Injen install

nynyny · 07-07-2015, 09:10 PM

Should there be space between the coolant tank and the pipe?

Mine is literally flush against the tank and I can't seem to tweak it.

Dhillon92 · 07-07-2015, 10:35 PM

I didn't know injen cai ran all the way down to there, shouldn't it be wrapping around the upper side of the engine like the BMS one does? Unless it now replaces that inlet pipe. I also dont understand how you got the maf sensor down there?

Edit: never mind just looked it up, didn't know it was a 2 piece design!

hailpersia · 07-08-2015, 02:44 AM

Quote:

Originally Posted by nynyny

Should there be space between the coolant tank and the pipe?

Mine is literally flush against the tank and I can't seem to tweak it.

[IMG]http://i.imgur.com/gAjr9ps.jpg" rel="ugc" target="_blank">http://<a href="http://i.imgur.com/g...Ajr9ps.jpg</a>[/IMG]

wtf... dude I think you got the fking pipe backwards...I had injen installed and I think the decal should be facing up towards the hood and by the IAT sensor.

What car is this on?

nynyny · 07-08-2015, 06:22 AM

Quote:

Originally Posted by hailpersia

wtf... dude I think you got the fking pipe backwards...I had injen installed and I think the decal should be facing up towards the hood and by the IAT sensor.

What car is this on?

E92 335... I'll double check but pretty sure it would be impossible to have it on backwards

Dhillon92 · 07-08-2015, 06:40 AM

Quote:

Originally Posted by hailpersia

wtf... dude I think you got the fking pipe backwards...I had injen installed and I think the decal should be facing up towards the hood and by the IAT sensor.

What car is this on?

Thats what I was thinking, I think that pipe in the pic definitely goes on the upper side.

nynyny · 07-08-2015, 07:55 AM

Quote:

Originally Posted by Dhillon92

Thats what I was thinking, I think that pipe in the pic definitely goes on the upper side.

Jesus, I didn't even know that was possible. I never fail to pass my own bounds of stupidity

timothy2001 · 07-08-2015, 11:33 AM

Holy crap!!!

Mine fits the exact same way so I must have the pipes wrong too!

No wonder there is a gap between the intake filter and car.

Glad I saw this as I posted months ago with pics and got nowhere. As much as I enjoy working on the car myself I really have no skill.

mike@x-ph.com · 07-08-2015, 04:49 PM

Wasn't there an installation manual included

snaimpally · 07-08-2015, 04:56 PM

Quote:

Originally Posted by nynyny

Jesus, I didn't even know that was possible. I never fail to pass my own bounds of stupidity

Join the club. For most "assemble it yourself" furniture, I get close to the end and then realize "That part should have gone in the other way" then I have to disassemble most of it and reassemble again.

snaimpally · 07-08-2015, 04:59 PM

Quote:

Originally Posted by mike@x-ph.com

Wasn't there an installation manual included

http://www.injen.com/galleries/produ...7SP1126new.pdf

nynyny · 07-08-2015, 06:00 PM

Thanks for the 'RTFM' replies. I really would not have been able to do it without it the instructions... so yes. I have them and have read through it many times trying to figure this out.

I go back to the fact that the way the bracket and the crank line harness line up, how would it be possible to have the pipe backwards?

surfcali · 07-08-2015, 07:29 PM

Quote:

Originally Posted by nynyny

Thanks for the 'RTFM' replies. I really would not have been able to do it without it the instructions... so yes. I have them and have read through it many times trying to figure this out.

I go back to the fact that the way the bracket and the crank line harness line up, how would it be possible to have the pipe backwards?

You have the pipe in the right place - otherwise you wouldn't have been able to put the MAF sensor. It's a tight fit, have to wiggle it in. To give yourself some room, adjust the couplers. Mine is close to the coolant tank but I have a finger gap of space.

nynyny · 07-08-2015, 07:52 PM

Quote:

Originally Posted by surfcali

You have the pipe in the right place - otherwise you wouldn't have been able to put the MAF sensor. It's a tight fit, have to wiggle it in. To give yourself some room, adjust the couplers. Mine is close to the coolant tank but I have a finger gap of space.

Thank you very much! Sounds like I just need to reseat it.

hailpersia · 07-08-2015, 08:21 PM

ask yourself this, "why would the sticker face that way when all they're pictures and instructions on the net have it the otherway?"

