Hartge replica lip installation

Boondoggler · 11-12-2006, 06:30 PM

Quote:

Originally Posted by FrankoQ

Outstanding job.
I was thinking of removing my lip to add more double side tape to try to
close that gap.
Now, thanks to you, I know what I need to do.

FrankoQ, based on your input, I put a lot of 3m tape on the pillars and it still was not able to close those gaps to my liking. The bumper epoxy provides a much cleaner look. After re-examining under bright lights, I'm back to thinking about painting it to match the Monaco Blue. If I do it, I'll take more pics.

FrankoQ · 11-13-2006, 07:29 AM

Quote:

Originally Posted by Boondoggler

FrankoQ, based on your input, I put a lot of 3m tape on the pillars and it still was not able to close those gaps to my liking. The bumper epoxy provides a much cleaner look. After re-examining under bright lights, I'm back to thinking about painting it to match the Monaco Blue. If I do it, I'll take more pics.

So the black epoxy doesn't blend with the monaco blue?
Are you planning on just touch up paint?

I might start this project this weekend.

Boondoggler · 11-13-2006, 08:16 AM

Quote:

Originally Posted by FrankoQ

So the black epoxy doesn't blend with the monaco blue?
Are you planning on just touch up paint?

It actually blends quite well. You have to be looking at it pretty closely to notice it's black and not blue. For example, my wife couldn't tell until I pointed my bright halogen work light at it and pointed it out. When I told her I was thinking of painting it to match the body color she thought I was nuts, saying there was no reason to, as no one would notice. More risk than potential reward was her opinion.

Unfortunately I'm a bit of a perfectionist with these things. I'm waiting on making a final decision about painting it until I get the car out in the sunlight and get a really good look at it. It's been raining for a couple days, so I've only been able to look at it under artificial light in the garage.

Boondoggler · 11-13-2006, 03:44 PM

FrankoQ, this is for you.

I changed the settings on my camera and was able to get much better pictures. I've taken four pictures, initially taking them from a distance, then moving closer and closer. All pictures were taken with the bumper well lit with a halogen work lamp and the camera flash on. The bumper is fairly dirty, and obviously wet from the rain. I thoroughly wiped down the focus area of the pictures.

This first picture is from a standing position, the camera held at head level, and it is a very good representation of what it looks like to the naked eye when you are standing over the bumper. From this distance, with the naked eye, the epoxy looks the same as the Monaco Blue body color.

This second picture is from about waist high, standing over the bumper, representing what it looks like if you are bent over, looking at the bumper. If you look really closely from this distance, you can slightly tell that the epoxy is darker than the Monaco Blue body color.

This third picture is from about 12 inches away, examining the bumper. At this distance you can start to clearly see the epoxy is a different, darker color than the Monaco Blue body color.

This last picture is an extreme closeup, from only 3-4 inches away. The bright flash makes the epoxy look a little more grey than it actually is, it is a darker black than what this picture presents, but clearly not the same as the Monaco Blue body color.

FrankoQ · 11-13-2006, 04:10 PM

Great pics. This really helps. Thanks.

I'll go ahead with the epoxy and later decide if I need to paint it.

thd13 · 03-23-2007, 03:31 PM

Sorry to revive such an old thread. But great work guys!!! This will really help with my ACS lip install this weekend. Thanks Gents!!

Swoop · 04-09-2007, 11:01 PM

Hey Frank, or anyone in th DC area, I just got a ACS lip and was curious if anyone would put it on for me?

FrankoQ · 04-10-2007, 07:15 AM

Quote:

Originally Posted by Swoop

Hey Frank, or anyone in th DC area, I just got a ACS lip and was curious if anyone would put it on for me?

is it the real one or the replica?

Send me a PM and we can arrange something.

