E92 coupe Offset information - Everyone with aftermarket rims plz chime in !!!!!!!!!!

Fugly M3 · 05-18-2010, 10:32 PM

thanks for that, now I can get some m3 rims

NS_Z4 · 05-19-2010, 12:54 PM

Edit...found my answer

mikeokimster · 05-19-2010, 03:31 PM

Current setup: Alufelgen SF-71 235x19x8.5|265x19x9.5 ET35mm on all corners wrapped in Conti DW dropped on PSS10's with -2.1 deg of camber in the rear.

I am getting the fenders rolled later this week to be able to run 12mm rear spacers. Will have before & after pics.

Fugly M3 · 05-19-2010, 03:52 PM

what size tires?

Blue Liquid · 05-19-2010, 08:11 PM

Quote:

Originally Posted by E46M54325Ci

what size tires?

Yes, thank you. This information is key...

Robmaster · 05-23-2010, 03:51 AM

my setup now:

front: 19x8.5 ET20 225/35/19
rear: 19x9.5 ET20 255/30/19

no problem at the front, but the rear still rub on bumps. rear fenders are rolled a bit.

Got Rice? · 06-07-2010, 11:34 PM

Front 19x9 +20 with 235/35/19
Rear 19x11 +33 with 255/35/19 or 265/35/19

im looking to pull and roll my rear fender, will this work?

Robmaster · 06-08-2010, 01:09 AM

Quote:

Originally Posted by Got Rice?

Front 19x9 +20 with 235/35/19
Rear 19x11 +33 with 255/35/19 or 265/35/19

im looking to pull and roll my rear fender, will this work?

front: you need a lot negativ camber. without that, it never works!

rear! roll and pull your fender like hell, negativ camber. with this mods, it could fit, but not for sure.

CubanJJ09 · 06-08-2010, 04:24 AM

Figure i'd add to this thread just in case someone was looking. I have a e92 stock sports sus.
Advan rs fronts 19x8.5 et32 with 245/35/19 good year f1 asy. Sometimes rubs lock to lock. Rears 19x9.5 et35 with 275/30/19 gdyrf1 asy. May rub in extreme cases (alot of weight in the rear over a bump)
but other than that its fine. Only had for about a week so haven't been in all
situations yet

dgbuilder · 06-08-2010, 04:25 PM

Quote:

Originally Posted by CubanJJ09

Figure i'd add to this thread just in case someone was looking. I have a e92 stock sports sus.
Advan rs fronts 19x8.5 et32 with 245/35/19 good year f1 asy. Sometimes rubs lock to lock. Rears 19x9.5 et35 with 275/30/19 gdyrf1 asy. May rub in extreme cases (alot of weight in the rear over a bump)
but other than that its fine. Only had for about a week so haven't been in all
situations yet

CubanJJ - Nice choice on the Advans!! Love that look on e92!! I am about ready to make that move myself. Do you think you could fit wider tires up front, say 255 or 265 with your current setup? Also, I am considering H&R sport springs and new shocks, do you think there is room for the minimal drop they would provide? Thanks in advance. DG.

Also, where in IL are you?

Blue Liquid · 06-08-2010, 06:48 PM

@ dgbuilder, I'm running the Advans in 18x8.5 ET32 front, 18x9.5 ET35 rear, with 245 up front and 275 rear. If I ran a 255 or wider, I'd be rubbing during full steering lock (or perhaps not even full lock!). Right now it just barely clears. If I were to hit any sort of bump it would rub while turning at full lock. As it is, the rears rub over some heavier bumps. The slightest fender roll would alleviate this, however.

1ForAll · 06-09-2010, 07:56 AM

Wanting to run a square et20 9.5 setup. If I run a 235 in the fronts and a 245 in the rear, will this work?

CubanJJ09 · 06-09-2010, 08:29 AM

Quote:

Originally Posted by dgbuilder

CubanJJ - Nice choice on the Advans!! Love that look on e92!! I am about ready to make that move myself. Do you think you could fit wider tires up front, say 255 or 265 with your current setup? Also, I am considering H&R sport springs and new shocks, do you think there is room for the minimal drop they would provide? Thanks in advance. DG.

Also, where in IL are you?

its odd, i only rub on the passenger front well when im reversing out and the steering wheels turned all the way to the left. after having this setup 255 would be pushing it on stock sus. but i wouldnt give it a go if your gonna lower unless u have the financial means to fix it if it doesnt work out. im in the burbs u coming to the wsto meet? i can show u my setup there and u can make your own decision.

