OEM Aluminum Pedals, and some other e90 stuff..

Josh49 · 03-25-2007, 11:52 AM

Have had a real good weekend for the e90 so far. I posted the other day that it was her one year birthday, so I bought some oem aluminum pedals. I've been wanting those since I got the car. I thought they would look incredible with the black/alum interior. And they do..

Here's some pics..

1. Before (took out rubber mats from the winter, wahoo!)
2. After without floor mats
3. After with summer mats in (freshly shampooed)

4. Spent the rest of the day detailing the interior,
It looks incredible now..

Pedals look incredible! They definitely dress up the interior and make it more sport and less boring.. And so glad to have the rubber mats out..

Josh49 · 03-25-2007, 11:54 AM

Got a slip on my door Friday when I got home from work. Luckily I left a few minutes early, so I just made it in time to the post office to pick them up. Will install these when I put on my summer wheels.. Next post about the summer wheels..

I'm going to give these a shot for now. If they don't provide enough output I might order HID's. Around here on the backroads it's really nice to have the ground lit up in front of you for avoiding potholes. The next post will show why avoiding potholes is important..

teknochild · 03-25-2007, 11:59 AM

i would feel very uncomfortable drilling holes in my ppedals

Josh49 · 03-25-2007, 12:01 PM

Following Paul's DIY on e90post, I figured I'd give curb rash repair a shot. Bought some supplies as shown. I figure worst case scenario, I'll bring them to Rim Pro to have them professionally fixed. So far so good though..

First pics are after initial sanding. This is on 161's btw. One rear has two small gouges along the diameter, and some scraping on a spoke. The other wheel is a front wheel. The rash was very small. I think I'm the only person who would really notice it, and it took several minutes to find where it was/which rim it was. But hell, I figured I'd give it a shot since I had all the tools and chemicals.. Scrapes were much smaller than they look in the first two pictures. Forgot to take before pictures..

Josh49 · 03-25-2007, 12:03 PM

This is after all of the initial sanding, and a lot of cleaning and preping the surface..

Josh49 · 03-25-2007, 12:07 PM

Sanded a lot from here. Started coarse, worked my way to 2000. When I was done, if you ran your hand around everything, you could not tell which area was worked on. It was perfect.. Brought them outside in the sun, and primed them..

I probably sprayed more area than I should have. But the shapes look perfect. You cannot tell which areas I filled. I'll probably let them back a little more in the sun, and then go start sanding everything with very fine paper.

I also shook the silver colored paint for a while and tested it on some cardboard. I think the match should be exact.

Josh49 · 03-25-2007, 12:10 PM

Quote:

Originally Posted by teknochild

i would feel very uncomfortable drilling holes in my ppedals

I bought brand new cobalt bits to ensure good drilling through the hardened steel. I center punched, worked my way up thru bits, and then deburred. The holes came out perfect...

PS. I was a little nervous about this too though at first. Don't tell the others.. Results look incredible though, I am really glad I did this..

FotiosF90M5 · 03-25-2007, 12:11 PM

nice work so far.you gotta love the DIY section.

Josh49 · 03-25-2007, 12:12 PM

Quote:

Originally Posted by fotios330i

nice work so far.you gotta love the DIY section.

Thank you!!

E90 DIY section FTW!!

Chesmu · 03-25-2007, 12:13 PM

Quote:

Originally Posted by teknochild

i would feel very uncomfortable drilling holes in my ppedals

I would feel even more uncomfortable paying somebody else to drill holes in my pedals.
This is a great/easy cosmetic mod that if done patiently, is not remotely dangerous to the car.

Josh49 · 03-25-2007, 12:15 PM

Quote:

Originally Posted by Chesmu

I would feel even more uncomfortable paying somebody else to drill holes in my pedals.
This is a great/easy cosmetic mod that if done patiently, is not remotely dangerous to the car.

Yeah. I was thinking as I was doing this -

"This is perfect. It looks great, and I am 100% confident in the quality of my work. I wonder the hack job that they would do at the dealership.."

I definitely would not have trusted someone else to do this..

Chesmu · 03-25-2007, 12:38 PM

that curb rash repair looks GREAT!

Josh49 · 03-25-2007, 01:05 PM

Thanks Chesmu!! I can't wait to see the final product. I just brought them into the garage and will set up a space heater. I am ready to sand (2000 grit), clean, and paint the silver. Then I'll maybe do the clearcoat tonight..