FrankoQ · 04-13-2007, 02:00 PM

Swoop and I got together to install the ACS lip.
Pretty much the same instructions as the Hartge lip.
The accent bars were removed and we did not put them back.
I think swoop might paint the middle one white to match the car.
The side ones need to be cut if you want them back.
But, the white car looked better without them.

Here are some pics of the final result.

Name: DSC06253small.JPG
Views: 1933
Size: 93.1 KB

Name: DSC06253small.JPG
Views: 1933
Size: 93.1 KB

Name: DSC06256small.JPG
Views: 1904
Size: 107.5 KB

Name: DSC06257small.JPG
Views: 1866
Size: 102.4 KB

Swoop · 04-14-2007, 09:23 PM

I'm not sure if I've done this yet, but I really need to thank Frank for helping me (basically doing it all himself) put on my ACS front lip. You did a fantastic job and it was a pleasure meeting you.

alphaplaya23 · 04-18-2007, 02:11 PM

i did the install myself too and i still have that freaking gap . all the double sided tape in the world wont be able to close it and epoxy is out of the question. does anyone know the size of the screw that goes through the bumper by the fog lights into a clip apparently... because i think that is the key to solving this issue.

BTW Swoop should look into painting that grille.. i did mine aluminum look so that it looks copesthetic.

Swoop · 04-18-2007, 06:03 PM

Pics? What part of the grille?

wuufer001 · 04-24-2007, 12:58 AM

Quote:

Originally Posted by FrankoQ

Swoop and I got together to install the ACS lip.
Pretty much the same instructions as the Hartge lip.
The accent bars were removed and we did not put them back.
I think swoop might paint the middle one white to match the car.
The side ones need to be cut if you want them back.
But, the white car looked better without them.

Here are some pics of the final result.

Attachment 69006
Attachment 69007
Attachment 69008

the left and right accent bars were left out after installation right? only the middle one is back in the same place

FrankoQ · 04-24-2007, 05:51 AM

Quote:

Originally Posted by wuufer001

the left and right accent bars were left out after installation right? only the middle one is back in the same place

That is correct.

Mark Chen · 04-24-2007, 09:25 AM

how to remove the left and right accent bars??
Just pull them out??

FrankoQ · 04-24-2007, 01:39 PM

Quote:

Originally Posted by Mark Chen

how to remove the left and right accent bars??
Just pull them out??

answers here:
http://www.e90post.com/forums/showth...ght=accent+bar

Mark Chen · 04-24-2007, 02:52 PM

Quote:

Originally Posted by FrankoQ

answers here:
http://www.e90post.com/forums/showth...ght=accent+bar

thanks a lot!!

Jason · 05-03-2007, 09:29 PM

Added to DIY master list - http://www.e90post.com/forums/showthread.php?t=1721

Thanks for sharing.

addicted2bmw · 04-06-2009, 09:38 AM

Do I need to put screws underneath or will the 3m tape on the pillars and corners be enough to hold it?

Please Help!

Thanks

FrankoQ · 04-06-2009, 08:16 PM

Quote:

Originally Posted by addicted2bmw

Do I need to put screws underneath or will the 3m tape on the pillars and corners be enough to hold it?

Please Help!

Thanks

No need to put screws.
The tape will hold the lip.
Use enough tape!

