BMW CODING success

woodpecka · 02-26-2011, 01:55 PM

Quote:

Originally Posted by xxxjecxxx

Yes he is correct, name it anything you want. The screen shot does not go with the instructions because I had already created other profiles and just randomly picked 4 to make it easier for you guys, honestly you can name it ending in whatever number you want. and like stated above you only have to create the profile once.

Your DIY is very nice, but this line is confusing.

I would suggest to clarify that section because I'm sure many users will not understand this.

cheers!

Pseudo Nim · 02-26-2011, 02:27 PM

Quote:

Originally Posted by onebadmofo

Hooray for something different. I was able to change voltage on my AE to 16 volts. Wiring and heat aside I don't need no LED AE's anymore!

Also a newsflash. Did you know that "PWM" strings he FRM module don't mean "Power" but actually "Pulse-Width Modulation". In other words FRM monitors that all the lights are getting 13 Volts at all times. And how? It turns on and off the power really quick (80hz, 80 times per second) until desired voltage is obtained. There are no problems with regular incandescent bulbs but that's why some LED's flicker when the engine is on (engine on = more voltage) and some cheaper HID inventors won't even start. Vendors remedy that by installing capacitors.

Damn, awesome. Wonder how that works with Lux AEs... or other aftermarket ones, for that matter. Wonder if they burn.

E90PAT · 02-26-2011, 02:37 PM

anybody know how ot turn off angle eye dimming and main lamps are on?

E90PAT · 02-26-2011, 02:40 PM

after months of trying different process, researching, 2 batteries, buying a netbook etc i gave it one more wack at it today and SUCCESS

why the hell isnt this a sticky yet??

woodpecka · 02-26-2011, 02:47 PM

Quote:

Originally Posted by woodpecka

Your DIY is very nice, but this line is confusing.

I would suggest to clarify that section because I'm sure many users will not understand this.

cheers!

Also, the NCS package come with an FSW PSW MAN profile and FSW_PSW.MAN / FSW_PSW.TRC files...it caused confusion. The guide could be clarified to avoid using non valid files and profiles.

BTW, this is a great guide!

JETBLK335i · 02-26-2011, 05:07 PM

Hi all, I'm doing this from a blackberry, but can someone please help me with the code to remove this error?

Pseudo Nim · 02-26-2011, 05:20 PM

Quote:

Originally Posted by JETBLK335i

Hi all, I'm doing this from a blackberry, but can someone please help me with the code to remove this error?

I think that might be adaptive xenons, no? I.e. malfunction in left/right adjustment. Are you retrofitting xenons?

[edit] you seem to have a 335, so that would be impossible, then, since I don't think 335s ever came w/o AHLs. Hm.

JETBLK335i · 02-26-2011, 05:34 PM

yes, this is AHL error. I just put in OEM Euro Xenons that do not have AHL, so hence the error.

Thanks all.

Pseudo Nim · 02-26-2011, 05:58 PM

Quote:

Originally Posted by JETBLK335i

yes, this is AHL error. I just put in OEM Euro Xenons that do not have AHL, so hence the error.

Thanks all.

Look in the thread earlier on: someone posted the option how to turn off the AHL function on xenons that do not have it.

BeWide · 02-26-2011, 06:03 PM

Quote:

Originally Posted by BeWide

Yes good idea.

But at this time I need some help, just received my cable.

Installer all the package, downloaded the lasted driver, readed carrefully the PDF.

My car comunicate with INPA beacause I see black round for battery and for ignition.

And when I press the start button against, the ignition go in blank into INPA. Then I'm sure the comunication is etablished.

So I try to load the airbag test. F9 => Karosserie => airbag

And this is what I have each time :

My latency Timer is on 1

Dont understand what can be the problem...

If anyone can help me that would great !

Anyone familiar with this error ? Why INPA can't read my module ?

xxxjecxxx · 02-26-2011, 06:18 PM

Hey this is the same error I had when I did a swap. This means that your cornering lights are not working. I will look up vale when I get home but I disabled all light error in frm I think the value was something like licht_warnung disable that and you will be fine. I'll double check value later

Quote:

Originally Posted by JETBLK335i

Hi all, I'm doing this from a blackberry, but can someone please help me with the code to remove this error?

JETBLK335i · 02-26-2011, 06:29 PM

thank you so much xxxjecxxx. i appreciate your help

Michael.R · 02-27-2011, 02:57 AM

COAPI-1000: error when executing step 43 of the DIY. Any ideas?

This is the first F6(Back) after you select CAS

7e90dan · 02-27-2011, 03:47 AM

With installing Depo P90's will i be able to code out all errors? any of you who have been following that thread will know there is yet to be a definate error solution.

leceur · 02-27-2011, 05:41 AM

My E61 programming succes and questions so far (sorry for the Dutch screens):
-Enabled MP3 function to play MP3 CD's

-Digital speed indicator:

-"Next entertainment" option added to programmable steering wheel keys:

-De-Activated AM frequentie's

-Welcome Lights is now a selectable option:

They still don't work though.... What is the right way of making them come on?

