|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
N54 Turbo clamps discontinued by BMW
|
|
03-05-2013, 01:26 PM | #1 |
Private First Class
9
Rep 136
Posts |
N54 Turbo clamps discontinued by BMW
I'm not sure if any of you have experienced this problem, but hopefully you can give me some advice. Last week, I had BMS catless downpipes installed in my E90 335i. During the install, one of the clamps that holds the downpipe to the turbo broke. The shop was able to weld it back together and reinstall it on the turbo. I ordered a replacement set of clamps from bmwpartspro.com (Steve Thomas BMW) and I got an email saying that BMW is blocking the order of this part since it has been deemed defective.
There is no ETA of when the manufacturer will be replacing this part. I have another order out with Tischer BMW, that I hope will be able to be fulfilled. But, if all of these parts are ordered directly from BMW, I think it will get blocked again. Do you guys think a well welded turbo clamp will be okay or are there any other options I have? I have the part diagram attached, it is the part marked #5. Any advice would be greatly appreciated. |
03-05-2013, 01:42 PM | #3 |
Private First Class
9
Rep 136
Posts |
|
Appreciate
0
|
03-05-2013, 02:20 PM | #4 |
Lieutenant
31
Rep 439
Posts |
I've had a welded clamp for the past year, all is good
__________________
2011 335is "Redrkt" 6 MT
DocRace 6266 Single Turbo - Fuel it stage 3 LPFP - Fuel it PI - spec stage 3+ clutch - mfactory SM flywheel - 100% E85 - VRSF 7.5" intercooler - VRSF charge pipe w/ HKS BOV - JB4 - MHD back end flash 768 whp 695 ft lbs - E85 - 32PSI |
Appreciate
0
|
Bookmarks |
|
|