E90Post
 


Extreme Powerhouse
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > BMW Coding > Pre-LCI E90 Bi-xenon flash to pass



Reply
 
Thread Tools Search this Thread
      05-15-2012, 02:19 PM   #1
VTECaddict
Where'd my VTEC go?
VTECaddict's Avatar
United_States
479
Rep
6,067
Posts

Drives: 06 330i 6MT
Join Date: Mar 2009
Location: Seattle, WA

iTrader: (4)

Pre-LCI E90 Bi-xenon flash to pass

Just messing around with coding and trying to do bi-xenon flash to pass.

I have FRM and set the following

BI_XENON_BEI_LH
aktiv

It works now with the low beams on, but when the low beams are off it will not fire the HIDs.

Anyone know how to make it fire the HIDs when flashing to pass without the low beams on?
__________________
AW/Terra | ZSP | ZPP | ZCW | iDrive | CA
Mods: BC BR coilovers | Blacklines | M-tech rear | dual exhaust | M3 steering wheel | BMW SSK | ZHP shift knob | High-kick CF spoiler | NBT Retrofit
M3 front control arms | M3 rear guide rods | Manzo rear toe and camber links | Monroe rear shock mounts | Varrstoen ES1 19x9.5+20 Front, 19x11+25 rear
Appreciate 0
      05-15-2012, 07:08 PM   #2
BOBKUR
Major
20
Rep
1,361
Posts

Drives: 2008 E 90
Join Date: Mar 2012
Location: CALIFORNIA

iTrader: (2)

I would think it would take time to get xenons to fire up from cold start.
Appreciate 0
      05-15-2012, 09:13 PM   #3
VTECaddict
Where'd my VTEC go?
VTECaddict's Avatar
United_States
479
Rep
6,067
Posts

Drives: 06 330i 6MT
Join Date: Mar 2009
Location: Seattle, WA

iTrader: (4)

They don't fire at all. Did this at night.
__________________
AW/Terra | ZSP | ZPP | ZCW | iDrive | CA
Mods: BC BR coilovers | Blacklines | M-tech rear | dual exhaust | M3 steering wheel | BMW SSK | ZHP shift knob | High-kick CF spoiler | NBT Retrofit
M3 front control arms | M3 rear guide rods | Manzo rear toe and camber links | Monroe rear shock mounts | Varrstoen ES1 19x9.5+20 Front, 19x11+25 rear
Appreciate 0
      05-16-2012, 07:19 AM   #4
Surly73
Lieutenant Colonel
Canada
525
Rep
1,868
Posts

Drives: '11 535xi 8AT KWv3 MPE MHD xHP
Join Date: May 2012
Location: Oakville, Ontario

iTrader: (1)

Quote:
Originally Posted by VTECaddict View Post
They don't fire at all. Did this at night.
His point is that if they aren't already on, they aren't going to fire fast enough to be used for "flashing". It might even dramatically reduce the life of the ballasts etc....
Appreciate 0
      05-16-2012, 03:54 PM   #5
VTECaddict
Where'd my VTEC go?
VTECaddict's Avatar
United_States
479
Rep
6,067
Posts

Drives: 06 330i 6MT
Join Date: Mar 2009
Location: Seattle, WA

iTrader: (4)

They fire instantaneously. Even before fully warming up xenons will be brighter than halogens.

And all E92/E93 and E90 LCI xenon work this way.
__________________
AW/Terra | ZSP | ZPP | ZCW | iDrive | CA
Mods: BC BR coilovers | Blacklines | M-tech rear | dual exhaust | M3 steering wheel | BMW SSK | ZHP shift knob | High-kick CF spoiler | NBT Retrofit
M3 front control arms | M3 rear guide rods | Manzo rear toe and camber links | Monroe rear shock mounts | Varrstoen ES1 19x9.5+20 Front, 19x11+25 rear
Appreciate 0
      05-16-2012, 05:41 PM   #6
Surly73
Lieutenant Colonel
Canada
525
Rep
1,868
Posts

Drives: '11 535xi 8AT KWv3 MPE MHD xHP
Join Date: May 2012
Location: Oakville, Ontario

iTrader: (1)

Quote:
Originally Posted by VTECaddict View Post
They fire instantaneously. Even before fully warming up xenons will be brighter than halogens.