I vaccuumed and cleaned the whole garage with the shop vac to minimize the amount of crap in the air and floor. Want to do this in as clean of an environment as possible.. I can't wait to see the final product..

PS. I'm an absolute perfectionist. I am extremely happy with how things look right now..

cgnahc · 03-25-2007, 01:52 PM

Hmm, you put in the dead pedal too. I like it. I put in brake and accelerator pedals and was wondering how it would look. I got the same H11 bulbs for my fogs too, but have not installed yet.

Brunotheboxer · 03-25-2007, 03:22 PM

everything looks top notch to me. unlike you i am a perfectionist but only 75% confident in the quality of my work.

Josh49 · 03-25-2007, 03:39 PM

Quote:

Originally Posted by Brunotheboxer

everything looks top notch to me. unlike you i am a perfectionist but only 75% confident in the quality of my work.

Bruno, I think I know the problem.. You're supposed to drink after you work on your car, not during..

Brunotheboxer · 03-25-2007, 03:41 PM

Quote:

Originally Posted by Josh49

Bruno, I think I know the problem.. You're supposed to drink after you work on your car, not during..

but then my work really suffers.

canucklion · 03-25-2007, 03:42 PM

the paddles compliment your aluminum interior

Josh49 · 03-25-2007, 03:46 PM

Quote:

Originally Posted by Brunotheboxer

but then my work really suffers.

In college I used to play hockey in some pickup leagues and there were definitely guys who were absolutely worthless on the ice without a beer or two in them to loosen them up... And I'm being dead serious..

Josh49 · 03-25-2007, 03:46 PM

Quote:

Originally Posted by canucklion

the paddles compliment your aluminum interior

Thanks!!

Brunotheboxer · 03-25-2007, 04:10 PM

Quote:

Originally Posted by Josh49

In college I used to play hockey in some pickup leagues and there were definitely guys who were absolutely worthless on the ice without a beer or two in them to loosen them up... And I'm being dead serious..

same principle applies to golf.

ska///235i · 03-25-2007, 04:13 PM

josh...good work on the wheels

how much you paid for the pedals....I'm thinking about aftermarket ones

Is warm now, dont need to wait till summer...hurry and put them bring lights on & post pics asap

03-25-2007, 11:52 AM	#1
Josh49 Major General 252 Rep 6,664 Posts Drives: E90 325xi Join Date: Jan 2006 Location: Boston, MA iTrader: (33)	OEM Aluminum Pedals, and some other e90 stuff.. Have had a real good weekend for the e90 so far. I posted the other day that it was her one year birthday, so I bought some oem aluminum pedals. I've been wanting those since I got the car. I thought they would look incredible with the black/alum interior. And they do.. Here's some pics.. 1. Before (took out rubber mats from the winter, wahoo!) 2. After without floor mats 3. After with summer mats in (freshly shampooed) 4. Spent the rest of the day detailing the interior, It looks incredible now.. Pedals look incredible! They definitely dress up the interior and make it more sport and less boring.. And so glad to have the rubber mats out.. Attached Images __________________ E90 325XI, MYSTIC BLUE ON BLACK/ALUM, STEP, NAV, PDC, CWP, XENON, SIRIUS, ALARM, MUD GUARDS, CLEARBRA, CHROME GRILLS AND TIPS, VALENTINE 1 (HARDWIRED), HO CERAMIC 40%, 161'S, REAR FOG MOD, LUX 4.0, BLACKLINES, OEM PEDALS, MTEC FOGS, GRUPPE-M REP INTAKE. 156'S AND RUBBER MATS FOR THE WINTER. Last edited by Josh49; 03-25-2007 at 12:08 PM..
	Appreciate 0 Tweet Quote

