[BradZditosky]

After a lot of research online and comparing different angel eye bulbs I decided to go with the 20W CREE Bulbs, and for the price, $65 on Ebay since I had 25 ebay bucks, i could not be happier. The right eye was an upgraded bulb from factory, a PIAA Xtreme White Plus bulb, so it is a little bit brighter then the factory bulbs to begin with. I would definitely recommend these to any who wants to spend under $100 for new angel eye bulbs.

Here are two quick photos I took, ill try to take more soon.

[jkliu]

What product did you use for white corners?

[Tetustus]

At night they all look nice, but when they get into the sun ...

[BradZditosky]

Originally Posted by autumnsunrise

What product did you use for white corners?

These are the exact ones I bought, they are error free.

http://www.ebay.com/itm/370623918255...84.m1497.l2649

Originally Posted by Tetustus

At night they all look nice, but when they get into the sun ...

Even during they day they are a lot whiter and look great, in my opinion, especailly for the price.

[DetectiveLoki]

Originally Posted by BradZditosky

These are the exact ones I bought, they are error free.

http://www.ebay.com/itm/370623918255...84.m1497.l2649

I've been wanting to make my corner light white. I guess I'll get these instead of coding it.

[Vesar]

They look really nice i think

[BradZditosky]

Originally Posted by DetectiveLoki

I've been wanting to make my corner light white. I guess I'll get these instead of coding it.

Yeah, they are cheap, look good and pretty easy to install. There is a little orange LED in the conner that stays on even after I changed the bulb. I found out that there is not a way to replace or remove this bulb, but I was able to disable the led by cutting the wire that supplied power to it, on the wiring harness that runs into the headlight assembly. I did not get any error codes by doing this and it makes it look much better.

[Rmk392]

Do your turn signals blink at normal speed? Did you have to install resistors?

[DetectiveLoki]

Originally Posted by BradZditosky

Yeah, they are cheap, look good and pretty easy to install. There is a little orange LED in the conner that stays on even after I changed the bulb. I found out that there is not a way to replace or remove this bulb, but I was able to disable the led by cutting the wire that supplied power to it, on the wiring harness that runs into the headlight assembly. I did not get any error codes by doing this and it makes it look much better.

So when you use your blinker to signal, it'll blink white?

[BradZditosky]

Originally Posted by Rmk392

Do your turn signals blink at normal speed? Did you have to install resistors?

yes they blink at normal speed and no i did not have to use resistors.

Originally Posted by DetectiveLoki

So when you use your blinker to signal, it'll blink white?

the orange led is just turned off, the turn signal bulb is what i replaced with the bulb i posted the ebay link for. so in other words yes it will blink white

[gazorp]

Are these the ones you bought? http://cgi.ebay.com/ws/eBayISAPI.dll...m=170902934986

[BradZditosky]

Originally Posted by gazorp

Are these the ones you bought? http://cgi.ebay.com/ws/eBayISAPI.dll...m=170902934986

nope, these

http://www.ebay.com/itm/271057687876...84.m1423.l2649

[gazorp]

Oh well, those are only compatible with LCI it seems. I am thinking of trying the ones i linked though. Any opinion?

[BradZditosky]

Originally Posted by gazorp

Oh well, those are only compatible with LCI it seems. I am thinking of trying the ones i linked though. Any opinion?

I am not sure, i would just open up your headlight assembly and make sure it looks like it would fit, if it looks like the right bulb i would try it, CREE is just a type of led so hopefully you would get the same results as i did.

[07e92]

day time shot would be great, at night time, any of those look bright.

[BradZditosky]

Originally Posted by 07e92

day time shot would be great, at night time, any of those look bright.

ill get one up soon

[DetectiveLoki]

did you get any day shot photo? I bought the signal bulbs, but waiting to install them on my e93.

[BradZditosky]

Originally Posted by DetectiveLoki

did you get any day shot photo? I bought the signal bulbs, but waiting to install them on my e93.

Hey sorry I havent got one up yet, ill try and get one tomorrow if its nice out.

[eriktufa]

The link that you provided is 160 bucks plus ship?

[BradZditosky]

Originally Posted by eriktufa

The link that you provided is 160 bucks plus ship?

I believe he raises his price when he gets low on stock, he did that once before and then once he got more in the price went back down. I paid $89.49

[LuxAngelEyes]

Take a look at our findings of this bulb here: http://www.e90post.com/forums/showpo...4&postcount=52 you might be surprised by what you find.

[BradZditosky]

Originally Posted by LuxAngelEyes

Take a look at our findings of this bulb here: http://www.e90post.com/forums/showpo...4&postcount=52 you might be surprised by what you find.

I would have gone LUX, but when I got these off eBay for $60, since I have ebay bucks, I just could not justify paying 4 times more for the LUX. What are the chances of, any of these things you say could happen, happening? I read many reviews and none that I have read said they have had any problems with them. As for brightness, I have seen some comparisons between these and the LUX Angel Eyes and to me the LUX bulbs dont look that much brighter. It could be different if you actually saw them in comparison. One day I will save up some money and get the LUX Angels Eyes because everyone really likes them, I just didn't have the money and couldn't pass up trying these out since I got them for $60 and for the price i am really happen with them.