[Jonny550]

Just a couple questions about wiring my DO kit to the car.

I was wondering if i could splice the wire in the cig lighter and power the pump that way or just tap a fuse?

Plus should i install a couple inline fuses into the main power line of the pump?.




Thanks for all the help guys,Jon

[Jeff@TopGearSolutions]

I did 50 amp fuse under hood (red) to meth switch, to pump.

[scalbert]

DO?

I understand a methanol pump but DO? In my world, DO is disolved oxygen.

[Jonny550]

Originally Posted by scalbert

DO?

I understand a methanol pump but DO? In my world, DO is disolved oxygen.

Devils own methanol injection

[Jonny550]

Originally Posted by JPSlick

I did 50 amp fuse under hood (red) to meth switch, to pump.

isnt that fuse always on, I need something for key on power.

[scalbert]

Originally Posted by Jon335iFL

Devils own methanol injection

And would it have taken too much of your time to type it out for clarity?

As for powering a pump, take a direct line and fuse it. Better safe than sorry.

[Jeff@TopGearSolutions]

Originally Posted by Jon335iFL

isnt that fuse always on, I need something for key on power.

I think it goes to sleep when the ecu goes to sleep. However, the pump is only on when you see boost. So its not on till you actually get in boost. So technically its never on until the car is started and going 8-10 PSI (whatever setting you have).

Regardless, Ive been doing it seamlessly for 1.5 Years, not trying to reinvent the wheel here.

Clap135 runs it the same way last I checked too. I mean there are wrong ways, and there are some good ways, and there are some hard ways, you decide which road you want to take.

[Jonny550]

Originally Posted by JPSlick

I think it goes to sleep when the ecu goes to sleep.

Regardless, Ive been doing it seamlessly for 1.5 Years, not trying to reinvent the wheel here.

Clap135 runs it the same way last I checked too. I mean there are wrong ways, and there are some good ways, and there are some hard ways, you decide which road you want to take.

did you use a tap a fuse or just wrapped the wire around the prong and stuck the fuse back in?

[Jeff@TopGearSolutions]

Originally Posted by Jon335iFL

did you use a tap a fuse or just wrapped the wire around the prong and stuck the fuse back in?

See edit, you respond way too fast, I cant even do my ninja edits.

I did it the ghetto rigged way... Wrapped wire.

[Jeff@TopGearSolutions]

[Clap135]

You can use the battery post for power in the engine bay.
Jp has it a little backwards.
Pump to battery ground
Pump positive to boost switch
Boost switch to battery post (battery post screws into firewall/fender, very easy access, just pop off the plastic cover) Whatever fuse came with your kit goes between the boost switch and the battery post.

[Jonny550]

Fug it no failsafe for me

[cn555ic]

Originally Posted by Jon335iFL

Fug it no failsafe for me

Wow really after reading about failsafes and then you decide not to install one! Bad idea man

[Jonny550]

Originally Posted by cn555ic

Wow really after reading about failsafes and then you decide not to install one! Bad idea man

i just cant get it straight with failsafes and the Jb3, Why cant the Labonte failsafe work on the Jb3 is becuase it cant read if their is a overflow so if that happens i cant do anything about it.


Or give $400 for a CMGS and FS when i could have gave $160 if i had a procede.


I rather not run one.

[cn555ic]

Originally Posted by Jon335iFL

i just cant get it straight with failsafes and the Jb3, Why cant the Labonte failsafe work on the Jb3 is becuase it cant read if their is a overflow so if that happens i cant do anything about it.


Or give $400 for a CMGS and FS when i could have gave $160 if i had a procede.


I rather not run one.

500( plus trade in of your JB3 tune for a Procede) +160 Lebonte failsafe= 660
400= just CMGS and FS



for 260~ bucks more you can have it all! A Procede and a lebonte failsafe meth system with progressive meth mapping

[Jonny550]

Originally Posted by cn555ic

500( plus trade in of your JB3 tune for a Procede) +160 Lebonte failsafe= 660
400= just CMGS and FS



for 260~ bucks more you can have it all! A Procede and a lebonte failsafe meth system with progressive meth mapping

What u mean trade in my Jb3? like sell it then buy a procede because as far as i know vishnu only offers a dicount to you they dont want your Jb3.

[Jeff@TopGearSolutions]

Originally Posted by Clap135

You can use the battery post for power in the engine bay.
Jp has it a little backwards.
Pump to battery ground
Pump positive to boost switch
Boost switch to battery post (battery post screws into firewall/fender, very easy access, just pop off the plastic cover) Whatever fuse came with your kit goes between the boost switch and the battery post.

More or less same, just different power source.

Originally Posted by cn555ic

Wow really after reading about failsafes and then you decide not to install one! Bad idea man

I agree, anyone moving forward with meth should look into failsafes.