[335iJWC]

My wiring seems fine, Comand 7/5 works i just dont get flow at wot.

ill stop by terrys next week to get it figured out.

you cant compare their support!!

[woodga16]

just look at your picture and it's different than mine. I have my solenoid about an inch after my pump and not much more line going after solenoid to meth bung...yours has a lot longer lines. I like the way you have yours setup. I'll take a picture and put it up so you can see. So the solenoid will make a ''click'' sound when it is operating properly?

[sA x sKy]

Originally Posted by 335iJWC

My wiring seems fine, Comand 7/5 works i just dont get flow at wot.

ill stop by terrys next week to get it figured out.

you cant compare their support!!

You're so lucky you're local..

[LuSt4Boost]

Aye Jeff, where did you get those black meth hoses?

[Jeff@TopGearSolutions]

Originally Posted by woodga16

just look at your picture and it's different than mine. I have my solenoid about an inch after my pump and not much more line going after solenoid to meth bung...yours has a lot longer lines. I like the way you have yours setup. I'll take a picture and put it up so you can see. So the solenoid will make a ''click'' sound when it is operating properly?

Short line are nice but you want to make sure everything fits properly too. No sharp bends, and you want the lines fitting in true and straight. Clean cuts of the line are very important they must be 99% vertical.
If I wanted to splurge for 90 degree fittings I could likely make everything shorter.

Yes solenoids click, just like relays. I believe its a magnet that opens exceptionally fast, open/close.

Originally Posted by LuSt4Boost

Aye Jeff, where did you get those black meth hoses?

We are authorized dealer of devils own and coolingmist.
The black lines are from devils own. It is available by the foot, on my site.

I have clear lines to the pump so I know if there is air in the lines. (which I never do btw). Black is the rest.