|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
Faulty Restraint System
|
|
08-25-2013, 04:41 PM | #1 |
New Member
1
Rep 20
Posts |
Faulty Restraint System
Have a wee issue which I hope someone can help out with, tonight I swapped out my basic subs for MB quartz ones under the seat, during the process I disconnected the wiring to the seat, moved seats out of the way fitted the new subs no problem. Before refitting the seats thought I would try out the stereo to make sure all was working.
When I switched on ignition the dash lit up with 'Faulty Restraint System' which I put down to the seats not being connected. Everything worked fine with the speakers, fitted seats again. When I switched back on ignition the warnings are still there....... Checked all the plugs again all connected properly, no other wiring has been touched. Anyone know if this fault is now stored and needs clearing? I ordered a scanner program from fleebay and guess what it doesn't work (shouldn't be a cheapskate). Does anyone know of any decent software that can clear fault codes on an E90? Thanks Martin |
08-25-2013, 05:36 PM | #2 |
New Member
0
Rep 18
Posts |
Bear, you have unwittingly committed the cardinal sin when working with the airbag system! Lol
You shouldn't apply power with them disconnected. Luckily, all you need is someone to reset the light :-) |
Appreciate
0
|
08-25-2013, 05:50 PM | #3 |
New Member
1
Rep 20
Posts |
I am a bad man.....I will stand in the corner and give myself a serious talking to!!!! At least I know what not to do again!!!!
|
Appreciate
0
|
09-15-2013, 06:50 PM | #6 |
New Member
1
Rep 20
Posts |
All sorry not been on for a while, work...its a bugger. Got myself sorted with DIS cleared the fault and we are all go again. Also just finished retro fitting my folding mirrors and coding them. Half done the ICE install but need to get that finished quickly :-)
|
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|