CubanJJ09 · 06-09-2010, 08:30 AM

Quote:

Originally Posted by Blue Liquid

@ dgbuilder, I'm running the Advans in 18x8.5 ET32 front, 18x9.5 ET35 rear, with 245 up front and 275 rear. If I ran a 255 or wider, I'd be rubbing during full steering lock (or perhaps not even full lock!). Right now it just barely clears. If I were to hit any sort of bump it would rub while turning at full lock. As it is, the rears rub over some heavier bumps. The slightest fender roll would alleviate this, however.

u lowered at all? mine doesnt rub at all and ive tried to make it rub. maybe i need to haul ass faster down my driveway

Blue Liquid · 06-09-2010, 09:48 AM

No, not lowered, I'm on stock Sport Suspension. However, Monday I'm having the Performance suspension installed, so at that point it may be another story! I really attribute my current fender rubbing with the tire brand, the Toyo R888.

CubanJJ09 · 06-09-2010, 10:05 AM

Quote:

Originally Posted by Blue Liquid

No, not lowered, I'm on stock Sport Suspension. However, Monday I'm having the Performance suspension installed, so at that point it may be another story! I really attribute my current fender rubbing with the tire brand, the Toyo R888.

ohhh gotcha

Dustin@AEp · 06-09-2010, 04:11 PM

E93 335i:

OEM M3 wheels:

19x8.5 et29 245/35R19
19x9.5 et23 255/35R19

Doesn't rub in the rear!

Got Rice? · 06-09-2010, 11:07 PM

Quote:

Originally Posted by Dustin@AEperformance

E93 335i:

OEM M3 wheels:

19x8.5 et29 245/35R19
19x9.5 et23 255/35R19

Doesn't rub in the rear!

are you lowered?

lstoker · 06-10-2010, 09:14 AM

Latest Question... I have a good line on a set of OZ Alleggerita's, but I am concerned with the offsets. They were originally purchased for a 1 series

E92 335 Coupe
Front 18x8 ET40 225/40
Rear 18x9 ET40 255/35

Does anyone see any issues with this? Concerned about the off set on the fronts.

CubanJJ09 · 06-10-2010, 10:17 AM

should fit but theyll be tucked into the well

1ForAll · 06-10-2010, 10:20 AM

Quote:

Originally Posted by 1ForAll

Wanting to run a square et20 9.5 setup. If I run a 235 in the fronts and a 245 in the rear, will this work?

anyone?

Robmaster · 06-11-2010, 01:08 AM

Quote:

Originally Posted by 1ForAll

Wanting to run a square et20 9.5 setup. If I run a 235 in the fronts and a 245 in the rear, will this work?

i run 19x9.5 ET20 with a 255/30/19 Goodyerar Eagle F1 asym. in the rear.
my fender are slightly rolled. it still rubs over bumps. so i have to roll my fenders more.

with a smaller tire, i should possible with just a bit rolled fenders.

05-18-2010, 10:32 PM	#331
Fugly M3 Major General 5065 Rep 5,105 Posts Drives: 2023 M3CX Join Date: May 2006 Location: SoCal iTrader: (5)	thanks for that, now I can get some m3 rims
	Appreciate 0 Quote

05-19-2010, 12:54 PM	#332
NS_Z4 New Member 1 Rep 5 Posts Drives: '10 Z4 35i, '06 X5, 04 ///M3 Join Date: Apr 2010 Location: So Cal iTrader: (0)	Edit...found my answer Last edited by NS_Z4; 05-19-2010 at 01:36 PM..
	Appreciate 0 Quote

05-19-2010, 03:31 PM	#333
mikeokimster Lieutenant Colonel 205 Rep 1,699 Posts Drives: e90 jerez m3 Join Date: Sep 2005 Location: North Seattle, WA iTrader: (10)	Current setup: Alufelgen SF-71 235x19x8.5\|265x19x9.5 ET35mm on all corners wrapped in Conti DW dropped on PSS10's with -2.1 deg of camber in the rear. I am getting the fenders rolled later this week to be able to run 12mm rear spacers. Will have before & after pics. __________________ Current: 10' E90 Jerez M3 DCT ///Mods: Xpel front clip wrap, Nokya 2500k H8 halos, matte grills, IND reflectors, scoops, MS drop-in, MS track pipes, Dinan exhaust, 240E, ESS tune, BBS CHR, s04 255x35 295x30, KW Clubsports, ceramic pads Retired: 08' E92 328i JB 6mt 212 rwhp 190 rwtq Last edited by mikeokimster; 05-19-2010 at 09:57 PM..
	Appreciate 0 Quote

05-19-2010, 03:52 PM	#334
Fugly M3 Major General 5065 Rep 5,105 Posts Drives: 2023 M3CX Join Date: May 2006 Location: SoCal iTrader: (5)	what size tires?
	Appreciate 0 Quote