And all E92/E93 and E90 LCI xenon work this way.
Based on what I see when I turn my headlights on I certainly wouldn't call it "instant" by any stretch.

And, again, the "ignition" phase of xenon lights is likely to be stressful to the all of the components involved.

It's your car, I guess....
Appreciate 0
      05-16-2012, 06:41 PM   #7
Dziqsek_
Banned
Poland
37
Rep
412
Posts

Drives: e91 320d
Join Date: Feb 2012
Location: Jelenia Gora ( Lower Silesia )

iTrader: (0)

You are actually wrong sir^^

For example LCI non AHL xenons sisnt have high beam as normal h7 bulb but only xenon , just like 911, Audi A4 and many others, new ballasts are prepared po bliknking with xenon without problem. I have lci xenons blink very often to friends or just to beware people of cop patrol and not a problem at all...
Appreciate 0
      05-27-2012, 09:46 AM   #8
Really?!
New Member
0
Rep
4
Posts

Drives: 08 E90 N52
Join Date: May 2012
Location: Orlando

iTrader: (0)

If look closely at a LCI vehicle or just about any other newer vehicle that has xenons the low beam, high beam, and flash to pass use the same projector. How is this done?

The LCI vehicles have a shutter built into the projector for the low beam. So the bulb intensity will not change, it is like pulling a shade up on a window to allow more light to pass thru. The xenon without the shutter would not give you the same high beam intensity right away. The shutter can actually be heard if you are right next to the lamp. The fast acting shutter is what makes this possible. The bulb is on at it brightest but the respective module reigns the brightness in with the use of the shutter (aka window shade)
So without having the shutter mechanism built into the lamp you are not going to get the same results. So even coding is not really a solution without replacing the lamp assembly for a LCI lamp assembly and then coding. Hope this sheds some light.
Appreciate 0
      05-27-2012, 06:19 PM   #9
Surly73
Lieutenant Colonel
Canada
525
Rep
1,868
Posts

Drives: '11 535xi 8AT KWv3 MPE MHD xHP
Join Date: May 2012
Location: Oakville, Ontario

iTrader: (1)

Quote:
Originally Posted by *******_ View Post
You are actually wrong sir^^

For example LCI non AHL xenons sisnt have high beam as normal h7 bulb but only xenon , just like 911, Audi A4 and many others, new ballasts are prepared po bliknking with xenon without problem. I have lci xenons blink very often to friends or just to beware people of cop patrol and not a problem at all...
Quote:
Originally Posted by Really?! View Post
If look closely at a LCI vehicle or just about any other newer vehicle that has xenons the low beam, high beam, and flash to pass use the same projector. How is this done?

The LCI vehicles have a shutter built into the projector for the low beam. So the bulb intensity will not change, it is like pulling a shade up on a window to allow more light to pass thru. The xenon without the shutter would not give you the same high beam intensity right away. The shutter can actually be heard if you are right next to the lamp. The fast acting shutter is what makes this possible. The bulb is on at it brightest but the respective module reigns the brightness in with the use of the shutter (aka window shade)
So without having the shutter mechanism built into the lamp you are not going to get the same results. So even coding is not really a solution without replacing the lamp assembly for a LCI lamp assembly and then coding. Hope this sheds some light.
I have a pre-LCI E90 and it has bi-Xenons. It has the shutter, and uses Xenon for low and high beam. It also uses the halogens in the assembly at half-brightness for DRLs.

If the headlights (i.e. Xenon low beams) are off, it will flash the halogen DRLs at full intensity if you pull the stock. If the xenon low beams are on, it will still flash the halogens if you pull the stock. If you push the stock, then it will flip the metal shutter in the Xenons to open up the full beam for high beams.

If the headlights are on, this is where you can code the car to use the shutters for flash-to-pass instead of using the halogens.

If the headlights are NOT already on (which is the case I've been discussing) you would have the fire the Xenons from dead cold and off in order to "flash to pass" using Xenons in the daytime.

I think this is bad for the ballasts, bulbs, and won't work all that well because xenons don't illuminate fully right away. When I turn on my low beams there's not that much light for the first second. Then it spends the next 3-4 seconds turning from blue to white and it's finally up to full brightness after a full 5-10 count from turning them on.

