|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
help identifying a missing hose or cap in engine bay
|
|
05-29-2014, 11:28 AM | #1 |
First Lieutenant
17
Rep 329
Posts |
help identifying a missing hose or cap in engine bay
Left side of engine block if facing the car. Two open nozzles which appear that they should have a hose or cap like the other photos.
My dad has an 08 n54 and he has what looks like caps. First one without anything is my 07. Second one with the boxed cap is my dad's 08. Mine is an 07. Last edited by RIDERDIE; 05-29-2014 at 11:34 AM.. |
05-29-2014, 11:48 AM | #2 |
nsomneeak
38
Rep 501
Posts |
Those are your boost solenoids, and you can't buy the cap separately.
http://www.ecstuning.com/BMW-E90-335...ost/ES2498186/
__________________
RB Turbos w/ N20 TMAP Sensor | 93 Octane Protune by Cobb Plano | xHP Stage 3 | BMS DCI | STETT CP | Forge DVs | RB PCV | Helix FMIC | CP-E Catted DPs | Walbro 450 | Bilstein B12 | M3 Control Arms | Defiv Lockdown Kit | BBS CH | Michelin A/S 3+ Hixson BMW of Monroe, LA - Shady Dealer | |
Appreciate
0
|
05-29-2014, 01:05 PM | #3 |
First Lieutenant
17
Rep 329
Posts |
Thanks George,
Any explanation as why they are not there? Is that just a cap, if so I can't just improvise. I have been getting a 30ff just from normal driving, maybe this is the culprit. |
Appreciate
0
|
05-29-2014, 01:54 PM | #4 | |
nsomneeak
38
Rep 501
Posts |
Quote:
I have a couple old solenoids at home; I can see if they will come off, then go back on. If so, you can have them.
__________________
RB Turbos w/ N20 TMAP Sensor | 93 Octane Protune by Cobb Plano | xHP Stage 3 | BMS DCI | STETT CP | Forge DVs | RB PCV | Helix FMIC | CP-E Catted DPs | Walbro 450 | Bilstein B12 | M3 Control Arms | Defiv Lockdown Kit | BBS CH | Michelin A/S 3+ Hixson BMW of Monroe, LA - Shady Dealer | |
|
Appreciate
0
|
05-29-2014, 07:07 PM | #7 | |
nsomneeak
38
Rep 501
Posts |
Quote:
This is the part you're missing Under the cap it's just a screen, a filter I guess. After inspecting it, and not having much luck releasing what looked like tabs, I just pried right here, and it came off intact with a little effort. Leaving us with this. I put the cap back on the screen part and it fit snugly when I put it over the nipple again,though I didn't press it all the way down, as it seemed like it would snap back into place...so I think you'll be fine with these. Just send me a PM with your address.
__________________
RB Turbos w/ N20 TMAP Sensor | 93 Octane Protune by Cobb Plano | xHP Stage 3 | BMS DCI | STETT CP | Forge DVs | RB PCV | Helix FMIC | CP-E Catted DPs | Walbro 450 | Bilstein B12 | M3 Control Arms | Defiv Lockdown Kit | BBS CH | Michelin A/S 3+ Hixson BMW of Monroe, LA - Shady Dealer | |
|
Appreciate
1
|
05-30-2014, 07:37 AM | #8 | |
Captain
482
Rep 681
Posts |
Quote:
|
|
Appreciate
0
|
05-30-2014, 01:50 PM | #11 |
I even mod my cereal
240
Rep 3,435
Posts
Drives: 11 ZCP DCT M3 14 328d 21 GT4
Join Date: Aug 2009
Location: Northern Va
|
nice work George!
__________________
2011 Mineral White M3 ZCP - Opticoat, Ventureshield, some CF, B&B exhaust, AFE Intake Vorsteiner VFF 101s Ohlins
2014 Mineral White 328d Xdrive Wagon - Opticoat, Ventureshield, B8s, H&R, Apex SM-10s Hawk Pads 2021 718 Cayman GT4 - Fire extinguiser |
Appreciate
0
|
05-30-2014, 07:09 PM | #12 |
nsomneeak
38
Rep 501
Posts |
Just trying to help out; I definitely wasn't using them. =)
These will be in the mail tomorrow, Rider.
__________________
RB Turbos w/ N20 TMAP Sensor | 93 Octane Protune by Cobb Plano | xHP Stage 3 | BMS DCI | STETT CP | Forge DVs | RB PCV | Helix FMIC | CP-E Catted DPs | Walbro 450 | Bilstein B12 | M3 Control Arms | Defiv Lockdown Kit | BBS CH | Michelin A/S 3+ Hixson BMW of Monroe, LA - Shady Dealer | |
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|