Vishnu New Firmware and Maps

lawdude · 07-03-2009, 05:03 PM

http://216.120.252.228/forum/showthread.php?t=990

All I need is a PROcede.

OpenFlash · 07-03-2009, 05:08 PM

Hold up guys... still in the process of writing/linking/etc,. everything. The new software isn't downloadable yet. If you hit the link, you will get the old software. Give me a few hours before downloading anything. I'll update this thread when it's all ready. LOTS of new stuff

Shiv

OpenFlash · 07-03-2009, 05:54 PM

Ok... software is available for download. As are new maps and firmware. I am not done with documentation yet. Still need to write up a document on custom tuning with the new CANbus logging. I should have this ready to go by Monday or Tuesday. But if you guys want to update firmware and maps right now, go ahead. You will benefit from the engine temp based warm-up and overtemp protection at the very least.

Shiv

jpsimon · 07-03-2009, 05:57 PM

Yesss I've been impatienly waiting for this for a while now!! Gonna fine tune things then get back to the dyno asap

weeeza · 07-03-2009, 08:16 PM

Shiv,

are those doomsday or not

OpenFlash · 07-03-2009, 08:59 PM

Quote:

Originally Posted by weeeza

Shiv,

are those doomsday or not

They are CANbus maps intended for Rev.2 CANbus hardware. So we expect the user to clear any tuner manipulation code with the code reading/clearing feature before removal and dealership visit.

Shiv

weeeza · 07-03-2009, 09:26 PM

Quote:

Originally Posted by shiv@vishnu

They are CANbus maps intended for Rev.2 CANbus hardware. So we expect the user to clear any tuner manipulation code with the code reading/clearing feature before removal and dealership visit.

Shiv

I understand that, but the last maps you released last month, you said that they were only for non-doomsday and a few days ago you said you will release the doomsday soon after you come back from new jersey, I was wondering if these were it? I have the canbus rev2 but I did not download the latest stuff cause they were non-doomsday only, I'm talking about the maps that reach boost faster like you said... I can't wait for the doomsday version of those

Grendalf · 07-03-2009, 09:29 PM

Hi Shiv,
could you tell me if the default UT setting of 70% for stage 1 is correct for the maps? The 5-29 maps were using 75% .

Thank you!

rismo · 07-03-2009, 09:29 PM

Nice that you have implemented the temp features... will definitly give it a try tommorow.

Are these features v2 specific?

Sparky66 · 07-03-2009, 10:12 PM

Quote:

Originally Posted by weeeza

I understand that, but the last maps you released last month, you said that they were only for non-doomsday and a few days ago you said you will release the doomsday soon after you come back from new jersey, I was wondering if these were it? I have the canbus rev2 but I did not download the latest stuff cause they were non-doomsday only, I'm talking about the maps that reach boost faster like you said... I can't wait for the doomsday version of those

The whole point of upgrading to the Canbus Rev.II is so you can clear any relevant codes present if triggered by running the non-doomsday style of maps. So in essence, running a Canbus setup negates the need of providing Doomsday maps. Doomsday maps are only for the guys running Rev.I or Rev.II without Canbus who can't readily clear these codes..........or get the Bavarian Technic Tool.

weeeza · 07-03-2009, 10:24 PM

Quote:

Originally Posted by Sparky66

The whole point of upgrading to the Canbus Rev.II is so you can clear any relevant codes present if triggered by running the non-doomsday style of maps. So in essence, running a Canbus setup negates the need of providing Doomsday maps. Doomsday maps are only for the guys running Rev.I or Rev.II without Canbus who can't readily clear these codes..........or get the Bavarian Technic Tool.

I get that, but if that's the case why were the maps released last Month specifically say non-doomsday???

Sparky66 · 07-03-2009, 11:05 PM

I think Shiv was making it apparent and as a warning for Non-Canbus users that using these "non-Doomsday" maps would trigger a manipulation code that would be readily seen by your BMW Service dealer.

cn555ic · 07-03-2009, 11:20 PM

If you don't have canbus Procede and want to run the non-doomsday maps, the other alternative is get the BT tool.

vase330 · 07-03-2009, 11:25 PM

Quote:

Originally Posted by lawdude

http://216.120.252.228/forum/showthread.php?t=990

All I need is a PROcede.

The date on there reads 03-31-2009, 12:03 PM Hmmm, why not fix that as its missleading as heck. Bad user interface. Happy 4th guys.