-Added the option of BMW Online, but when I want to accept it says "Telephone not found"? My BlackBerry is connected via BlueTooth hwoever? Am I doing something worng?

-Added the Voice Module ($620) to my VO, but I still can't use it. Guess I really need to buy the Voice Module....?

brinx38 · 02-27-2011, 06:02 AM

Quote:

Originally Posted by Michael.R

COAPI-1000: error when executing step 43 of the DIY. Any ideas?

This is the first F6(Back) after you select CAS

Try clearing out your *.MAN file.

spazticrecords · 02-27-2011, 07:08 AM

Quote:

Originally Posted by Michael.R

COAPI-1000: error when executing step 43 of the DIY. Any ideas?

This is the first F6(Back) after you select CAS

Open up .MAN, and .TRC file in work and clear the contents of the text file and save it so its empty and try again.

woodpecka · 02-27-2011, 09:38 AM

I have installed a set of powered seat with memory on the driver side and I need to activate the key recognition to manage the driver seat memory/position.

I have compared my .TRC file with another one with the premium package and we both have the same parameters, with a few differences.

I need some help to compare these values with your .TRC and tell me how they are setted and which option you have in your car (Powered seat or not...etc) The goal is to identified which value is driver the driver seat memory.

-----------

DOORLOCKING_SEATMEMORY
nicht_aktiv for me, aktiv for the car with premium

ELDRVSEAT
nicht_aktiv for me, aktiv for the car with premium

SITZ_AUT_VERST_AUS (Boost de siege automatique) (lumbar?)
nicht_aktiv for me, aktiv for the car with premium

SITZ_AUT_VERST_ENT
nicht_aktiv for me, aktiv for the car with premium

SITZ_AUT_VERST_ENT_T

nicht_aktiv for me, aktiv for the car with premium

GET_POSITION_TIMEOUT
5_minuten (0_minuten without premium)

we both have:
SITZMEMORY_FAHRER
nicht_aktiv (strange!!)

SITZMEMORY_FAHRER_1
nicht_aktiv (strange!!)

AUT_SITZVERSTELLUNG
nicht_aktiv

DEF_AUT_SITZVERSTELLUNG (AJUSTEMENT)
nicht_aktiv

Thanks for any help!

BlaSTiWi · 02-27-2011, 09:57 AM

Check your NCS-Expert log file.
May need an updated SP-daten files.

Quote:

Originally Posted by Michael.R

COAPI-1000: error when executing step 43 of the DIY. Any ideas?

This is the first F6(Back) after you select CAS

orangedawg · 02-27-2011, 10:46 AM

Any answer/solution to Be-Wide's question above about INPA error? I get the same one.

Toshi · 02-27-2011, 11:04 AM

Which module did you read out from?

Quote:

Originally Posted by woodpecka

I have installed a set of powered seat with memory on the driver side and I need to activate the key recognition to manage the driver seat memory/position.

I have compared my .TRC file with another one with the premium package and we both have the same parameters, with a few differences.

I need some help to compare these values with your .TRC and tell me how they are setted and which option you have in your car (Powered seat or not...etc) The goal is to identified which value is driver the driver seat memory.

-----------

DOORLOCKING_SEATMEMORY
nicht_aktiv for me, aktiv for the car with premium

ELDRVSEAT
nicht_aktiv for me, aktiv for the car with premium

SITZ_AUT_VERST_AUS (Boost de siege automatique) (lumbar?)
nicht_aktiv for me, aktiv for the car with premium

SITZ_AUT_VERST_ENT
nicht_aktiv for me, aktiv for the car with premium

SITZ_AUT_VERST_ENT_T

nicht_aktiv for me, aktiv for the car with premium

GET_POSITION_TIMEOUT
5_minuten (0_minuten without premium)

we both have:
SITZMEMORY_FAHRER
nicht_aktiv (strange!!)

SITZMEMORY_FAHRER_1
nicht_aktiv (strange!!)

AUT_SITZVERSTELLUNG
nicht_aktiv

DEF_AUT_SITZVERSTELLUNG (AJUSTEMENT)
nicht_aktiv

Thanks for any help!

Michael.R · 02-27-2011, 11:38 AM

Quote:

Originally Posted by BlaSTiWi

Check your NCS-Expert log file.
May need an updated SP-daten files.

These are the errors in the error.log in the NCSEXPER\bin directory.

----
ERROR! Modul: CVT_PROC.C, ProcNr: 02, LineNr: 10, ErrorNr: 106.
Radio_Sdars_Cic

ERROR! Modul: COAPI.CPP, Proc: coapiGetFswPswFromAsw, LineNr: 02, ErrorNr: 1000
COAPI-1000: error
----

No clues. I did have my TCU replaced about a 7 months ago (dealer installed) and I added the iPod adapter in place of the cd changer (I installed) .. not sure if that matters.