03-25-2007, 11:54 AM	#2
Josh49 Major General 252 Rep 6,664 Posts Drives: E90 325xi Join Date: Jan 2006 Location: Boston, MA iTrader: (33)	Got a slip on my door Friday when I got home from work. Luckily I left a few minutes early, so I just made it in time to the post office to pick them up. Will install these when I put on my summer wheels.. Next post about the summer wheels.. I'm going to give these a shot for now. If they don't provide enough output I might order HID's. Around here on the backroads it's really nice to have the ground lit up in front of you for avoiding potholes. The next post will show why avoiding potholes is important.. Attached Images __________________ E90 325XI, MYSTIC BLUE ON BLACK/ALUM, STEP, NAV, PDC, CWP, XENON, SIRIUS, ALARM, MUD GUARDS, CLEARBRA, CHROME GRILLS AND TIPS, VALENTINE 1 (HARDWIRED), HO CERAMIC 40%, 161'S, REAR FOG MOD, LUX 4.0, BLACKLINES, OEM PEDALS, MTEC FOGS, GRUPPE-M REP INTAKE. 156'S AND RUBBER MATS FOR THE WINTER.
	Appreciate 0 Quote

03-25-2007, 11:59 AM	#3
teknochild Your resident 4um troll 123 Rep 2,020 Posts Drives: 335 coupe Join Date: Dec 2006 Location: fl iTrader: (0)	i would feel very uncomfortable drilling holes in my ppedals __________________ RAWRrrrr
	Appreciate 0 Quote

03-25-2007, 12:01 PM	#4
Josh49 Major General 252 Rep 6,664 Posts Drives: E90 325xi Join Date: Jan 2006 Location: Boston, MA iTrader: (33)	Following Paul's DIY on e90post, I figured I'd give curb rash repair a shot. Bought some supplies as shown. I figure worst case scenario, I'll bring them to Rim Pro to have them professionally fixed. So far so good though.. First pics are after initial sanding. This is on 161's btw. One rear has two small gouges along the diameter, and some scraping on a spoke. The other wheel is a front wheel. The rash was very small. I think I'm the only person who would really notice it, and it took several minutes to find where it was/which rim it was. But hell, I figured I'd give it a shot since I had all the tools and chemicals.. Scrapes were much smaller than they look in the first two pictures. Forgot to take before pictures.. Attached Images __________________ E90 325XI, MYSTIC BLUE ON BLACK/ALUM, STEP, NAV, PDC, CWP, XENON, SIRIUS, ALARM, MUD GUARDS, CLEARBRA, CHROME GRILLS AND TIPS, VALENTINE 1 (HARDWIRED), HO CERAMIC 40%, 161'S, REAR FOG MOD, LUX 4.0, BLACKLINES, OEM PEDALS, MTEC FOGS, GRUPPE-M REP INTAKE. 156'S AND RUBBER MATS FOR THE WINTER.
	Appreciate 0 Quote

03-25-2007, 12:03 PM	#5
Josh49 Major General 252 Rep 6,664 Posts Drives: E90 325xi Join Date: Jan 2006 Location: Boston, MA iTrader: (33)	This is after all of the initial sanding, and a lot of cleaning and preping the surface.. Attached Images __________________ E90 325XI, MYSTIC BLUE ON BLACK/ALUM, STEP, NAV, PDC, CWP, XENON, SIRIUS, ALARM, MUD GUARDS, CLEARBRA, CHROME GRILLS AND TIPS, VALENTINE 1 (HARDWIRED), HO CERAMIC 40%, 161'S, REAR FOG MOD, LUX 4.0, BLACKLINES, OEM PEDALS, MTEC FOGS, GRUPPE-M REP INTAKE. 156'S AND RUBBER MATS FOR THE WINTER.
	Appreciate 0 Quote

03-25-2007, 12:07 PM	#6
Josh49 Major General 252 Rep 6,664 Posts Drives: E90 325xi Join Date: Jan 2006 Location: Boston, MA iTrader: (33)	Sanded a lot from here. Started coarse, worked my way to 2000. When I was done, if you ran your hand around everything, you could not tell which area was worked on. It was perfect.. Brought them outside in the sun, and primed them.. I probably sprayed more area than I should have. But the shapes look perfect. You cannot tell which areas I filled. I'll probably let them back a little more in the sun, and then go start sanding everything with very fine paper. I also shook the silver colored paint for a while and tested it on some cardboard. I think the match should be exact. Attached Images __________________ E90 325XI, MYSTIC BLUE ON BLACK/ALUM, STEP, NAV, PDC, CWP, XENON, SIRIUS, ALARM, MUD GUARDS, CLEARBRA, CHROME GRILLS AND TIPS, VALENTINE 1 (HARDWIRED), HO CERAMIC 40%, 161'S, REAR FOG MOD, LUX 4.0, BLACKLINES, OEM PEDALS, MTEC FOGS, GRUPPE-M REP INTAKE. 156'S AND RUBBER MATS FOR THE WINTER.
	Appreciate 0 Quote