FotiosF90M5 · 07-04-2009, 12:08 AM

I had my software upgraded from very pre 29.2 to the latest ISTA software and have tried my best to get a tuner manipulation code to show up and no dice. strange. just throwin that out there.

FotiosF90M5 · 07-04-2009, 12:08 AM

Shiv, is there any way possible to make the oil temp protection an option. My ride to work is short and I usually dont mind getting on it at around 140-150 degrees. I would rather have control of it myself.

vase330 · 07-04-2009, 12:37 AM

Fotios send me your Vin number so I know to avoid your car if I ever want a used 335i

TMR · 07-04-2009, 12:45 AM

did you look into resolving the wastegate rattle some of us get when lagfix is turned on?

FotiosF90M5 · 07-04-2009, 01:01 AM

Quote:

Originally Posted by vase330

Fotios send me your Vin number so I know to avoid your car if I ever want a used 335i

lol... its only like 30 degrees lower and I dont redline it or anything.

lawdude · 07-04-2009, 01:31 AM

Quote:

Wastegate Duty Cycle Limit
This parameters defines the maximum allowed duty cycle when running at maximum load. This can protect your turbos agains over-spooling in likelihood of a boost leak or running too high of a User Torque value in high altitude (or high temperature) conditions. For reference, a stock car, at sea level operates at 35-40%. A tuned car running at 14psi can routinely operate at 45-55%. It is our suggestion to avoid running over 60% if turbo longevity is a concern. As such, we suggest setting this value to 70% to prevent false triggering. When triggered, the PROcede will induce a valet mode that can be reset only by cycling the ignition OFF and ON. 30-100%

Will somebody please explain this. It sounds like he's saying to set it at 70% even though it shouldn't be any higher than 60%.

TheTwinz · 07-04-2009, 01:52 AM

Quote:

Originally Posted by lawdude

Will somebody please explain this. It sounds like he's saying to set it at 70% even though it shouldn't be any higher than 60%.

I think what it means is... if it is set at 70%, then your car will push itself up to 70% and if/when it ever goes above 70% (boosting higher than 14psi), it will go into valet mode.

I guess the extra 10% from the recommended 60% is just some head space for those boost spikes and stuff that occur when shifting or letting off the throttle. You woudln't want it to go into valet everytime u shift or drive right?

daixloxbmw · 07-04-2009, 07:52 AM

are we to assume that vishnu is no longer supporting the non-canbus rev1 V3 units anymore? seems like all the new maps/firmware are geared towards the canbus rev2 V3 units.

07-03-2009, 05:03 PM	#1
lawdude Colonel 93 Rep 2,339 Posts Drives: 335i ZPP ZSP TiAg MT Join Date: Jul 2006 Location: Georgia iTrader: (1)	Vishnu New Firmware and Maps http://216.120.252.228/forum/showthread.php?t=990 All I need is a PROcede. __________________ What do I know? I'm insane.
	Appreciate 0 Tweet Quote

07-03-2009, 05:08 PM	#2
OpenFlash 1736 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	Hold up guys... still in the process of writing/linking/etc,. everything. The new software isn't downloadable yet. If you hit the link, you will get the old software. Give me a few hours before downloading anything. I'll update this thread when it's all ready. LOTS of new stuff Shiv Last edited by OpenFlash; 07-03-2009 at 05:28 PM..
	Appreciate 0 Quote

07-03-2009, 05:54 PM	#3
OpenFlash 1736 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	Ok... software is available for download. As are new maps and firmware. I am not done with documentation yet. Still need to write up a document on custom tuning with the new CANbus logging. I should have this ready to go by Monday or Tuesday. But if you guys want to update firmware and maps right now, go ahead. You will benefit from the engine temp based warm-up and overtemp protection at the very least. Shiv
	Appreciate 0 Quote

07-03-2009, 05:57 PM	#4
jpsimon Team Zissou 3064 Rep 10,197 Posts Drives: 2022 AWD M3 Comp - SMB Join Date: Dec 2006 Location: CT iTrader: (7)	Yesss I've been impatienly waiting for this for a while now!! Gonna fine tune things then get back to the dyno asap
	Appreciate 0 Quote

07-03-2009, 08:16 PM	#5
weeeza Private 4 Rep 71 Posts Drives: E93 335i Join Date: Mar 2009 Location: AZ iTrader: (0)	Shiv, are those doomsday or not
	Appreciate 0 Quote