11-13-2006, 03:44 PM	#26
Boondoggler Lieutenant 72 Rep 402 Posts Drives: 2023 G01 LCI X3 M40i Join Date: Jun 2006 Location: Lawrenceville, NJ iTrader: (1) Garage List 2016 340i xDrive [6.50]	FrankoQ, this is for you. I changed the settings on my camera and was able to get much better pictures. I've taken four pictures, initially taking them from a distance, then moving closer and closer. All pictures were taken with the bumper well lit with a halogen work lamp and the camera flash on. The bumper is fairly dirty, and obviously wet from the rain. I thoroughly wiped down the focus area of the pictures. This first picture is from a standing position, the camera held at head level, and it is a very good representation of what it looks like to the naked eye when you are standing over the bumper. From this distance, with the naked eye, the epoxy looks the same as the Monaco Blue body color. This second picture is from about waist high, standing over the bumper, representing what it looks like if you are bent over, looking at the bumper. If you look really closely from this distance, you can slightly tell that the epoxy is darker than the Monaco Blue body color. This third picture is from about 12 inches away, examining the bumper. At this distance you can start to clearly see the epoxy is a different, darker color than the Monaco Blue body color. This last picture is an extreme closeup, from only 3-4 inches away. The bright flash makes the epoxy look a little more grey than it actually is, it is a darker black than what this picture presents, but clearly not the same as the Monaco Blue body color. __________________ 2023 G01 LCI X3 M40i My Garage \| Phytonic Blue \| Black Sensatec \| Carbon Fiber Trim \| Parking \| Premium \| Remote \| Wireless \| Harmon Kardon \| 19" 887M Bi-color Midnight Grey
	Appreciate 0 Quote

11-13-2006, 04:10 PM	#27
FrankoQ Deny everything 217 Rep 11,378 Posts Drives: 2006 330i; 2015 X6, S1000RR Join Date: Apr 2006 Location: Beautiful MD iTrader: (5) Garage List 2015 BMW X6 [0.00] 2006 330i [0.00]	Great pics. This really helps. Thanks. I'll go ahead with the epoxy and later decide if I need to paint it. __________________ I need a drink
	Appreciate 0 Quote

03-23-2007, 03:31 PM	#28
thd13 Major 46 Rep 1,445 Posts Drives: A07 330i Join Date: Aug 2005 Location: Murrland iTrader: (4) Garage List 2006 330i [0.00]	Sorry to revive such an old thread. But great work guys!!! This will really help with my ACS lip install this weekend. Thanks Gents!! __________________ My other ride is your mom.
	Appreciate 0 Quote

04-09-2007, 11:01 PM	#29
Swoop Resident Noob 134 Rep 1,911 Posts Drives: You Crazy w/ My Rear Fogs Join Date: Mar 2007 Location: Manhattan Beach, California iTrader: (6) Garage List 2007 335i [0.00] 2004 Acura TSX [0.00]	Hey Frank, or anyone in th DC area, I just got a ACS lip and was curious if anyone would put it on for me? __________________ A/W 335i e90 l Sirius l M6 Wheels l M5 Bumper l Eibachs l 20% Tint l CPE Exhaust & Standback l BLK Matte Trim l Xenon Interiors l Lux 4.0 l 8000k D1S l MTEC H7/H11s l Invisibulbs l BLK Matte Grill l Blacklines l Alum Pedals l Splt Armrest l Rear Fogs l RBT l K&N
	Appreciate 0 Quote

04-13-2007, 02:00 PM	#31
FrankoQ Deny everything 217 Rep 11,378 Posts Drives: 2006 330i; 2015 X6, S1000RR Join Date: Apr 2006 Location: Beautiful MD iTrader: (5) Garage List 2015 BMW X6 [0.00] 2006 330i [0.00]	Swoop and I got together to install the ACS lip. Pretty much the same instructions as the Hartge lip. The accent bars were removed and we did not put them back. I think swoop might paint the middle one white to match the car. The side ones need to be cut if you want them back. But, the white car looked better without them. Here are some pics of the final result. __________________ I need a drink
	Appreciate 0 Quote

04-14-2007, 09:23 PM	#32
Swoop Resident Noob 134 Rep 1,911 Posts Drives: You Crazy w/ My Rear Fogs Join Date: Mar 2007 Location: Manhattan Beach, California iTrader: (6) Garage List 2007 335i [0.00] 2004 Acura TSX [0.00]	I'm not sure if I've done this yet, but I really need to thank Frank for helping me (basically doing it all himself) put on my ACS front lip. You did a fantastic job and it was a pleasure meeting you. __________________ A/W 335i e90 l Sirius l M6 Wheels l M5 Bumper l Eibachs l 20% Tint l CPE Exhaust & Standback l BLK Matte Trim l Xenon Interiors l Lux 4.0 l 8000k D1S l MTEC H7/H11s l Invisibulbs l BLK Matte Grill l Blacklines l Alum Pedals l Splt Armrest l Rear Fogs l RBT l K&N
	Appreciate 0 Quote