03-25-2007, 12:11 PM	#8
FotiosF90M5 ///M Specialist South Shore BMW 770 Rep 7,108 Posts Drives: 2021 M5 Comp BHG/Silverstone Join Date: Jan 2007 Location: South Shore, MA iTrader: (62)	nice work so far.you gotta love the DIY section. __________________ 2021 M5 COMPETITION LCI Brands Hatch Gray on SIlverstone, carbon roof, comp wheels, Mperf splitter, carbon pro spoiler, carbon diffuser , carbon paddles, executive pkg. Dinan HAS, RaceChip, dinan spacers, FC stud kit, etc
	Appreciate 0 Quote

03-25-2007, 12:38 PM	#12
Chesmu Brigadier General 89 Rep 3,011 Posts Drives: 2013 X6 Join Date: Dec 2005 Location: Phoenix,AZ iTrader: (2) Garage List 2006 330i [0.00] 2006 330i [0.00]	that curb rash repair looks GREAT! __________________ "Teach the ignorant. Ignore the stupid."
	Appreciate 0 Quote

03-25-2007, 01:05 PM	#13
Josh49 Major General 252 Rep 6,664 Posts Drives: E90 325xi Join Date: Jan 2006 Location: Boston, MA iTrader: (33)	Thanks Chesmu!! I can't wait to see the final product. I just brought them into the garage and will set up a space heater. I am ready to sand (2000 grit), clean, and paint the silver. Then I'll maybe do the clearcoat tonight.. I vaccuumed and cleaned the whole garage with the shop vac to minimize the amount of crap in the air and floor. Want to do this in as clean of an environment as possible.. I can't wait to see the final product.. PS. I'm an absolute perfectionist. I am extremely happy with how things look right now.. __________________ E90 325XI, MYSTIC BLUE ON BLACK/ALUM, STEP, NAV, PDC, CWP, XENON, SIRIUS, ALARM, MUD GUARDS, CLEARBRA, CHROME GRILLS AND TIPS, VALENTINE 1 (HARDWIRED), HO CERAMIC 40%, 161'S, REAR FOG MOD, LUX 4.0, BLACKLINES, OEM PEDALS, MTEC FOGS, GRUPPE-M REP INTAKE. 156'S AND RUBBER MATS FOR THE WINTER.
	Appreciate 0 Quote

03-25-2007, 01:52 PM	#14
cgnahc Major 84 Rep 1,263 Posts Drives: TiAg E90 ZSP Join Date: Dec 2006 Location: Westlake Village, CA iTrader: (9)	Hmm, you put in the dead pedal too. I like it. I put in brake and accelerator pedals and was wondering how it would look. I got the same H11 bulbs for my fogs too, but have not installed yet.
	Appreciate 0 Quote

03-25-2007, 03:22 PM	#15
Brunotheboxer Colonel 371 Rep 2,984 Posts Drives: 2014 Shelby GT500. Join Date: Jan 2006 Location: Boston/Cape Cod iTrader: (0)	everything looks top notch to me. unlike you i am a perfectionist but only 75% confident in the quality of my work. __________________ "...I maybe drunk, but you're ugly, and I can sober up..."
	Appreciate 0 Quote

03-25-2007, 03:42 PM	#18
canucklion pull my finger to get your kinder® surprise 148 Rep 10,455 Posts Drives: circles around you Join Date: Dec 2005 Location: Toronto, Canada iTrader: (9)	the paddles compliment your aluminum interior __________________
	Appreciate 0 Quote

03-25-2007, 04:13 PM	#22
ska///235i ***** noob 1368 Rep 10,479 Posts Drives: 325xi>M235i>428GCx Mspor Join Date: Sep 2005 Location: Boston iTrader: (34) Garage List 2006 325xi [0.00]	josh...good work on the wheels how much you paid for the pedals....I'm thinking about aftermarket ones Is warm now, dont need to wait till summer...hurry and put them bring lights on & post pics asap __________________ 2006 325xi (Sold) 2014 M235I (Current) 2015 428xi Gran Coupe (STB)
	Appreciate 0 Quote