WTB> Used Procede Rev3 or JB4

eriktufa · 03-19-2013, 08:09 AM

NewHotness · 03-19-2013, 07:50 PM

I have a JB4 G4 Board without a wiring loom as I swapped in a G5. I believe you can get the loom from BMS but have yet to look into it.

Is this what you are after?

drjekl · 03-20-2013, 04:24 AM

What about a 2.5?

eriktufa · 03-20-2013, 05:20 AM

No Rev 2.5 sorry... I've got msg about it.

I'm sure Rev 3 is a better product but if I'm wrong feel free to chime in

drjekl · 03-20-2013, 05:32 AM

Quote:

Originally Posted by eriktufa

No Rev 2.5 sorry... I've got msg about it.

I'm sure Rev 3 is a better product but if I'm wrong feel free to chime in

Depends on what you want, if you're just after tune dps fmic 2.5 does it all.

AFAIK when you wish to run E85 meth you need the rev 3, but the 2.5's go cheap (I may sell mine to get the Rev 3 and go meth/E85 soon...)

03-19-2013, 08:09 AM	#1
eriktufa 3r1k 30 Rep 360 Posts Drives: 2008 MY08 BMW E92 335i Join Date: Jan 2012 Location: Perth iTrader: (0)	WTB> Used Procede Rev3 or JB4 __________________ 12.836 @ 109.75mph (Cobb - Accessport & VRSF DP)
	Appreciate 0 Tweet Quote

03-19-2013, 07:50 PM	#2
NewHotness Private 2 Rep 85 Posts Drives: M4 Join Date: Jan 2012 Location: Australia iTrader: (0)	I have a JB4 G4 Board without a wiring loom as I swapped in a G5. I believe you can get the loom from BMS but have yet to look into it. Is this what you are after?
	Appreciate 0 Quote

03-20-2013, 04:24 AM	#3
drjekl Captain 35 Rep 809 Posts Drives: E92 335i Join Date: Jan 2013 Location: Oz iTrader: (0)	What about a 2.5?
	Appreciate 0 Quote

03-20-2013, 05:20 AM	#4
eriktufa 3r1k 30 Rep 360 Posts Drives: 2008 MY08 BMW E92 335i Join Date: Jan 2012 Location: Perth iTrader: (0)	No Rev 2.5 sorry... I've got msg about it. I'm sure Rev 3 is a better product but if I'm wrong feel free to chime in __________________ 12.836 @ 109.75mph (Cobb - Accessport & VRSF DP)
	Appreciate 0 Quote