Sponsored by The Tire Rack

[diegopiedra]

Hey guys, so i am thinking about getting a set of apex wheels off of a fellow member. I have an e92 prelci. Was just wondering if i would rub with these sizes.

18x9.5 ET 22 front
18x10.5 ET 27 rear

I am not lowered and do not have a sport suspension. I am currently running a
19x9.5 et 35 front
19x10.5 et 30 rear and i do not rub at all no matter how hard i turn a corner. What do u guys think? Rub or no rub?

[Riick]

I'm not a betting man, but if I were.. I'd go all in that ET22 will rub. Oh, and it will also look mexi-flush.

[diegopiedra]

Originally Posted by Riick

I'm not a betting man, but if I were.. I'd go all in that ET22 will rub. Oh, and it will also look mexi-flush.

U think it'll poke out?

[bmw325i]

Originally Posted by diegopiedra

Hey guys, so i am thinking about getting a set of apex wheels off of a fellow member. I have an e92 prelci. Was just wondering if i would rub with these sizes.

18x9.5 ET 22 front
18x10.5 ET 27 rear

I am not lowered and do not have a sport suspension. I am currently running a
19x9.5 et 35 front
19x10.5 et 30 rear and i do not rub at all no matter how hard i turn a corner. What do u guys think? Rub or no rub?

With a 225 or 235 up front your good.

[diegopiedra]

Originally Posted by bmw325i

With a 225 or 235 up front your good.

Its a 265

[bmw325i]

Originally Posted by diegopiedra

Its a 265

Not going to fit with a 265.

Here is an e92 with similar specs.
http://www.e90post.com/forums/showthread.php?t=837414

[diegopiedra]

Yea he's lowered tho and im not, i dont have a problem rolling my fenders either haha

[bmw325i]

Originally Posted by diegopiedra

Yea he's lowered tho and im not, i dont have a problem rolling my fenders either haha

Yes but 265 will not stretch at all on a 9.5. Your going to break your fenders for sure with a 265.

[diegopiedra]

Originally Posted by bmw325i

Yes but 265 will not stretch at all on a 9.5. Your going to break your fenders for sure with a 265.

Not even if i do -1 camber? Or get a 255 tire?

[bmw325i]

Originally Posted by diegopiedra

Not even if i do -1 camber? Or get a 255 tire?

Look at the link I showed you. He is at -1 camber and the front pokes out about 5-6mm you need some stretch or the tire is going to stick out past the fender.

[diegopiedra]

Hes offset is a little more aggressive

[diegopiedra]

Originally Posted by bmw325i

Look at the link I showed you. He is at -1 camber and the front pokes out about 5-6mm you need some stretch or the tire is going to stick out past the fender.

His offset is a little bit more aggressive

[bmw325i]

Originally Posted by diegopiedra

His offset is a little bit more aggressive

His offset is 2mm lower your wanting to use a tire that is over an inch wider. You MIGHT be able to use a 245.

[diegopiedra]

Originally Posted by bmw325i

His offset is 2mm lower your wanting to use a tire that is over an inch wider. You MIGHT be able to use a 245.

Alright i will test fit them if not ill run a 245

[Game]

No chance 265/255 works up front. 245 won't be easy with that width and offset.

[diegopiedra]

Originally Posted by Game

No chance 265/255 works up front. 245 won't be easy with that width and offset.

Not even with -1 camber?

[bmw325i]

Originally Posted by diegopiedra

Not even with -1 camber?

Maybe with closer to -3 camber lol.

[MonacoBlueE90]

Originally Posted by diegopiedra

i dont have a problem rolling my fenders either haha

Except your front fenders are plastic, so you can't roll those.

Originally Posted by diegopiedra

Not even with -1 camber?

You need that to pretty much with 9.5 et22 and 225 or 235 wide tyre. here is one with 18x9.5 et22, 235/40/18 and 18x10.5 et20, 265/35/18 http://www.e90post.com/forums/showthread.php?t=894864 Like bmw325i mentioned you need

Originally Posted by bmw325i

Maybe with closer to -3 camber lol.

I know one E90 with 18x9.5 et30 and 265/35/18 it had -3 camber and yes you would need aftermarket camber plates to get there.