BMW CODING success

BeWide · 02-16-2011, 09:41 AM

Quote:

Originally Posted by Wissam

That error seems to pop up only when you try to code the main CAS module directly, especially if your car is manual transmission...stick to coding only the sub-modules per the procedure in the DIY and you should be ok...

Thanks !

xxxjecxxx · 02-16-2011, 09:46 AM

Quote:

Originally Posted by spazticrecords

That's really nice. So that means even if the "backup" got screwed up this, you can always revert back to stock if you "mess" something up or code it wrong.?

yes.

onebadmofo · 02-16-2011, 10:04 AM

Well I got sick of not being able to code my FRM for some reason so I downloaded 45.9GB worth of Progman/ISTA files. Hope that will work

Alex@Helix · 02-16-2011, 01:19 PM

Quote:

Originally Posted by xxxjecxxx

don't remember the value off the top of my head but yes. It's in the same module as the seatbelt.

ooo.. is it?! was it said back in the middle of the 50+ Pages? I have read through so many of them but I can never keep track of what pages I have read and where I stopped.

Alex@Helix · 02-16-2011, 01:20 PM

Quote:

Originally Posted by xxxjecxxx

If you screw anything up. To reset your car to it's ORIGINAL state, open your .MAN file erase everything out of it and save it. Then use the process car/ code car option. Since there is nothing to code, all values are defaulted the only exception is key memory which will stay the same. Works flawlessly.

For example everyone with the gear and exclamation point, this will get rid of it.

ur welcome!

davidmbell · 02-16-2011, 05:57 PM

Quote:

Originally Posted by kaigoss69

I want my car recoded but I am too chicken to try myself. Anyone out there who wants to help me for a fee? I am in upstate South Carolina but I frequently travel to Atlanta, Birmingham, Jacksonville.

The main thing I want done is Hifi out on the radio, folding mirrors with keyfob, digital speedometer. This is an 08 335i.

Ditto, but I'm in the UK with a 2009 e89 Z4 35i. Really only want those options too. And the ability to reverse them, or add them again should dealer wipe them.

xxxjecxxx · 02-16-2011, 07:03 PM

Quote:

Originally Posted by Alex@Helix

ooo.. is it?! was it said back in the middle of the 50+ Pages? I have read through so many of them but I can never keep track of what pages I have read and where I stopped.

Don't think anyone has talked about it before. It's in the ABG module. If i'm not mistaken the value contains the word airbag.

Losco · 02-16-2011, 11:39 PM

I'm thinking of enabling DRL on my F10, will this method works with F series cars?

update: I read some of the earlier pages and found Phil said something about disconnecting pin 8 of the OBD2 connector to make it work on Ethernet enabled cars(F series cars). is phil also the vender selling this cable?

http://cgi.ebay.com/ebaymotors/ws/eB...TRK:MEBOFFX:IT

onebadmofo · 02-17-2011, 08:23 AM

Quote:

Originally Posted by brinx38

I coded the following...

cold rear turn signal... KALTUEBERWACHUNG_BLK_H
cold brake light..... KALTUEBERWACHUNG_BL
warm rear turn signal... WARMUEBERWACHUNG_BLK_H
warm brake light.. WARMUEBERWACHUNG_BL

brake lamp error check (done & undone... doesn't seem to make a difference )
FEHLERMELDUNG_CC_BL_L
FEHLERMELDUNG_CC_BL_R

Lights work perfectly

but I still haven't figured out how to remove the Brake light error on the iDrive... There is no error reported for the turn signals..

maybe someone else can chime in ??

Coded that in last night and it worked perfectly except that I just like you still have errors for the brake lights. But so much better now to have 100% functioning blinkers!

Still trying to get the SSS going.

spazticrecords · 02-17-2011, 12:37 PM

I can't belive the DVD in motion has still not been defeated. I have contacted 3 different groups who claim they can do it and they all want $2000 for the answer. There has to be an easier way. Does anyone have this enabled or coded by someone? It seems there all doing it without enabling the speed lock menu.

NiVeDh · 02-17-2011, 01:16 PM

Quote:

Originally Posted by spazticrecords

I can't belive the DVD in motion has still not been defeated. I have contacted 3 different groups who claim they can do it and they all want $2000 for the answer. There has to be an easier way. Does anyone have this enabled or coded by someone? It seems there all doing it without enabling the speed lock menu.

I and two others have offered $200 each so far (for a total of $600) and I know you mentioned you'd put some money in as well so if we can get a collective fund going, then we could just pay one of them.

BabyBlack · 02-17-2011, 02:32 PM

Quote:

Originally Posted by spazticrecords

I can't belive the DVD in motion has still not been defeated. I have contacted 3 different groups who claim they can do it and they all want $2000 for the answer. There has to be an easier way. Does anyone have this enabled or coded by someone? It seems there all doing it without enabling the speed lock menu.

I see these under the .trc "VIDEO_DENY_C0B=deny_slow_key" and "VIDEO_DENY=deny_slow_key" when it reads all the module, but they were not showing when I read under the CIC

spazticrecords · 02-17-2011, 03:40 PM

I will put $200 into the fund as well. That's a total of $800. Please let us know if you want to donate into this so we can fix this once and for all. I think it's crazy it's such a big deal but I'm tired of these "vendors" charging outrageous prices for this feature

spazticrecords · 02-17-2011, 06:01 PM

I just got a new laptop and installed everything. I tried coding this in the CIC

SPEEDLOCK_X_KMH_MAX
nicht_aktiv
SPEEDLOCK_X_KMH_MIN
nicht_aktiv

and when coded got an error but I was able to coder other values. Maybe these are releated to the DVD in motion. Can anyone else test or try to code this. I need to try my old laptop to see if that works. What driver are you guys using for Win7 and the settings. I used to use XP but my new lappy is Win7 x32.

The_DDub · 02-17-2011, 06:58 PM

Got my coding done. Doors unlock when the keyfob is removed from the slot, windows rollup with keyfob.

Next is mirror fold-in with fob and remove idrive disclaimer.

NiVeDh · 02-17-2011, 07:09 PM

Quote:

Originally Posted by spazticrecords

I just got a new laptop and installed everything. I tried coding this in the CIC

SPEEDLOCK_X_KMH_MAX
nicht_aktiv
SPEEDLOCK_X_KMH_MIN
nicht_aktiv

and when coded got an error but I was able to coder other values. Maybe these are releated to the DVD in motion. Can anyone else test or try to code this. I need to try my old laptop to see if that works. What driver are you guys using for Win7 and the settings. I used to use XP but my new lappy is Win7 x32.

Tried those, no luck. I'm running Win7 x64 but using Virtual PC to run XP for coding to keep it separate from all my other files.

spazticrecords · 02-17-2011, 07:15 PM

@Niv, you weren't able to code those values or no luck that it worked with DVD in motion? from changing those values? What driver are you using?

NiVeDh · 02-17-2011, 07:25 PM

Quote:

Originally Posted by spazticrecords

@Niv, you weren't able to code those values or no luck that it worked with DVD in motion? from changing those values? What driver are you using?

No luck getting the coding to "stick" if you will. By the time the CIC turns off and turns back on after writing, the coding has already reverted back.

I'm just using FTDI drivers I think.

xxxjecxxx · 02-17-2011, 07:33 PM

Quote:

Originally Posted by BabyBlack

I see these under the .trc "VIDEO_DENY_C0B=deny_slow_key" and "VIDEO_DENY=deny_slow_key" when it reads all the module, but they were not showing when I read under the CIC

try using the "code car" option.

xxxjecxxx · 02-17-2011, 07:33 PM

If I had a car with NAV I would have figured this out by now -_____-

spazticrecords · 02-17-2011, 07:34 PM

Quote:

Originally Posted by NiVeDh

No luck getting the coding to "stick" if you will. By the time the CIC turns off and turns back on after writing, the coding has already reverted back.

I'm just using FTDI drivers I think.

Does it let you change those speed values? When I try to code it, it throws and error and doesn't write to the car but I can code other options in the CIC, it's just 2 values don't work.

outie · 02-17-2011, 08:07 PM

Quote:

Originally Posted by spazticrecords

Does it let you change those speed values? When I try to code it, it throws and error and doesn't write to the car but I can code other options in the CIC, it's just 2 values don't work.

On my 2011 CIC the two parameters are different -

SPEEDLOCK_X_KMH_MAX_C0E
nicht_aktiv
SPEEDLOCK_X_KMH_MIN_C0E
nicht_aktiv

I just changed them to 3_kmh as allowed by using NCSdummy. I re-read the car and the values still stick. I haven't tried driving the car though.

