E90Post
 


TNT Racewerks
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > Low pressure fuel psi reading 0?



Reply
 
Thread Tools Search this Thread
      10-25-2023, 12:32 AM   #1
Zachl04
Registered
0
Rep
1
Posts

Drives: Bmw 335xi
Join Date: Oct 2023
Location: Pennsylvania

iTrader: (0)

Low pressure fuel psi reading 0?

Hi, have had a 335xi for a couple months and from the beginning had code “29F3 - DME : fuel low pressure sensor, electric”, since then I have replaced both low pressure fuel pump and low pressure fuel sensor and code has yet to go away.
After replacing low pressure fuel sensor, the data logs are reading the psi as 0 however the car is running fine, help??

data log
https://datazap.me/u/zachl04/log-169...og=0&data=3-22

Last edited by Zachl04; 10-25-2023 at 12:38 AM..
Appreciate 0
      10-25-2023, 01:07 PM   #2
SlowE92
First Lieutenant
112
Rep
347
Posts

Drives: E92 2007 335i, E60 2008 535xi
Join Date: Sep 2023
Location: Salt Lake

iTrader: (0)

Quote:
Originally Posted by Zachl04 View Post
Hi, have had a 335xi for a couple months and from the beginning had code “29F3 - DME : fuel low pressure sensor, electric”, since then I have replaced both low pressure fuel pump and low pressure fuel sensor and code has yet to go away.
After replacing low pressure fuel sensor, the data logs are reading the psi as 0 however the car is running fine, help??

data log
https://datazap.me/u/zachl04/log-169...og=0&data=3-22
Possibly a faulty low pressure fuel sensor. It's located on the fuel rail.
__________________
2007 E92 335i - MHD, Turbo Technics 19T's
2008 E60 535XI - JB4
2010 E92 335i - JB4, Borg Warner EFR 8374
Appreciate 0
      10-25-2023, 01:17 PM   #3
SlowE92
First Lieutenant
112
Rep
347
Posts

Drives: E92 2007 335i, E60 2008 535xi
Join Date: Sep 2023
Location: Salt Lake

iTrader: (0)

Quote:
Originally Posted by Zachl04 View Post
Hi, have had a 335xi for a couple months and from the beginning had code “29F3 - DME : fuel low pressure sensor, electric”, since then I have replaced both low pressure fuel pump and low pressure fuel sensor and code has yet to go away.
After replacing low pressure fuel sensor, the data logs are reading the psi as 0 however the car is running fine, help??

data log
https://datazap.me/u/zachl04/log-169...og=0&data=3-22
Your stft look odd while cruising as well.
__________________
2007 E92 335i - MHD, Turbo Technics 19T's
2008 E60 535XI - JB4
2010 E92 335i - JB4, Borg Warner EFR 8374
Appreciate 0
      10-25-2023, 03:18 PM   #4
lowrydr310
Robot
1576
Rep
2,117
Posts

Drives: 2006 330i, 2007 E93 335i
Join Date: Apr 2013
Location: Souhtrne Califniora

iTrader: (0)

Quote:
Originally Posted by MakoB96 View Post
Possibly a faulty low pressure fuel sensor. It's located on the fuel rail.
He said he already replaced the sensor and the LP fuel pump, but you're right, still sounds like a faulty sensor or maybe even connector.

Zachl04, what sensor did you end up using? I just went through some low side fuel pressure issues and a new sensor fixed it, though I used the upgraded sensor and adapter from FCP.

Did you ensure the sensor was connected properly? There's a very short wire where one end connects to the sensor and the other end plugs into the distribution block underneath the throttle body. I'd suggest inspecting that wire; test for continuity, check that the wires aren't broken and that the pins are in the connector, and check that it's properly plugged into the sensor and the distribution block.
Appreciate 1
SlowE92112.00
      10-25-2023, 03:26 PM   #5
SlowE92
First Lieutenant
112
Rep
347
Posts

Drives: E92 2007 335i, E60 2008 535xi
Join Date: Sep 2023
Location: Salt Lake

iTrader: (0)

Quote:
Originally Posted by lowrydr310 View Post
He said he already replaced the sensor and the LP fuel pump, but you're right, still sounds like a faulty sensor or maybe even connector.

Zachl04, what sensor did you end up using? I just went through some low side fuel pressure issues and a new sensor fixed it, though I used the upgraded sensor and adapter from FCP.

Did you ensure the sensor was connected properly? There's a very short wire where one end connects to the sensor and the other end plugs into the distribution block underneath the throttle body. I'd suggest inspecting that wire; test for continuity, check that the wires aren't broken and that the pins are in the connector, and check that it's properly plugged into the sensor and the distribution block.
I misread that part, I thought he only changed the lpfp. I'm having a hard time reading the log as well, but it looks like partial throttle his soft term fuel trims jump and he starts to run lean based on his AFR
__________________
2007 E92 335i - MHD, Turbo Technics 19T's
2008 E60 535XI - JB4
2010 E92 335i - JB4, Borg Warner EFR 8374
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:20 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST