[Zubz335]

Hey guys, I have a 2009 e90 lci, my right hand side angel eye is no longer coming on after i attempted to change the oem bulb to the clear, not sure if something shorted out but i put the oem bulb back and it still refuses to come on, left hand side works fine.
I tried resetting the short circuit counter using tool32 but when I read the status_lampen_kurzschluss_counter, in the results window all are = 0 except,
stat_begrl_rechts_short_circuit_counter = 60 - 00 3C . <

I then tried clearing using steurn_reset_kurzschlussabschaltung with "data" box check results read error_lamp_nr
If I uncheck "data" it says error selected light
Tried using reset_kurzschluss_sperre with checked "data" i get error_lamp_nr
If I uncheck "data" it says OKAY but angel eye still won't come on.
When I read status_lampen_kurzschluss_counter, it still has'nt changed

I do not know german so this is quite challenging to undersand, i would think that the above error is with regard to the right angel eye, does anyone know how to clear/reset this or know what it is?


Thanks

[cn555ic]

What arguments did you use?

For begrl_rechts you need to use "0x05"

[Zubz335]

Originally Posted by cn555ic

What arguments did you use?

For begrl_rechts you need to use "0x05"

Thanks for reply cn555ic
In arguments I have "LAMPNR; 0x5E"

[Zubz335]

Got it, I tried just " 0x05" instead of "LAMPNR; 0x5E in arguments and it worked, thanks alot bud

[cn555ic]

No problem man. Glad u got it working!

[cryptomit]

Steven, do you know why I can't reset short circuit on BEGRL_RECHTS

apiJobData("FRM_70","status_lampen_kurzschluss_cou nter",{DATA}, 2,"stat_begrl_rechts_short_circuit_counter")
{DATA}: 2 Bytes
0000 : 00 03 ..

Satz : 0
OBJECT = frm_70
SAETZE = 1
JOBNAME = status_lampen_kurzschluss_counter
VARIANTE = FRM_70
JOBSTATUS =
UBATTCURRENT = -1
UBATTHISTORY = -1
IGNITIONCURRENT = -1
IGNITIONHISTORY = -1
Satz : 1
JOB_STATUS = OKAY
STAT_BEGRL_RECHTS_SHORT_CIRCUIT_COUNTER = 14 00 0E ..


When I put 0x05 I get this:

apiJobData("FRM_70","steuern_reset_kurzschlussabsc haltung",{DATA}, 2,"")
{DATA}: 2 Bytes
0000 : 00 05 ..

Satz : 0
OBJECT = frm_70
SAETZE = 1
JOBNAME = steuern_reset_kurzschlussabschaltung
VARIANTE = FRM_70
JOBSTATUS =
UBATTCURRENT = -1
UBATTHISTORY = -1
IGNITIONCURRENT = -1
IGNITIONHISTORY = -1
Satz : 1
JOB_STATUS = ERROR_LAMP_NR
_TEL_ANTWORT = 64 Bytes
0000 : BC F1 72 5A 80 00 00 09 24 05 30 07 32 0E 60 56 ¼ñrZ?... $.0.2.`V
0010 : 45 20 11 01 12 09 00 13 09 0D 14 01 04 14 00 00 E ...... ........
0020 : 00 00 00 00 09 20 62 44 00 05 53 05 30 30 39 32 ..... bD ..S.0092
0030 : 45 47 30 30 30 39 32 45 47 30 46 31 39 30 41 9B EG00092E G0F190A?

[Zubz335]

Did you try with "data" checked?

[cryptomit]

Yes I did, and still the same.

[cn555ic]

Originally Posted by cryptomit

Steven, do you know why I can't reset short circuit on BEGRL_RECHTS

apiJobData("FRM_70","status_lampen_kurzschluss_cou nter",{DATA}, 2,"stat_begrl_rechts_short_circuit_counter")
{DATA}: 2 Bytes
0000 : 00 03 ..

Satz : 0
OBJECT = frm_70
SAETZE = 1
JOBNAME = status_lampen_kurzschluss_counter
VARIANTE = FRM_70
JOBSTATUS =
UBATTCURRENT = -1
UBATTHISTORY = -1
IGNITIONCURRENT = -1
IGNITIONHISTORY = -1
Satz : 1
JOB_STATUS = OKAY
STAT_BEGRL_RECHTS_SHORT_CIRCUIT_COUNTER = 14 00 0E ..


When I put 0x05 I get this:

apiJobData("FRM_70","steuern_reset_kurzschlussabsc haltung",{DATA}, 2,"")
{DATA}: 2 Bytes
0000 : 00 05 ..

Satz : 0
OBJECT = frm_70
SAETZE = 1
JOBNAME = steuern_reset_kurzschlussabschaltung
VARIANTE = FRM_70
JOBSTATUS =
UBATTCURRENT = -1
UBATTHISTORY = -1
IGNITIONCURRENT = -1
IGNITIONHISTORY = -1
Satz : 1
JOB_STATUS = ERROR_LAMP_NR
_TEL_ANTWORT = 64 Bytes
0000 : BC F1 72 5A 80 00 00 09 24 05 30 07 32 0E 60 56 ¼ñrZ?... $.0.2.`V
0010 : 45 20 11 01 12 09 00 13 09 0D 14 01 04 14 00 00 E ...... ........
0020 : 00 00 00 00 09 20 62 44 00 05 53 05 30 30 39 32 ..... bD ..S.0092
0030 : 45 47 30 30 30 39 32 45 47 30 46 31 39 30 41 9B EG00092E G0F190A?

Not sure it should work...Most of the short circuits I have reset worked, keep trying and make sure the Tools32 is working properly

[flip]

Did you ever figure this out? I'm having the same issue and am very stuck...

[fazman]

Originally Posted by flip

Did you ever figure this out? I'm having the same issue and am very stuck...

my driver side AE has failed and has a counter of 50. i have tried to use the following arguements with no success (STAT_BEGRL...):
0
0x04

[fazman]

Yeay, i got my AE's working... not gonna give any more update other then that

just kidding. Okay here is what i did:
1) Make sure i'm on map 0
2) Load INPA and make sure i have both black dots so i know my cable works
3) Close INPA (very important to do this)
4) launch TOOL32.EXE
5) click on "jobs" and start typing out: steuern_reset_kurzshlussabschaltung
6) click on the text box located under arguements and enter the various hex values (you will need to try both check marked and unchecked for the box that says DATA). Press F5 or double click on the job name to send each command one by one
a) arguement = 0x0 (received error result)
b) 0x1 (received error result)
c) 0x2 (received error result)
d) 0x3 (received error result)
e) 0x4 (received error result)
f) 0x5 (received error result)
g) 0x6 (received error result)
h) 0x7 (received error result)
i) 0x8 (received error result)
j) 0x9 (received error result)
k) 0xa (received error result)
l) 0xb (Got my first OKAY, and started to jump up and down with joy)
7) went back to the job for reading the counter and instead of showing 50... it was now 1
8) closed TOOL32.EXE and open INPA
9) cleared all errors in the FRM
10) start my car and enjoyed seeing my driver side AE alive again