2step/nls help

Pilo704 · 01-18-2012, 07:46 PM

I cant seem to get my 2 step/nls to work on my procede rev 3. I'm positive it's wired correctly can someone help me with a diagram or a written explanation of where each wire plugs into the relay. I think somehow its it's just plugged in the wrong terminals. No problem enabling in the user software, also important to note I am running the aggressive maps

OpenFlash · 01-18-2012, 07:59 PM

Quote:

Originally Posted by Pilo704

I cant seem to get my 2 step/nls to work on my procede rev 3. I'm positive it's wired correctly can someone help me with a diagram or a written explanation of where each wire plugs into the relay. I think somehow its it's just plugged in the wrong terminals. No problem enabling in the user software, also important to note I am running the aggressive maps

I'll be happy to help. But did you read this: http://www.procedetuning.com/BMW/n54...NLS/index.html

Pilo704 · 01-18-2012, 08:45 PM

Yes sir, that is how I figured out how to wire in the new segment of the harness. I have power to the procede would this be possible if it were plugged in wrong? I think im in the wrong terminals.

Pilo704 · 01-24-2012, 06:18 PM

Thank you shiv, figured it out, I had the red wire that goes to the procede plugged into terminal 87 instead of 85. To anyone doing the install when properly connected terminal 87 will be left blank.

TheStig · 01-26-2012, 01:25 PM

Post some videos!!

01-18-2012, 07:46 PM	#1
Pilo704 Private 6 Rep 96 Posts Drives: 335i Join Date: Feb 2011 Location: New Jersey iTrader: (3)	2step/nls help I cant seem to get my 2 step/nls to work on my procede rev 3. I'm positive it's wired correctly can someone help me with a diagram or a written explanation of where each wire plugs into the relay. I think somehow its it's just plugged in the wrong terminals. No problem enabling in the user software, also important to note I am running the aggressive maps __________________ Proceed v5 rev.3, Injen dci, Evolution Racewerks charge pipe/TiAl Bov, Evolution Racewerks FMIC/ meth elbow, AR design downpipes, Riss Racing midpipes, Remus race exhaust, Evolution Racewerks carbon engine cover.
	Appreciate 0 Tweet Quote

01-18-2012, 08:45 PM	#3
Pilo704 Private 6 Rep 96 Posts Drives: 335i Join Date: Feb 2011 Location: New Jersey iTrader: (3)	Yes sir, that is how I figured out how to wire in the new segment of the harness. I have power to the procede would this be possible if it were plugged in wrong? I think im in the wrong terminals. __________________ Proceed v5 rev.3, Injen dci, Evolution Racewerks charge pipe/TiAl Bov, Evolution Racewerks FMIC/ meth elbow, AR design downpipes, Riss Racing midpipes, Remus race exhaust, Evolution Racewerks carbon engine cover.
	Appreciate 0 Quote

01-24-2012, 06:18 PM	#4
Pilo704 Private 6 Rep 96 Posts Drives: 335i Join Date: Feb 2011 Location: New Jersey iTrader: (3)	Thank you shiv, figured it out, I had the red wire that goes to the procede plugged into terminal 87 instead of 85. To anyone doing the install when properly connected terminal 87 will be left blank. __________________ Proceed v5 rev.3, Injen dci, Evolution Racewerks charge pipe/TiAl Bov, Evolution Racewerks FMIC/ meth elbow, AR design downpipes, Riss Racing midpipes, Remus race exhaust, Evolution Racewerks carbon engine cover.
	Appreciate 0 Quote

01-26-2012, 01:25 PM	#5
TheStig Captain 52 Rep 794 Posts Drives: Alot of everything. Join Date: Jan 2011 Location: Potomac MD iTrader: (4)	Post some videos!! __________________ Gone But Not forgotten: -07 Shelby GT500 W/ Full Bolt on E85 -08 335i 6MT W/ Full Bolt On E85/Meth -08 M3 DCT W/ Full Exhaust / Tune -13 B8 Audi S4 APR Stage 2+
	Appreciate 0 Quote