Avant Garde fitment advice/feedback

user01011 · 06-12-2014, 05:38 PM

Hi all.

Was wondering if anybody could assist with some fitment advice and general feedback around a set of wheels before I commit to buying. These would need to be shipped internationally, so I want to be sure they will fit correctly and look decent before committing as it's not exactly easy to do a return if they don't.

I have a 2010 E90 335i M-Sport and I'm looking at the following wheels from Avant Garde.

FRONT: 20x8.5 5x120 ET30 72.6CB
REAR: 20x10 5x120 ET38 72.6CB

In terms of size and offset, will these fit? Are the widths and offsets aggressive enough to fill the guards without needing spacers, but not so wide I don't need to trim/roll guards to fit?

I don't have coilovers at the moment, but will be looking at buying some in the near future. I'd want to make sure these would fit even when the standard M-sport suspension was replaced.

Thanks in advance for any replies.

bmw325i · 06-13-2014, 01:27 AM

The front would need a 10mm spacer to be flush. The rear is just about flush, might need a fender roll. For tires you can use 235/30/20 and 275/25/20.

06-12-2014, 05:38 PM	#1
user01011 New Member 0 Rep 8 Posts Drives: '10 E90 335i Join Date: Feb 2014 Location: New Zealand iTrader: (0)	Avant Garde fitment advice/feedback Hi all. Was wondering if anybody could assist with some fitment advice and general feedback around a set of wheels before I commit to buying. These would need to be shipped internationally, so I want to be sure they will fit correctly and look decent before committing as it's not exactly easy to do a return if they don't. I have a 2010 E90 335i M-Sport and I'm looking at the following wheels from Avant Garde. FRONT: 20x8.5 5x120 ET30 72.6CB REAR: 20x10 5x120 ET38 72.6CB In terms of size and offset, will these fit? Are the widths and offsets aggressive enough to fill the guards without needing spacers, but not so wide I don't need to trim/roll guards to fit? I don't have coilovers at the moment, but will be looking at buying some in the near future. I'd want to make sure these would fit even when the standard M-sport suspension was replaced. Thanks in advance for any replies.
	Appreciate 0 Tweet Quote

06-13-2014, 01:27 AM	#2
bmw325i Major General 223 Rep 5,120 Posts Drives: 2006 BMW 325i Join Date: Oct 2010 Location: United States iTrader: (8)	The front would need a 10mm spacer to be flush. The rear is just about flush, might need a fender roll. For tires you can use 235/30/20 and 275/25/20.
	Appreciate 0 Quote