02-16-2011, 10:04 AM	#1433
onebadmofo Colonel 346 Rep 2,396 Posts Drives: 2008 E90 M3 Join Date: Aug 2010 Location: Central NJ iTrader: (14)	Well I got sick of not being able to code my FRM for some reason so I downloaded 45.9GB worth of Progman/ISTA files. Hope that will work
	Appreciate 0 Quote

02-16-2011, 11:39 PM	#1438
Losco Second Lieutenant 14 Rep 231 Posts Drives: F10 528i M-sport Join Date: Aug 2008 Location: Japan iTrader: (0)	I'm thinking of enabling DRL on my F10, will this method works with F series cars? update: I read some of the earlier pages and found Phil said something about disconnecting pin 8 of the OBD2 connector to make it work on Ethernet enabled cars(F series cars). is phil also the vender selling this cable? http://cgi.ebay.com/ebaymotors/ws/eB...TRK:MEBOFFX:IT Last edited by Losco; 02-16-2011 at 11:51 PM..
	Appreciate 0 Quote

02-17-2011, 12:37 PM	#1440
spazticrecords Banned 1 Rep 123 Posts Drives: 2010 E90 328 XI Join Date: Jun 2007 Location: Yorktown Heights, NY. iTrader: (0)	I can't belive the DVD in motion has still not been defeated. I have contacted 3 different groups who claim they can do it and they all want $2000 for the answer. There has to be an easier way. Does anyone have this enabled or coded by someone? It seems there all doing it without enabling the speed lock menu.
	Appreciate 0 Quote

02-17-2011, 03:40 PM	#1443
spazticrecords Banned 1 Rep 123 Posts Drives: 2010 E90 328 XI Join Date: Jun 2007 Location: Yorktown Heights, NY. iTrader: (0)	I will put $200 into the fund as well. That's a total of $800. Please let us know if you want to donate into this so we can fix this once and for all. I think it's crazy it's such a big deal but I'm tired of these "vendors" charging outrageous prices for this feature
	Appreciate 0 Quote

02-17-2011, 06:01 PM	#1444
spazticrecords Banned 1 Rep 123 Posts Drives: 2010 E90 328 XI Join Date: Jun 2007 Location: Yorktown Heights, NY. iTrader: (0)	I just got a new laptop and installed everything. I tried coding this in the CIC SPEEDLOCK_X_KMH_MAX nicht_aktiv SPEEDLOCK_X_KMH_MIN nicht_aktiv and when coded got an error but I was able to coder other values. Maybe these are releated to the DVD in motion. Can anyone else test or try to code this. I need to try my old laptop to see if that works. What driver are you guys using for Win7 and the settings. I used to use XP but my new lappy is Win7 x32.
	Appreciate 0 Quote

02-17-2011, 06:58 PM	#1445
The_DDub Mmmm torque 19 Rep 318 Posts Drives: Like a Boss, hard and fast Join Date: Jun 2010 Location: Livermore, CA iTrader: (5) Garage List 2007 328i Sedan [0.00]	Got my coding done. Doors unlock when the keyfob is removed from the slot, windows rollup with keyfob. Next is mirror fold-in with fob and remove idrive disclaimer. __________________ Monaco Blue E90 328i with Nav, Sport, Premium and Comfort Access packages, 6FL with iPod cable SAE spec Depo with HIDs and HID fogs Depo AE replacement Album
	Appreciate 0 Quote

02-17-2011, 07:15 PM	#1447
spazticrecords Banned 1 Rep 123 Posts Drives: 2010 E90 328 XI Join Date: Jun 2007 Location: Yorktown Heights, NY. iTrader: (0)	@Niv, you weren't able to code those values or no luck that it worked with DVD in motion? from changing those values? What driver are you using?
	Appreciate 0 Quote

02-17-2011, 07:33 PM	#1450
xxxjecxxx Banned 247 Rep 966 Posts Drives: F30 335i M sport Join Date: Aug 2009 Location: Orlando, FL iTrader: (1) Garage List 2013 BMW 335i [0.00] 2006 BMW 325i [0.00]	If I had a car with NAV I would have figured this out by now -_____-
	Appreciate 0 Quote