07-03-2009, 09:29 PM	#8
Grendalf Private First Class 4 Rep 162 Posts Drives: BMW 335xi (E90 LCI) Join Date: Mar 2009 Location: Quebec, Canada iTrader: (0)	Hi Shiv, could you tell me if the default UT setting of 70% for stage 1 is correct for the maps? The 5-29 maps were using 75% . Thank you! __________________ 335xi Sedan — CANbus PROcede \| Injen Intake \| Forge DVs
	Appreciate 0 Quote

07-03-2009, 09:29 PM	#9
rismo Captain 75 Rep 911 Posts Drives: BMW E92 335 Join Date: Jul 2008 Location: Europe iTrader: (0)	Nice that you have implemented the temp features... will definitly give it a try tommorow. Are these features v2 specific? __________________ BMW 335 E92 09 - Full options - DKG - MHD by Buraq - RB Next Gen - RB Inlets/Outlet - Forge Diverter Valves - AR Catless DP - Afe Intake - Helix IC - FuelIT Stage 2 LPFP - Ar Oil Cooler - PPK Water Cooler - M3 Suspension - JRZ RS1 Shocks - Eibach Pro Springs - Drexler LSD - BMW IS Exhaust - Carbon Endurance Brake Pads - Stainless Steel Brake Lines - M101 Wheels - Michelin PS2 - M-Tech Body - M-Strutbar BMW M550i G30 2019 - BM3
	Appreciate 0 Quote

07-03-2009, 11:05 PM	#12
Sparky66 Major 58 Rep 1,230 Posts Drives: 335 E92 Coupe. Jet Black. Join Date: Feb 2007 Location: Sydney, Australia iTrader: (0)	I think Shiv was making it apparent and as a warning for Non-Canbus users that using these "non-Doomsday" maps would trigger a manipulation code that would be readily seen by your BMW Service dealer.
	Appreciate 0 Quote

07-03-2009, 11:20 PM	#13
cn555ic 441 Rep 18,331 Posts Drives: 335i Join Date: Jun 2007 Location: US iTrader: (6)	If you don't have canbus Procede and want to run the non-doomsday maps, the other alternative is get the BT tool.
	Appreciate 0 Quote

07-04-2009, 12:08 AM	#15
FotiosF90M5 ///M Specialist South Shore BMW 770 Rep 7,108 Posts Drives: 2021 M5 Comp BHG/Silverstone Join Date: Jan 2007 Location: South Shore, MA iTrader: (62)	I had my software upgraded from very pre 29.2 to the latest ISTA software and have tried my best to get a tuner manipulation code to show up and no dice. strange. just throwin that out there. __________________ 2021 M5 COMPETITION LCI Brands Hatch Gray on SIlverstone, carbon roof, comp wheels, Mperf splitter, carbon pro spoiler, carbon diffuser , carbon paddles, executive pkg. Dinan HAS, RaceChip, dinan spacers, FC stud kit, etc
	Appreciate 0 Quote

07-04-2009, 12:37 AM	#17
vase330 Colonel 102 Rep 2,760 Posts Drives: 19 E63S; 15.5 RangeRover ATB Join Date: Jan 2007 Location: Arlington, Va iTrader: (1)	Fotios send me your Vin number so I know to avoid your car if I ever want a used 335i __________________ E92 335 \| Space Gray \| Saddle Brown Dakota \| Dark Burl Trim \| ZPP \| ZSP \| AT \| Idrive \| 6FL \| FBO \| Dinan CAI \| Quaife LSD \| STG3 PROCede.
	Appreciate 0 Quote

07-04-2009, 12:45 AM	#18
TMR Brigadier General 394 Rep 3,161 Posts Drives: M3 Join Date: Jun 2008 Location: Torrance iTrader: (12)	did you look into resolving the wastegate rattle some of us get when lagfix is turned on?
	Appreciate 0 Quote

07-04-2009, 07:52 AM	#22
daixloxbmw Lieutenant 141 Rep 571 Posts Drives: Corvette Grand Sport Join Date: Mar 2007 Location: USA iTrader: (0)	are we to assume that vishnu is no longer supporting the non-canbus rev1 V3 units anymore? seems like all the new maps/firmware are geared towards the canbus rev2 V3 units.
	Appreciate 0 Quote