LMT0286 · 07-08-2015, 09:11 PM

There are 2 stickers on the intake. Mine looks just like yours but it's not that close to the tank. I have some space

hailpersia · 07-08-2015, 09:25 PM

Quote:

Originally Posted by LMT0286

There are 2 stickers on the intake. Mine looks just like yours but it's not that close to the tank. I have some space

problem solved....

sirjake · 07-13-2015, 01:04 PM

Awesome, I'm glad I got mine installed correctly the first time

You will be very happy with this upgrade makes a nice sound after installing it.

nynyny · 07-13-2015, 02:14 PM

Ya, the pipe was most definitely NOT backwards. Just not seated very flush to the housing. Once that was remedied, it fit fine.

And ya, it sounds great.

07-07-2015, 09:10 PM	#1
nynyny Second Lieutenant 65 Rep 204 Posts Drives: 2011 335i xDrive E92 Join Date: Apr 2013 Location: NY iTrader: (0)	Injen install Should there be space between the coolant tank and the pipe? Mine is literally flush against the tank and I can't seem to tweak it. Last edited by nynyny; 07-07-2015 at 09:56 PM..
	Appreciate 0 Tweet Quote

07-07-2015, 10:35 PM	#2
Dhillon92 Captain 82 Rep 604 Posts Drives: '11 335xi Join Date: Jul 2014 Location: Toronto iTrader: (0)	I didn't know injen cai ran all the way down to there, shouldn't it be wrapping around the upper side of the engine like the BMS one does? Unless it now replaces that inlet pipe. I also dont understand how you got the maf sensor down there? Edit: never mind just looked it up, didn't know it was a 2 piece design!
	Appreciate 0 Quote

07-08-2015, 11:33 AM	#7
timothy2001 Major 849 Rep 1,180 Posts Drives: 2011 E92 M3 6MT ZCP Join Date: Oct 2014 Location: NE Florida iTrader: (0) Garage List 2011 M3 E92 [0.00]	Holy crap!!! Mine fits the exact same way so I must have the pipes wrong too! No wonder there is a gap between the intake filter and car. Glad I saw this as I posted months ago with pics and got nowhere. As much as I enjoy working on the car myself I really have no skill.
	Appreciate 0 Quote

07-08-2015, 04:49 PM	#8
mike@x-ph.com BimmerPost Supporting Vendor 24183 Rep 190,777 Posts Drives: 07-335/12-328/18-M4/21-M4CP Join Date: Sep 2013 Location: Las Vegas iTrader: (23)	Wasn't there an installation manual included __________________ Check out our current sale by clicking on this link! https://x-ph.com/sale/ Phone number 702-494-9435
	Appreciate 0 Quote

07-08-2015, 06:00 PM	#11
nynyny Second Lieutenant 65 Rep 204 Posts Drives: 2011 335i xDrive E92 Join Date: Apr 2013 Location: NY iTrader: (0)	Thanks for the 'RTFM' replies. I really would not have been able to do it without it the instructions... so yes. I have them and have read through it many times trying to figure this out. I go back to the fact that the way the bracket and the crank line harness line up, how would it be possible to have the pipe backwards?
	Appreciate 0 Quote

07-08-2015, 08:21 PM	#14
hailpersia Lieutenant 72 Rep 436 Posts Drives: 2022 Join Date: Nov 2012 Location: Bay Area iTrader: (5)	ask yourself this, "why would the sticker face that way when all they're pictures and instructions on the net have it the otherway?"
	Appreciate 0 Quote

07-08-2015, 09:11 PM	#15
LMT0286 Drive Fast Take Chances 21 Rep 264 Posts Drives: 2011 335i e92 Join Date: Nov 2014 Location: Naples,fl iTrader: (0)	There are 2 stickers on the intake. Mine looks just like yours but it's not that close to the tank. I have some space Attached Images
	Appreciate 0 Quote

07-13-2015, 01:04 PM	#17
sirjake Private 8 Rep 58 Posts Drives: 2011 335xi Join Date: Apr 2015 Location: Seattle WA iTrader: (0) Garage List 2011 BMW 335xi (E92) [0.00]	Awesome, I'm glad I got mine installed correctly the first time You will be very happy with this upgrade makes a nice sound after installing it.
	Appreciate 0 Quote

07-13-2015, 02:14 PM	#18
nynyny Second Lieutenant 65 Rep 204 Posts Drives: 2011 335i xDrive E92 Join Date: Apr 2013 Location: NY iTrader: (0)	Ya, the pipe was most definitely NOT backwards. Just not seated very flush to the housing. Once that was remedied, it fit fine. And ya, it sounds great.
	Appreciate 0 Quote