Sponsored by The Tire Rack

[M3AndyP]

First post !!!!
I have a 2011 E92 M3.

Just picked up a set of F14 SDC 19x10 et20 (all 4) and want to stagger the tires. (couldn't wait the 8 weeks for 9.5in et25 fr and 11in et23 rr which seem to be the perfect set up from my research)

I landed on a 285/30/19 for the rear. (Sounds like I could go up to a 295 but that is right at the edge of a 10in wheel and might rub slightly).

I want to do a 255/35/19 front but can't find anyone that has actually done it on the 19x10 et20 SDC F14. Everything indicates it should work. (various calculators, specs that a 255 is the min width for a 10in wheel ect), but i'd love to have first hand proof and hopefully pics before buying the tires.

Will it look too stretched ? Will it rub ?

I'd like to go with the most sidewall I can on a 19 wheel because I'm in Ct and the roads suck. (Ya I know I could have gone 18 but I wanted 19's).
And the 255/35, 285/30 is the GTS setup so I'd like to go with that.

If I can't confirm the 255/35 will work I'll go 265/30 or 275/30. (probably 275 to get the most sidewall.)

Other info: Going with Hankook V12's and will be lowered on H&R Sports.

Andy

[MonacoBlueE90]

You will have better luck asking this at m3 forum http://www.m3post.com/forums/forumdisplay.php?f=119, but i found this http://www.e90post.com/forums/showthread.php?t=1153737