05-23-2010, 03:51 AM	#336
Robmaster Colonel 151 Rep 2,757 Posts Drives: 2010 E82 135, 2005 E87 130i Join Date: Apr 2007 Location: Switzerland iTrader: (3)	my setup now: front: 19x8.5 ET20 225/35/19 rear: 19x9.5 ET20 255/30/19 no problem at the front, but the rear still rub on bumps. rear fenders are rolled a bit.
	Appreciate 0 Quote

06-07-2010, 11:34 PM	#337
Got Rice? Second Lieutenant 26 Rep 263 Posts Drives: aw 335i coupe Join Date: Apr 2008 Location: Earth iTrader: (3)	Front 19x9 +20 with 235/35/19 Rear 19x11 +33 with 255/35/19 or 265/35/19 im looking to pull and roll my rear fender, will this work?
	Appreciate 0 Quote

06-08-2010, 04:24 AM	#339
CubanJJ09 Banned 169 Rep 12,680 Posts Drives: like an asshole Join Date: Feb 2008 Location: Chicago Burbs iTrader: (2) Garage List 2007 BMW 335i [6.18]	Figure i'd add to this thread just in case someone was looking. I have a e92 stock sports sus. Advan rs fronts 19x8.5 et32 with 245/35/19 good year f1 asy. Sometimes rubs lock to lock. Rears 19x9.5 et35 with 275/30/19 gdyrf1 asy. May rub in extreme cases (alot of weight in the rear over a bump) but other than that its fine. Only had for about a week so haven't been in all situations yet
	Appreciate 0 Quote

06-08-2010, 06:48 PM	#341
Blue Liquid First Lieutenant 18 Rep 363 Posts Drives: Silverstone F80 Join Date: Apr 2010 Location: NJ iTrader: (0)	@ dgbuilder, I'm running the Advans in 18x8.5 ET32 front, 18x9.5 ET35 rear, with 245 up front and 275 rear. If I ran a 255 or wider, I'd be rubbing during full steering lock (or perhaps not even full lock!). Right now it just barely clears. If I were to hit any sort of bump it would rub while turning at full lock. As it is, the rears rub over some heavier bumps. The slightest fender roll would alleviate this, however. __________________ https://www.instagram.com/gennaro_dito/ https://www.gennaroditophoto.com/
	Appreciate 0 Quote

06-09-2010, 07:56 AM	#342
1ForAll Colonel 141 Rep 2,127 Posts Drives: E92 Join Date: May 2008 Location: Orlando iTrader: (4) Garage List 2007 OSS Designs 335 [9.16] 2007 BMW 335i [9.28] 2007 BMW 335i [7.60]	Wanting to run a square et20 9.5 setup. If I run a 235 in the fronts and a 245 in the rear, will this work?
	Appreciate 0 Quote

06-09-2010, 09:48 AM	#345
Blue Liquid First Lieutenant 18 Rep 363 Posts Drives: Silverstone F80 Join Date: Apr 2010 Location: NJ iTrader: (0)	No, not lowered, I'm on stock Sport Suspension. However, Monday I'm having the Performance suspension installed, so at that point it may be another story! I really attribute my current fender rubbing with the tire brand, the Toyo R888. __________________ https://www.instagram.com/gennaro_dito/ https://www.gennaroditophoto.com/
	Appreciate 0 Quote

06-09-2010, 04:11 PM	#347
Dustin@AEp Captain 41 Rep 625 Posts Drives: BMW E92 M3 Join Date: Mar 2010 Location: Southern California iTrader: (2)	E93 335i: OEM M3 wheels: 19x8.5 et29 245/35R19 19x9.5 et23 255/35R19 Doesn't rub in the rear!
	Appreciate 0 Quote

06-10-2010, 09:14 AM	#349
lstoker Second Lieutenant 41 Rep 220 Posts Drives: '21 X5M Competition Join Date: Jun 2010 Location: Windsor, CO iTrader: (4)	Latest Question... I have a good line on a set of OZ Alleggerita's, but I am concerned with the offsets. They were originally purchased for a 1 series E92 335 Coupe Front 18x8 ET40 225/40 Rear 18x9 ET40 255/35 Does anyone see any issues with this? Concerned about the off set on the fronts. Last edited by lstoker; 06-10-2010 at 09:26 AM..
	Appreciate 0 Quote

06-10-2010, 10:17 AM	#350
CubanJJ09 Banned 169 Rep 12,680 Posts Drives: like an asshole Join Date: Feb 2008 Location: Chicago Burbs iTrader: (2) Garage List 2007 BMW 335i [6.18]	should fit but theyll be tucked into the well
	Appreciate 0 Quote