04-18-2007, 02:11 PM	#33
alphaplaya23 Private 4 Rep 51 Posts Drives: 2006 BMW 330xi Join Date: Jan 2007 Location: Bergen County, NJ iTrader: (1) Garage List 2006 330xi [0.00]	i did the install myself too and i still have that freaking gap . all the double sided tape in the world wont be able to close it and epoxy is out of the question. does anyone know the size of the screw that goes through the bumper by the fog lights into a clip apparently... because i think that is the key to solving this issue. BTW Swoop should look into painting that grille.. i did mine aluminum look so that it looks copesthetic. __________________ 2006 BMW 330xi/Alpine on Terra/I-Drive/Sport Pack/Premium Pack/Cold Pack/Comfort Access/Blacklines/30% Tints/Carbon Emblems/ACS Roof Spoiler/OEM Deck Spoiler/ACS Lip Spoiler/Mattig Eyelids/Piano Black trim/smoked side markers.
	Appreciate 0 Quote

04-18-2007, 06:03 PM	#34
Swoop Resident Noob 134 Rep 1,911 Posts Drives: You Crazy w/ My Rear Fogs Join Date: Mar 2007 Location: Manhattan Beach, California iTrader: (6) Garage List 2007 335i [0.00] 2004 Acura TSX [0.00]	Pics? What part of the grille? __________________ A/W 335i e90 l Sirius l M6 Wheels l M5 Bumper l Eibachs l 20% Tint l CPE Exhaust & Standback l BLK Matte Trim l Xenon Interiors l Lux 4.0 l 8000k D1S l MTEC H7/H11s l Invisibulbs l BLK Matte Grill l Blacklines l Alum Pedals l Splt Armrest l Rear Fogs l RBT l K&N
	Appreciate 0 Quote

04-24-2007, 09:25 AM	#37
Mark Chen Colonel 113 Rep 2,889 Posts Drives: 11' E93 M3 LMB Join Date: Oct 2005 Location: Taipei iTrader: (1) Garage List 2011 BMW E93 M3 [0.00]	how to remove the left and right accent bars?? Just pull them out?? __________________ 11' LMB E93///M3 KW V3 / 19" BBS LM DB-SLD 20th limited edition / AP Racing Pro 5000+ BBK / Akrapovic Evolution Line Exhaust / Arkym Rear Diffuser /Dinan Stage 2 Engine Transmission software
	Appreciate 0 Quote

05-03-2007, 09:29 PM	#40
Jason Administrator 40636 Rep 21,237 Posts Drives: F80 M3 Join Date: Mar 2005 Location: USA iTrader: (0)	Added to DIY master list - http://www.e90post.com/forums/showthread.php?t=1721 Thanks for sharing. __________________ Check on the Latest BMW News Become a fan of Bimmerpost Facebook Follow us on Bimmerpost Twitter Subscribe to Bimmerpost Youtube Channel
	Appreciate 0 Quote

04-06-2009, 09:38 AM	#41
addicted2bmw Private First Class 7 Rep 194 Posts Drives: 2006 e90 Join Date: Nov 2008 Location: Ottawa iTrader: (1) Garage List 2006 e90 [0.00]	HELP! Do I need to put screws underneath or will the 3m tape on the pillars and corners be enough to hold it? Please Help! Thanks __________________ 19" Staggered VMR 710s \| Eibach Pro System \| Matte Black Kidney Grills \| Debadged \| CF Roundels and Centre Caps \| Blacklines (Depo) \| Hartge Lip \| Mtech Spoiler
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search