BMW CODING success

akotten · 03-30-2013, 09:54 PM

Quote:

Originally Posted by ******84

PM me guys with your emails, I have it on google drive.

PM sent! Thanks!

sammk · 03-31-2013, 12:08 PM

Quote:

Originally Posted by ******84

PM me guys with your emails, I have it on google drive.

Another PM sent. Thank you!

pweber84 · 03-31-2013, 12:47 PM

You got it.

zibawal · 03-31-2013, 12:51 PM

pm sent
thanks

akotten · 04-02-2013, 01:45 PM

Ok, I think I need just a little help. I've installed/patched BMW Standard Tools 2.12 and can read my VIN, etc. Then when I change to CAS module, it doesnt give me the option to read ECU. Only "Change Job" and "Execute Job". Did these options change with the new software? Is there a "Job" I need to select from the list it gives me to read the ecu (CAS)?

pweber84 · 04-02-2013, 01:52 PM

What do you mean when you say "read ECU"?

EDIT: Oh, I see now (F4 read ECU), it is weird, did you try to install German version? Mine is working good and I can read ECU.

akotten · 04-02-2013, 03:58 PM

Quote:

Originally Posted by ******84

What do you mean when you say "read ECU"?

EDIT: Oh, I see now (F4 read ECU), it is weird, did you try to install German version? Mine is working good and I can read ECU.

Hmm...So I installed BMW ST 2.12, patched the exe, then added a bunch of missing files including the daten files (V48.1). After I moved over the "missing files" some of the menu buttons changed to English, which was really helpful. Maybe I'll reinstall, patch the exe, and only copy the daten files.

akotten · 04-02-2013, 09:35 PM

Quote:

Originally Posted by ******84

What do you mean when you say "read ECU"?

EDIT: Oh, I see now (F4 read ECU), it is weird, did you try to install German version? Mine is working good and I can read ECU.

Are you using a 64 bit OS? I can't seem to get any further.

pweber84 · 04-03-2013, 02:38 AM

Yes, I use 64bit OS, but I didn't use patch or anything. I work with German language version. Maybe here is the issue.

Cuticuti · 04-03-2013, 07:15 AM

Quote:

Originally Posted by ******84

No, you don't need, everything works in Win 7 32&64 bit.

Thanks for your files. I could install the Bmw tools. However, I could not run the tool. It said it is required to run on WinXP. I am using Win7 64 bit OS. Do you know what I am missing here in order to set up the tool?
Thanks.

pweber84 · 04-03-2013, 07:26 AM

You mean tool32?

Did you install Standard tools 2.12? Must work with Win7 64bit.

Cuticuti · 04-03-2013, 07:30 AM

Quote:

Originally Posted by ajsalida

Here is a copy of NCS_DIY & NCS Expertmode DIY

Hello.
I tried to view 2nd file but it requires password. Could you help?
Thanks.

.

Cuticuti · 04-03-2013, 07:34 AM

Quote:

Originally Posted by ******84

You mean tool32?

Did you install Standard tools 2.12? Must work with Win7 64bit.

Yes, I did install the Standard tools 2.12. I will try to run it again tonight.

cn555ic · 04-03-2013, 07:46 AM

The 64 bit version has glitches and doesnt allow you to read individual ECU (F4) button. Its a known issue.

pweber84 · 04-03-2013, 08:09 AM

Quote:

Originally Posted by cn555ic

The 64 bit version has glitches and doesnt allow you to read individual ECU (F4) button. Its a known issue.

Mine can read ECU, but I use German language version, I think that conversion from DE to EN makes this issue.

All Standard Tool works on my Win 7 64 bits.

akotten · 04-03-2013, 10:58 AM

Quote:

Originally Posted by ******84

Mine can read ECU, but I use German language version, I think that conversion from DE to EN makes this issue.

All Standard Tool works on my Win 7 64 bits.

The problem I had, is that I couldn't modify the profile because the password didn't work. That is why I patched it.

cn555ic · 04-03-2013, 11:21 AM

Quote:

Originally Posted by ******84

Mine can read ECU, but I use German language version, I think that conversion from DE to EN makes this issue.

All Standard Tool works on my Win 7 64 bits.