02-26-2011, 02:37 PM	#1741
E90PAT SOFLO CODING 199 Rep 3,587 Posts Drives: Z4M Join Date: Apr 2009 Location: SoFla iTrader: (18)	anybody know how ot turn off angle eye dimming and main lamps are on?
	Appreciate 0 Quote

02-26-2011, 02:40 PM	#1742
E90PAT SOFLO CODING 199 Rep 3,587 Posts Drives: Z4M Join Date: Apr 2009 Location: SoFla iTrader: (18)	after months of trying different process, researching, 2 batteries, buying a netbook etc i gave it one more wack at it today and SUCCESS why the hell isnt this a sticky yet??
	Appreciate 0 Quote

02-26-2011, 05:07 PM	#1744
JETBLK335i Lieutenant 25 Rep 437 Posts Drives: 2008 335i Join Date: Nov 2010 Location: Greenwich, CT iTrader: (3)	help Hi all, I'm doing this from a blackberry, but can someone please help me with the code to remove this error? Attached Images
	Appreciate 0 Quote

02-26-2011, 05:34 PM	#1746
JETBLK335i Lieutenant 25 Rep 437 Posts Drives: 2008 335i Join Date: Nov 2010 Location: Greenwich, CT iTrader: (3)	yes, this is AHL error. I just put in OEM Euro Xenons that do not have AHL, so hence the error. Thanks all.
	Appreciate 0 Quote

02-26-2011, 06:29 PM	#1750
JETBLK335i Lieutenant 25 Rep 437 Posts Drives: 2008 335i Join Date: Nov 2010 Location: Greenwich, CT iTrader: (3)	thank you so much xxxjecxxx. i appreciate your help
	Appreciate 0 Quote

02-27-2011, 02:57 AM	#1751
Michael.R New Member 0 Rep 15 Posts Drives: 2019 X3 M40i Join Date: Feb 2011 Location: Chicago, IL iTrader: (0) Garage List 2019 X3 M40i (G01) [0.00]	COAPI-1000: error when executing step 43 of the DIY. Any ideas? This is the first F6(Back) after you select CAS
	Appreciate 0 Quote

02-27-2011, 03:47 AM	#1752
7e90dan seven 7 Rep 202 Posts Drives: 325i Join Date: Jun 2010 Location: long island iTrader: (1)	With installing Depo P90's will i be able to code out all errors? any of you who have been following that thread will know there is yet to be a definate error solution.
	Appreciate 0 Quote

02-27-2011, 05:41 AM	#1753
leceur New Member 0 Rep 6 Posts Drives: E61 Join Date: Feb 2011 Location: The Hague iTrader: (0)	My E61 programming succes and questions so far (sorry for the Dutch screens): -Enabled MP3 function to play MP3 CD's -Digital speed indicator: -"Next entertainment" option added to programmable steering wheel keys: -De-Activated AM frequentie's -Welcome Lights is now a selectable option: They still don't work though.... What is the right way of making them come on? -Added the option of BMW Online, but when I want to accept it says "Telephone not found"? My BlackBerry is connected via BlueTooth hwoever? Am I doing something worng? -Added the Voice Module ($620) to my VO, but I still can't use it. Guess I really need to buy the Voice Module....?
	Appreciate 0 Quote

02-27-2011, 09:38 AM	#1756
woodpecka Major 68 Rep 1,026 Posts Drives: E91 Join Date: May 2010 Location: Montreal iTrader: (2)	I have installed a set of powered seat with memory on the driver side and I need to activate the key recognition to manage the driver seat memory/position. I have compared my .TRC file with another one with the premium package and we both have the same parameters, with a few differences. I need some help to compare these values with your .TRC and tell me how they are setted and which option you have in your car (Powered seat or not...etc) The goal is to identified which value is driver the driver seat memory. ----------- DOORLOCKING_SEATMEMORY nicht_aktiv for me, aktiv for the car with premium ELDRVSEAT nicht_aktiv for me, aktiv for the car with premium SITZ_AUT_VERST_AUS (Boost de siege automatique) (lumbar?) nicht_aktiv for me, aktiv for the car with premium SITZ_AUT_VERST_ENT nicht_aktiv for me, aktiv for the car with premium SITZ_AUT_VERST_ENT_T nicht_aktiv for me, aktiv for the car with premium GET_POSITION_TIMEOUT 5_minuten (0_minuten without premium) we both have: SITZMEMORY_FAHRER nicht_aktiv (strange!!) SITZMEMORY_FAHRER_1 nicht_aktiv (strange!!) AUT_SITZVERSTELLUNG nicht_aktiv DEF_AUT_SITZVERSTELLUNG (AJUSTEMENT) nicht_aktiv Thanks for any help!
	Appreciate 0 Quote

02-27-2011, 10:46 AM	#1758
orangedawg Lieutenant 31 Rep 402 Posts Drives: 328xi Join Date: Mar 2010 Location: WA iTrader: (0)	Any answer/solution to Be-Wide's question above about INPA error? I get the same one.
	Appreciate 0 Quote