuggeschwindigkeit 0.00 km/h
Bremslichtschalter 0.00 0/1
Bremsfluessigkeitsschalter 0.00 0/1
ASC/DSC_aktiv (Tasterfunktion) 1.00 0/1
Bremsdruck erkannt 0.00 0/1
ABS-Regelung 0.00 0/1
ASC-Regelung (BMR) 0.00 0/1
ASC-Regelung (AMR) 0.00 0/1
GMR-Regelung (GMR) 0.00 0/1
GMR-Regelung (MMR) 0.00 0/1
CBC-Regelung 0.00 0/1
MSR-Regelung 0.00 0/1
TDR-Regelung 0.00 0/1
SDR-Regelung 0.00 0/1
DBC-Regelung 0.00 0/1
RTA aktiv 1.00 0/1
Run-Up Mode 0.00 0/1
kein passendes Fehlersymptom.
Testbedingungen erfüllt
Fehler momentan vorhanden und bereits gespeichert
Fehler würde das Aufleuchten einer Warnlampe verursachen
Error code: 5E 3F E0 09 28 FF FF 00 0A 00 04
================================================== ===========


I have also tyre pressue monitoring alert on OBC, which does not go away even after resetting.

Can somebody help how to get rid or it.

Shall I update DSC module?
Any other suggestion?

Thanks.

I'm having the exact same problem / errors - did you get it sorted out?

I've been googling - the two answers I have found are -

the steering angle sensor needs calibrating

and

the switch has the wrong vin programmed

[Taruno]

Originally Posted by vmiro

I really tried everything, from changing the VIN on DSC ECU with tool32, experimenting with various options in tool32...to flashing DSC ECU with new software using WinKFP...
The problem is obviously different serial number of the SZL, than the one DSC expecting to see.

makkan00 if you are willing to help me I'll be very grateful

You need to reset the SZL with Tool32 I had that error too after the reset it worked TO RESET it you need to select E87 not E89 and it will do the trick, make sure the tires and the wheel are straight otherwise it will throw an error after driving off.

Unlike the 7 series switch on E90 the VIN rewrites itself with calibration.

[pxinrorh]

http://www.e90post.com/forums/showthread.php?t=1165099

[Ali-E90]

Hey guys, appreciate a little expertise here.

I have a 2007 323i, with no cruise at all. I have rain sensing wipers, but halogen non-adaptive headlights.

I'd like to retrofit ANY cruise control, no need for active / dynamic etc.

I found a steering wheel column with the right switches, but it came from a 2009 335 with option S544 (CC with braking). It has rain sensing wipers, but also adaptive xenon headlights (not sure if that's relevant).

Can someone confirm that the column with switches, and some coding, is all that I'll need to get basic CC? Is that option S540? Anything else I need to be aware of?

thank you!!!! Really appreciate all the posts already.

Would love a response sooner than later (want to secure that column), but of course any response is appreciated.

[dstrickland]

Originally Posted by Ali-323i

Hey guys, appreciate a little expertise here.

I have a 2007 323i, with no cruise at all. I have rain sensing wipers, but halogen non-adaptive headlights.

I'd like to retrofit ANY cruise control, no need for active / dynamic etc.

I found a steering wheel column with the right switches, but it came from a 2009 335 with option S544 (CC with braking). It has rain sensing wipers, but also adaptive xenon headlights (not sure if that's relevant).

Can someone confirm that the column with switches, and some coding, is all that I'll need to get basic CC? Is that option S540? Anything else I need to be aware of?

thank you!!!! Really appreciate all the posts already.

Would love a response sooner than later (want to secure that column), but of course any response is appreciated.

Send the part number of the column your looking into. It should work with proper coding.

[shady_rulls]

Hello everybody,

I have little problem with my cc retrofit. I have put the new szl, added the $540 in Vo on CAS and FRM, calibrate the sensor. I have no errors or light on, but when I read the car with INPA I get this codes



9519 9519 -
windscreen wiper switch (SWS) not plausible- incorrect combination in windscreen wiper switch

No matching error symptom.
Test conditions fulfilled
Error present now and already stored
Error would not cause a warning lamp to light up
Error code: 95 19 60 02 28 4B 08 00 08 00 04

---------------------------------------------------------------------------------------------------------
9511 9511 -
FGR/ACC-steering column lever (LST) not plausible - incorrect combination with cruise cont


No matching error symptom.
Test conditions fulfilled
Error present now and already stored
Error would not cause a warning lamp to light up
Error code: 95 11 60 02 28 4B 08 00 08 00 04

Also the blinkers go by pushing the hazard button, I can get the wipers to cycle once by pushing the auto button (on the wiper stalk, plus the green led lights up) and all other movements do nothing. The check button on the indicator stalk works, as does the settings flipper.

Sorry for the long post. Does anyone had this problem?

Thank you

[ptpending]

you need to code dsc, kombi and, maybe, reset adaptation of the engine control unit

[shady_rulls]

Hi ptpending,
I coded the entire car. So those modules to. What do you mean by reset adaptation of the engine control unit?

[Dtype]

Originally Posted by shady_rulls

Hi ptpending,
I coded the entire car. So those modules to. What do you mean by reset adaptation of the engine control unit?

Need another szl. That one is not compatible.

[shady_rulls]

Could it be from a L6? Because mine is a 320d L4, from 2005