[big_c]

Background info: V51.2 datens, latest NCS expert and INPA. 06/07 Production date 335i, Windows XP laptop , everything set up with com1 and 1 latency.



So Im trying to recode an adaptive headlight module to my car to replace a shorted one. I cannot for the life of me get the coding to take. Every time I get the following errors:

I can read the VIN, ECU's, everything fine. I click execute job and it goes to coding active, then just errors out with coding is faulty. Ive tried two different cables. Two different laptops. Same results on other modules as well. Tried various profiles.

If anyone can please help me get this module coded I would be GREATLY appreciative


[20:29:57.468] [2014-02-06] [SERIE] 2020 PABD/CABD A_SMCKWR.IPS CodIndex2Lesen 495
[20:29:57.468] [2014-02-06] [SERIE] ECU does not answer FRM_87, ID_SMC_LESEN: ERROR_ECU_BUSY_REPEAT_REQUEST

[20:29:57.562] [2014-02-06] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6
[20:29:57.562] [2014-02-06] [SERIE] ECU does not answer CODIERINDEX_LESEN

================================================== ==============================(2)
[20:30:29.812] [2014-02-06] [SERIE] 2020 PABD/CABD A_SMCKWR.IPS CodIndex2Lesen 495
[20:30:29.812] [2014-02-06] [SERIE] ECU does not answer FRM_87, ID_SMC_LESEN: ERROR_ECU_BUSY_REPEAT_REQUEST

[20:30:29.921] [2014-02-06] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6
[20:30:29.921] [2014-02-06] [SERIE] ECU does not answer CODIERDATEN_LESEN