Sponsored by The Tire Rack

[ThaPaki]

Lookin at 20s for my 2011 e92 coupe. Vmr vb3 matte black you guys think it's good idea?

[bmw325i]

Originally Posted by ThaPaki

Lookin at 20s for my 2011 e92 coupe. Vmr vb3 matte black you guys think it's good idea?

You should look at forged wheels if you are going to do 20's. Otherwise you'll be replacing them soon.

[Atomicteal_M3]

Originally Posted by bmw325i

You should look at forged wheels if you are going to do 20's. Otherwise you'll be replacing them soon.

Out of curiousity, why would he be replacing soon?

[bmw325i]

Originally Posted by BLKLYZ

Out of curiousity, why would he be replacing soon?

Cheap rims bend easily. I have 19's, they are low pressure cast, and I have a few bends. With 20's you have even less tire to protect the rim.

[TeinBMW]

He's got a point. Why not do 19s. 20s might be a stiff ride if you don't have proper suspension.

[ThaPaki]

Originally Posted by TeinBMW

He's got a point. Why not do 19s. 20s might be a stiff ride if you don't have proper suspension.

Well I saw a good deal for 20s instead of the 19s so I was like why not get 20s?

[bmw325i]

Originally Posted by TeinBMW

He's got a point. Why not do 19s. 20s might be a stiff ride if you don't have proper suspension.

I'm not saying not to do it, but I would look for some better quality wheels. Also going up a profile will help. You could use 235/35/20 and 265/30/20 which is taller than stock. The speedometer will actually be a little more accurate since its off by 3 mph from the factory.