Thats weird I have loaded up the German version and it does the same thing..

akotten · 04-03-2013, 11:23 AM

deleted, double post

pweber84 · 04-03-2013, 11:30 AM

Quote:

Originally Posted by cn555ic

Thats weird I have loaded up the German version and it does the same thing..

Last time on this forum I showed a print screens as a proof, see my threads

As far as I remember I discussed with you about it

akotten · 04-03-2013, 11:33 AM

Quote:

Originally Posted by ******84

Last time on this forum I showed a print screens as a proof, see my threads

As far as I remember I discussed with you about it

Do you know the password to edit the profiles on the NCS Expert german verison? Or share yours? (I don't know if that works)

pweber84 · 04-03-2013, 11:55 AM

Quote:

Originally Posted by akotten

Do you know the password to edit the profiles on the NCS Expert german verison? Or share yours (I don't know if that works)

No, I have created profiles in patched version ;/. I can provide you them. Which exactly you need?

akotten · 04-03-2013, 11:58 AM

Quote:

Originally Posted by ******84

No, I have created profiles in patched version ;/. I can provide you them. Which exactly you need?

I'm assuming I just need the expert mode one?

03-31-2013, 12:47 PM	#4425
pweber84 Banned 49 Rep 347 Posts Drives: BMW 330d e91 Join Date: Jan 2013 Location: Berlin, Germany / PL, Posen iTrader: (2)	You got it.
	Appreciate 0 Quote

03-31-2013, 12:51 PM	#4426
zibawal Major 36 Rep 1,105 Posts Drives: 2012 X5D Join Date: Aug 2006 Location: SFO BAY AREA iTrader: (0)	pm sent thanks
	Appreciate 0 Quote

04-02-2013, 01:45 PM	#4427
akotten Major 38 Rep 1,079 Posts Drives: 2004 M3 Join Date: Mar 2011 Location: Wichita, KS iTrader: (2)	Ok, I think I need just a little help. I've installed/patched BMW Standard Tools 2.12 and can read my VIN, etc. Then when I change to CAS module, it doesnt give me the option to read ECU. Only "Change Job" and "Execute Job". Did these options change with the new software? Is there a "Job" I need to select from the list it gives me to read the ecu (CAS)? __________________ 2004 E46 M3 \| Imola Red on Cinnamon \| Slicktop \| Manual Seats \| 6spd MT \|
	Appreciate 0 Quote

04-02-2013, 01:52 PM	#4428
pweber84 Banned 49 Rep 347 Posts Drives: BMW 330d e91 Join Date: Jan 2013 Location: Berlin, Germany / PL, Posen iTrader: (2)	What do you mean when you say "read ECU"? EDIT: Oh, I see now (F4 read ECU), it is weird, did you try to install German version? Mine is working good and I can read ECU. Last edited by pweber84; 04-02-2013 at 02:00 PM..
	Appreciate 0 Quote

04-03-2013, 02:38 AM	#4431
pweber84 Banned 49 Rep 347 Posts Drives: BMW 330d e91 Join Date: Jan 2013 Location: Berlin, Germany / PL, Posen iTrader: (2)	Yes, I use 64bit OS, but I didn't use patch or anything. I work with German language version. Maybe here is the issue.
	Appreciate 0 Quote

04-03-2013, 07:26 AM	#4433
pweber84 Banned 49 Rep 347 Posts Drives: BMW 330d e91 Join Date: Jan 2013 Location: Berlin, Germany / PL, Posen iTrader: (2)	You mean tool32? Did you install Standard tools 2.12? Must work with Win7 64bit.
	Appreciate 0 Quote

04-03-2013, 07:46 AM	#4436
cn555ic 441 Rep 18,331 Posts Drives: 335i Join Date: Jun 2007 Location: US iTrader: (6)	The 64 bit version has glitches and doesnt allow you to read individual ECU (F4) button. Its a known issue.
	Appreciate 0 Quote

04-03-2013, 11:23 AM	#4440
akotten Major 38 Rep 1,079 Posts Drives: 2004 M3 Join Date: Mar 2011 Location: Wichita, KS iTrader: (2)	deleted, double post __________________ 2004 E46 M3 \| Imola Red on Cinnamon \| Slicktop \| Manual Seats \| 6spd MT \|
	Appreciate 0 Quote