It's my personal opinion (yes, it's just personal opinion) that using xenon "flash to pass" when the xenon lights are not already on is stupid, cosmetic at best, not all that effective, and likely hard on the equipment. Feel free to pay to replace those ballasts and bulbs early just to look 0.01% "cooler".... Xenon "flash to pass" when the xenons are already on (which is BMW's factory operation when coded for this) is not any harder on the ballasts and lamps, will be effective (because the Xenon bulbs are already fired) and is just a case of user preference or possibly law in some jurisdictions.

Just to see how well it works, why not just crank your headlight control knob from off to low beam to off to low beam a couple of times per second to simulate a quick "flash to pass" double flash and see how well the Xenons respond to that. This might tell you why BMW didn't allow the car to do that from the factory.
Appreciate 0
      05-27-2012, 10:22 PM   #10
VTECaddict
Where'd my VTEC go?
VTECaddict's Avatar
United_States
479
Rep
6,067
Posts

Drives: 06 330i 6MT
Join Date: Mar 2009
Location: Seattle, WA

iTrader: (4)

You're completely ignoring the fact that E92/E93/E90LCI/E91LCI with xenons all fire the xenon from "dead cold" for flash to pass. This is straight from the factory and how BMW intended it. What do you have to say about that?

I never said I wanted to do it to "look cool". I just wanted to know if it was possible.
__________________
AW/Terra | ZSP | ZPP | ZCW | iDrive | CA
Mods: BC BR coilovers | Blacklines | M-tech rear | dual exhaust | M3 steering wheel | BMW SSK | ZHP shift knob | High-kick CF spoiler | NBT Retrofit
M3 front control arms | M3 rear guide rods | Manzo rear toe and camber links | Monroe rear shock mounts | Varrstoen ES1 19x9.5+20 Front, 19x11+25 rear
Appreciate 0
      05-28-2012, 01:46 AM   #11
charles.soori
Second Lieutenant
Canada
23
Rep
265
Posts

Drives: 2016 F85 x5m
Join Date: Apr 2011
Location: Ottawa,Ontario

iTrader: (2)

I think you need frm2 and up. I have frm2 with lci lights and after coding I could flash without the lights on. And they do fire up fast..
Appreciate 0
      05-28-2012, 10:53 AM   #12
Surly73
Lieutenant Colonel
Canada
525
Rep
1,868
Posts

Drives: '11 535xi 8AT KWv3 MPE MHD xHP
Join Date: May 2012
Location: Oakville, Ontario

iTrader: (1)

Quote:
Originally Posted by VTECaddict View Post
You're completely ignoring the fact that E92/E93/E90LCI/E91LCI with xenons all fire the xenon from "dead cold" for flash to pass. This is straight from the factory and how BMW intended it. What do you have to say about that?

I never said I wanted to do it to "look cool". I just wanted to know if it was possible.
Around 5-10 minutes with google brought me to a couple of posts where people share casually that LCI xenons seem to fire up faster than pre-LCI. This different design or new capability might be key to whether they can be used for "flash to pass" from off. I haven't found anything official on possible LCI design changes yet.

Are the inner lights in LCI assemblies "cornering lights" then, and the AEs to DRL?
Appreciate 0
      06-19-2012, 07:27 AM   #13
Surly73
Lieutenant Colonel
Canada
525
Rep
1,868
Posts

Drives: '11 535xi 8AT KWv3 MPE MHD xHP
Join Date: May 2012
Location: Oakville, Ontario

iTrader: (1)

I happened to spend a bunch of time driving a 2011 F10 535i recently which has Xenon flash to pass. I spent half a minute playing with the feature and the lights in general. Yes, it's not an E90 but I bet there are more similarities than differences when compared to LCI E90 flash-to-pass.

The ballast seems completely different. The flash-to-pass ignites WAY different than my pre-LCI E90 and even differently than simply turning on the headlights on the F10. The flash is really intense, instant, and a different colour than a standard HID ignition.

I can only conclude a couple of things:

- the parts involved are significantly different if the vehicle is equipped for Xenon flash-to-pass from off

- flash to pass appears like it may be quite hard on the equipment even when designed to use it
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 02:46 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST