E90Post
 


TNT Racewerks
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > All-Wheel-Drive (Xi / xDrive) Talk > What coilovers are you running?



Reply
 
Thread Tools Search this Thread
      04-19-2012, 03:46 PM   #1
deezofchuck
Lieutenant
19
Rep
511
Posts

Drives: OVER SLOW LEFT LANE DRIVERS!
Join Date: Apr 2011
Location: NOVA

iTrader: (3)

What coilovers are you running?

Hey guys - Have have been reading up on coilovers vs. springs/shocks and have decided to go with coilovers for my e92 335xi... I have pretty much narrowed down the search to the H&R street performance set. I have heard mixed reviews for the KW V1s and the V3 are just too overkill for what I want.

Can people chime in and post what coilovers you are running now and how you like them real quick?

I know there are a lot of threads but MOST of them are from years ago....and I don't want to spend $2k for some TCK's....

thanks!
Appreciate 0
      04-19-2012, 04:13 PM   #2
LionOfGosforth
Private First Class
2
Rep
180
Posts

Drives: 2009 335xi coupe
Join Date: Feb 2011
Location: Connecticut

iTrader: (3)

A lot depends on needs and budget. I went with the HPA SA Koni coilovers a few weeks back with swift springs. Other than not being able to lower the car quite as much as I thought (went down about 1-1.25in), i'm pretty happy overall. The improvement in aesthetics but more importantly the handling, has been huge over stock. I could have gone a little cheaper with KWv1's (run around 1250-1300 ish) or went with slightly higher end (AST's run around 2000-2100) but made this choice. They run in the $1500 range. If you're interested at all, hit up Harold at HP Autowerks, guy is awesome.
__________________
09 BSM E92 335xi||Black Dakota||Dark Glacier Aluminum Trim
313 Perf. Wheels||LUX H8's
Appreciate 0
      04-19-2012, 04:48 PM   #3
deezofchuck
Lieutenant
19
Rep
511
Posts

Drives: OVER SLOW LEFT LANE DRIVERS!
Join Date: Apr 2011
Location: NOVA

iTrader: (3)

Quote:
Originally Posted by LionOfGosforth View Post
A lot depends on needs and budget. I went with the HPA SA Koni coilovers a few weeks back with swift springs. Other than not being able to lower the car quite as much as I thought (went down about 1-1.25in), i'm pretty happy overall. The improvement in aesthetics but more importantly the handling, has been huge over stock. I could have gone a little cheaper with KWv1's (run around 1250-1300 ish) or went with slightly higher end (AST's run around 2000-2100) but made this choice. They run in the $1500 range. If you're interested at all, hit up Harold at HP Autowerks, guy is awesome.
sweet - thanks for the review - but the main reason i wanted coilovers was the adjust ability and you are saying you still can't lower the car as much as you would want? I guess I better double check the lowering rates for the front and rears - but most seem to have a range of 1-3" on both ends...

I know coilovers cost a little more than springs/shocks, but I think it's worth it esp if you are even thinking of tracking
Appreciate 0
      04-19-2012, 05:27 PM   #4
LionOfGosforth
Private First Class
2
Rep
180
Posts

Drives: 2009 335xi coupe
Join Date: Feb 2011
Location: Connecticut

iTrader: (3)

They are height adjustable, but the xi's have reduced travel with shorter struts (due to accommodating the front half shafts as i've learned), they don't go as low as I figured they would, certainly not "slammed" if that's what you're looking for. That said, the drop is fine with me, like I said, around 1.25in and more importantly, hugely reduced body roll and much much flatter through the corners. The handling characteristics outweigh the surprise at only being able to lower 1-1.25 inch safely. You CAN go lower (probably around 2in to it's lowest) but I wouldn't recommend it...I tried that but with virtually no compression travel and hitting those bumpstops, I was encouraged to raise it ASAP!

Edit to add...I will post up a couple of pics to give you an idea.
__________________
09 BSM E92 335xi||Black Dakota||Dark Glacier Aluminum Trim
313 Perf. Wheels||LUX H8's
Appreciate 0
      04-19-2012, 05:34 PM   #5
LionOfGosforth
Private First Class
2
Rep
180
Posts

Drives: 2009 335xi coupe
Join Date: Feb 2011
Location: Connecticut

iTrader: (3)

Here are a couple of pics:

Before
Attached Images
  
__________________
09 BSM E92 335xi||Black Dakota||Dark Glacier Aluminum Trim
313 Perf. Wheels||LUX H8's
Appreciate 0
      04-19-2012, 05:35 PM   #6
LionOfGosforth
Private First Class
2
Rep
180
Posts

Drives: 2009 335xi coupe
Join Date: Feb 2011
Location: Connecticut

iTrader: (3)

And after (sorry they're a little large)

Keep in mind, i'm running oem 18in wheels and pretty mild offsets etc, nothing very aggressive. I think it looks a lot better and handles 100% better, some might not be thrilled with the drop. I'm personally ok with it.
Attached Images
  
__________________
09 BSM E92 335xi||Black Dakota||Dark Glacier Aluminum Trim
313 Perf. Wheels||LUX H8's
Appreciate 0
      04-19-2012, 06:42 PM   #7
wanlong
First Lieutenant
Canada
15
Rep
356
Posts

Drives: 2011 e92 lci
Join Date: Mar 2010
Location: GTA

iTrader: (7)

I am think of going with HPA SA Koni coilovers + swift too, but I was excepting more drop than this
Appreciate 0
      04-19-2012, 06:55 PM   #8
LionOfGosforth
Private First Class
2
Rep
180
Posts

Drives: 2009 335xi coupe
Join Date: Feb 2011
Location: Connecticut

iTrader: (3)

My drop is a little on the conservative side perhaps but that's partly because the height of the car afterwards was not as high a priority as improving the handling. I did experiment and went as low as I could to try it out but I found that when lowered fully in the front, compression travel was an issue and not worth the jarring ride. I decided to sacrifice some aesthetics for practicality, especially since this is my DD. Honestly, I was appalled at the stock suspension, horribly floaty, the car would dive nastily under braking and be completely unsettled by any bump and gave no confidence whatsoever. This is a massive change for the better.

I have heard reliably that you can go lower on the xi with KW's and AST's (and maybe with the tc kline's) but haven't the experience of them first-hand to verify this. If you're looking seriously at this kit, i'd recommend speaking with Harold first, he will answer all questions.

Edit - i'm talking about the front lowering possibilities in my posts, the rear had no issues and could go MUCH lower if needed as it's almost at it's highest right now. Could probably go down another 3 inches in the rear if I wanted to.
__________________
09 BSM E92 335xi||Black Dakota||Dark Glacier Aluminum Trim
313 Perf. Wheels||LUX H8's

Last edited by LionOfGosforth; 04-19-2012 at 07:14 PM..
Appreciate 0
      04-20-2012, 10:22 AM   #9
wanlong
First Lieutenant
Canada
15
Rep
356
Posts

Drives: 2011 e92 lci
Join Date: Mar 2010
Location: GTA

iTrader: (7)

my priority is to improve the horrible handling of xi suspension, and then drop as much as I can. but in fact I won't drop that much since the bad road in Toronto. I am going with HPA Koni coilovers with swift anyways since this is the only one with swift spring on xi within my budget.
Appreciate 0
      04-20-2012, 10:43 AM   #10
Doyle
Hellafunctional
36
Rep
426
Posts

Drives: 335xi
Join Date: Nov 2010
Location: N/A

iTrader: (2)

The TCK kit come with a 7" front spring. I changed mine out for a 6" in order to fit 275s up front. This also allows you to drop the front a little bit further. I didn't because, well, look under my name <--- lol. I prefer ride quality/performance over having a hard parker. That said, I still scrape over speedbumps every so often.

I'll take some pics later this afternoon. I'm a little lower than lion.
__________________
Go: Cobb S2+, Big Tom FMIC, CP-E DP & DCI, Royal Muffler, AR OC
Turn: TC Kline/Swift SA, Vorshlag Plates, UUC Front Bar, H&R M3 Rear Bar, VAC endlinks & spacers, Forgeline 18x9.5/NT05 265 Square
Stop: Endless MX72, Stoptech Rotors/Lines, Motul RBF600
Appreciate 0
      04-20-2012, 11:26 AM   #11
LionOfGosforth
Private First Class
2
Rep
180
Posts

Drives: 2009 335xi coupe
Join Date: Feb 2011
Location: Connecticut

iTrader: (3)

^
Thanks for the input Doyle, I know you posted a quality review of the TC Klines a little while back. Curious, when playing with ride height on the tc klines, did you ever experience much bumpstop collision with that kit? I found that the height I have it at right now (about 0.75in above it's lowest setting) provides a decent lowering without being too jarring. Previously, I experienced a big issue with being too low, no matter how carefully I drove, compression travel was a big issue until I raised it to it's current height.
__________________
09 BSM E92 335xi||Black Dakota||Dark Glacier Aluminum Trim
313 Perf. Wheels||LUX H8's

Last edited by LionOfGosforth; 04-20-2012 at 11:39 AM..
Appreciate 0
      04-20-2012, 11:42 AM   #12
Doyle
Hellafunctional
36
Rep
426
Posts

Drives: 335xi
Join Date: Nov 2010
Location: N/A

iTrader: (2)

Not really. With the 7" spring I had 2 threads left until the lower perch ran out of adjustment (check out my review thread for pictures). I made contact with the bumpstops maybe 2-3 times. With the 6" springs I haven't bottomed out at all.

I'm running a pretty stiff spring up front (450#) as well as MUCH lighter wheel (<19# for 18x9.5), though. My shop was adamant about not putting anything lower than 450# up front. I suspect this is the reason (lots of weight to control, and little compression travel).
__________________
Go: Cobb S2+, Big Tom FMIC, CP-E DP & DCI, Royal Muffler, AR OC
Turn: TC Kline/Swift SA, Vorshlag Plates, UUC Front Bar, H&R M3 Rear Bar, VAC endlinks & spacers, Forgeline 18x9.5/NT05 265 Square
Stop: Endless MX72, Stoptech Rotors/Lines, Motul RBF600
Appreciate 0
      04-20-2012, 11:48 AM   #13
LionOfGosforth
Private First Class
2
Rep
180
Posts

Drives: 2009 335xi coupe
Join Date: Feb 2011
Location: Connecticut

iTrader: (3)

Thanks...beginning to think a higher spring rate might have been a good idea. I went with 300 front and 600 rear, thinking a little extra compliance daily would be beneficial, perhaps should have gone a little stiffer in the front. You live and learn.
__________________
09 BSM E92 335xi||Black Dakota||Dark Glacier Aluminum Trim
313 Perf. Wheels||LUX H8's
Appreciate 0
      04-20-2012, 12:13 PM   #14
Doyle
Hellafunctional
36
Rep
426
Posts

Drives: 335xi
Join Date: Nov 2010
Location: N/A

iTrader: (2)

Yeah, I wouldn't worry about it too much. Aside from a few crazies that sweat stance/ride height/whatever, most people will think your car looks sharp.

If you get some extra money, then maybe throw on 450/800 swifts. Until then, enjoy your ride! Its a BMW!
__________________
Go: Cobb S2+, Big Tom FMIC, CP-E DP & DCI, Royal Muffler, AR OC
Turn: TC Kline/Swift SA, Vorshlag Plates, UUC Front Bar, H&R M3 Rear Bar, VAC endlinks & spacers, Forgeline 18x9.5/NT05 265 Square
Stop: Endless MX72, Stoptech Rotors/Lines, Motul RBF600
Appreciate 0
      04-20-2012, 12:32 PM   #15
LionOfGosforth
Private First Class
2
Rep
180
Posts

Drives: 2009 335xi coupe
Join Date: Feb 2011
Location: Connecticut

iTrader: (3)

Haha, you're right and I know i'm being a little too much of a worrier here. Once I get the rear adjustment completely correct (a little bouncy currently), i'm sure i'll be 100% happy. Glad I got the externally adjustable dampers now. The car handles much better than before and subjectively, looks a lot better too. Thanks for the input again, appreciated.
__________________
09 BSM E92 335xi||Black Dakota||Dark Glacier Aluminum Trim
313 Perf. Wheels||LUX H8's
Appreciate 0
      04-20-2012, 12:57 PM   #16
wanlong
First Lieutenant
Canada
15
Rep
356
Posts

Drives: 2011 e92 lci
Join Date: Mar 2010
Location: GTA

iTrader: (7)

I think the single adjustment shocks can not handle springs higher than 700 if I don't change m3 bushing?

Last edited by wanlong; 04-20-2012 at 01:21 PM..
Appreciate 0
      04-20-2012, 01:00 PM   #17
EyeGuy
Second Lieutenant
165
Rep
247
Posts

Drives: 08 335xi coupe, 17 nx200t, 23
Join Date: Apr 2011
Location: NY -> Fl

iTrader: (2)

Thinking about going with the koni and swifts myself. Hows the ride quality compared to stock?? The ride height doesnt bother me much. must be getting old.
Appreciate 0
      04-20-2012, 01:18 PM   #18
LionOfGosforth
Private First Class
2
Rep
180
Posts

Drives: 2009 335xi coupe
Join Date: Feb 2011
Location: Connecticut

iTrader: (3)

Quote:
Originally Posted by wanlong View Post
I think the single adjustment shocks can only handle springs higher than 700 if I don't change m3 bushing?
336f and 672r are the recommended rates, if you go much beyond that, you'll likely see the limitations of the stock bushings magnify.
__________________
09 BSM E92 335xi||Black Dakota||Dark Glacier Aluminum Trim
313 Perf. Wheels||LUX H8's
Appreciate 0
      04-20-2012, 01:20 PM   #19
LionOfGosforth
Private First Class
2
Rep
180
Posts

Drives: 2009 335xi coupe
Join Date: Feb 2011
Location: Connecticut

iTrader: (3)

Quote:
Originally Posted by EyeGuy View Post
Thinking about going with the koni and swifts myself. Hows the ride quality compared to stock?? The ride height doesnt bother me much. must be getting old.
IMHO, the ride quality is very good. You definitely feel the road more but the car is so much more planted and flat through the corners. Lean and roll is greatly reduced too and steering feel and precision is improved also.
__________________
09 BSM E92 335xi||Black Dakota||Dark Glacier Aluminum Trim
313 Perf. Wheels||LUX H8's
Appreciate 0
      04-20-2012, 01:23 PM   #20
wanlong
First Lieutenant
Canada
15
Rep
356
Posts

Drives: 2011 e92 lci
Join Date: Mar 2010
Location: GTA

iTrader: (7)

Quote:
Originally Posted by LionOfGosforth View Post
336f and 672r are the recommended rates, if you go much beyond that, you'll likely see the limitations of the stock bushings magnify.
I meat the rear can not handle higher then 700 if I dont change to m3 bushing
Appreciate 0
      04-20-2012, 01:27 PM   #21
LionOfGosforth
Private First Class
2
Rep
180
Posts

Drives: 2009 335xi coupe
Join Date: Feb 2011
Location: Connecticut

iTrader: (3)

Quote:
Originally Posted by wanlong View Post
I meat the rear can not handle higher then 700 if I dont change to m3 bushing
I think the stock rates in the rear are like 350-ish (might be wrong there) so the higher you go, the worse the stock bushings will perform. I'd like to have done the m3 bushings myself but the labor costs involved are prohibitive.
__________________
09 BSM E92 335xi||Black Dakota||Dark Glacier Aluminum Trim
313 Perf. Wheels||LUX H8's
Appreciate 0
      04-20-2012, 02:38 PM   #22
Eracer76
First Lieutenant
Eracer76's Avatar
United_States
62
Rep
370
Posts

Drives: 2009 E89 Z4 35i
Join Date: Nov 2011
Location: IL

iTrader: (5)

Im very happy with my KW V1's... The improvement over stock is huge!
There is a lot less body roll in the turns, the nose dive under braking is almost nonexistent and it's definitely planted on bumpy roads & turns now
I like how easy they are to adjust too... I first started out with a subtle drop, but I have since lowered the front and rear another 1/4" and even though I lowered it more from the original install, the ride quality hasn't changed at all.


Here are some pics of the drop before I lowered it a 1/4" more... There is much more adjustability left too, but I can't lower the rear anymore, because the tires already slightly rub if I have the kids in the back seat and I hit a big bump/dip in the road... I guess I should roll the fenders



__________________
2009 Z4 35i 6mt, SpeedTech 6266 Gen2 turbo kit, Tial WG, VRSF 7.5 race IC, ER charge pipe, Tial BOV, Radium Fuel cell w/ surge tank and twin Walbro 525 pumps, Radium FPR and return line, Bluetooth ethanol sensor, Phoenix intake manifold w/PI, JB4 tuner, PR coil packs, Custom oil cooler, ECS Radiator, Spec 3+clutch, Mfactory flywheel, single 3.5" into dual 3" exhaust, H&R springs, 19" TSW wheels, 235/19 & 275/19 RE11 tires

Last edited by Eracer76; 04-20-2012 at 02:43 PM..
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:45 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST