Procede v5 8-26 Maps/Firmware available!

MJR63 · 09-21-2011, 05:49 PM

I'm still experiencing hiccups under hard acceleration. Map 0 (no tune) seems fine. Any suggestions?

Pepe_pr · 09-21-2011, 06:38 PM

The car feels nice and smooth, but i dont feel any gain, maybe a bit more torque at low and mid rpms but no dramatic changes.

This weekend i will do some long runs 60-120. To see how boost holds, curious since i saw shocking's vid

ian2002525 · 09-21-2011, 07:42 PM

if the car already equipped the latest dme and still experiencing limp mode, Shiv, do u got any solution to fix it?

Slops · 09-21-2011, 08:13 PM

Hmmm I have a feeling to wait before loading any maps then. I'm ok with my current ones...

Freelo · 09-21-2011, 10:11 PM

New maps and firmware loaded fine on my car. No issues. Running map 2 on 93 octane. Only other engine mod is Vishnu charge pipe.

Have not noticed any hiccups on part throttle (had them occasionally on prior July and early August maps).

Top end over 4500 feels more powerful than last maps, but that could be due to temperature now in low 60s vs high 70s.

One thing I definitely notice is the feeling that when going from part throttle to WOT in second gear, the power curve is less smooth now between 4000 to 6500. Power kicks in a bit more suddenly in higher RPMs. I need to drive it some more to see if this is just in second gear; haven't had chance to get to high RPMs on WOT in 3rd and 4th.

GiRtHyN55 · 09-22-2011, 08:14 AM

Had a reduced power message pop on while driving normal in map 1. Car still seems fine it auto cleared itself in about 5 mins and its been off ever since yesterday

jjurroz · 09-26-2011, 02:33 PM

shiv, is the bogfix turned on for 6mt on this firmware/map ?

jjurroz · 09-27-2011, 04:04 PM

Quote:

Originally Posted by GiRtHyN55

i wasnt losing connection during the firmware upload it would upload 100% but when the procede would get suck in when it was resetting. I just uploaded the 8-8 beta firmware and maps and it looks like its running fine. I dunno what to try next

Girthy, look at this:

Quote:

Originally Posted by shiv@vishnu

The Procede not resetting is actually a bug with the new user software, not the Procede. The Procede does reset but the user software may stay offline until you disconnect/connect again. It's something that we will be addressing soon.

Slops · 10-03-2011, 01:27 PM

has there been any updates on the meth kits or any revisions to these maps as of today?

ian2002525 · 10-04-2011, 03:08 PM

Shiv, i'm running 8-26 Maps/Firmware and also have the latest DME updated and having the fuel harness. why still everytime when i try to do top speed run in 6th gear, i always get half engine light on!!! whats going to with the procede?

Slops · 10-04-2011, 04:33 PM

Quote:

Originally Posted by ian2002525

Shiv, i'm running 8-26 Maps/Firmware and also have the latest DME updated and having the fuel harness. why still everytime when i try to do top speed run in 6th gear, i always get half engine light on!!! whats going to with the procede?

Damn! Hope that gets fixed... wonder if anybody is running the meth maps yet????

ian2002525 · 10-05-2011, 12:21 AM

Quote:

Originally Posted by ian2002525

Shiv, i'm running 8-26 Maps/Firmware and also have the latest DME updated and having the fuel harness. why still everytime when i try to do top speed run in 6th gear, i always get half engine light on!!! whats going to with the procede?

Willing to give procede one last shot so i deleted the codes and reset the adoption (from12-3) then took several hard pulls for each gear. i noticed my boost is unstable. 2nd, 3rd gear hits 12psi but 4th gear jump up to 19psi or even 20..!!!? and finally SEL light came up after couple 6th pulls...the SEL was blinking once in 3sec. i never had SEL on before beside catless downpipe so i dunno whats going on with my procede now....
Anybody experience this issue before please chime in to help me!!

Slops · 10-05-2011, 05:35 AM

Quote:

Originally Posted by ian2002525

Quote:

Originally Posted by ian2002525

Shiv, i'm running 8-26 Maps/Firmware and also have the latest DME updated and having the fuel harness. why still everytime when i try to do top speed run in 6th gear, i always get half engine light on!!! whats going to with the procede?

Willing to give procede one last shot so i deleted the codes and reset the adoption (from12-3) then took several hard pulls for each gear. i noticed my boost is unstable. 2nd, 3rd gear hits 12psi but 4th gear jump up to 19psi or even 20..!!!? and finally SEL light came up after couple 6th pulls...the SEL was blinking once in 3sec. i never had SEL on before beside catless downpipe so i dunno whats going on with my procede now....
Anybody experience this issue before please chime in to help me!!

Maybe it'd be best to log these runs and let shiv look at it for advice.

FrankiE90 · 10-05-2011, 06:42 AM

Quote:

Originally Posted by ian2002525

Willing to give procede one last shot so i deleted the codes and reset the adoption (from12-3) then took several hard pulls for each gear. i noticed my boost is unstable. 2nd, 3rd gear hits 12psi but 4th gear jump up to 19psi or even 20..!!!? and finally SEL light came up after couple 6th pulls...the SEL was blinking once in 3sec. i never had SEL on before beside catless downpipe so i dunno whats going on with my procede now....
Anybody experience this issue before please chime in to help me!!

u'll need the new board rev 2.5 or 3.0 -
talk to robert bout update'n.
run map 1.
or bump down previous map 8-8
if u data log u'll see 15psi on logs where the gauge says 10-12psi.

weather's been gett'n colder - N55 is happier.
I'm waiting on new board 3.0 and meth.

ian2002525 · 10-05-2011, 10:04 AM

Quote:

Originally Posted by FrankiE90

u'll need the new board rev 2.5 or 3.0 -
talk to robert bout update'n.
run map 1.
or bump down previous map 8-8
if u data log u'll see 15psi on logs where the gauge says 10-12psi.

weather's been gett'n colder - N55 is happier.
I'm waiting on new board 3.0 and meth.

Frankie, you had this happend to you before as well?
so thats why you are getting rev 3.0?
if i downgrade to map8-8 how about firmware? also need downgrade?
so this issue is totally tune related, not my car's problem right?

GiRtHyN55 · 10-05-2011, 11:05 AM

Quote:

Originally Posted by ian2002525

Frankie, you had this happend to you before as well?
so thats why you are getting rev 3.0?
if i downgrade to map8-8 how about firmware? also need downgrade?
so this issue is totally tune related, not my car's problem right?

Its happening to me too. In the higher gears the car will boost spike to 18-19psi at bout 50% throttle and hit failsafe. I would upload the firmware that goes with the 8-8 BETA just to be on the safe side. It looks like rev2 is gonna have to upgraded....kinda sucks cause it have even been out that long for the N55 platform. Hopefully the upgrade wont be too expensive.

ian2002525 · 10-05-2011, 11:18 AM

Quote:

Originally Posted by GiRtHyN55

Its happening to me too. In the higher gears the car will boost spike to 18-19psi at bout 50% throttle and hit failsafe. I would upload the firmware that goes with the 8-8 BETA just to be on the safe side. It looks like rev2 is gonna have to upgraded....kinda sucks cause it have even been out that long for the N55 platform. Hopefully the upgrade wont be too expensive.

feel a bit comfortable now since i'm not the only one experience this issue. but i had SEL came up in blinking style. what does that mean?
i'm curious why this issue just happened to us? why not happen in the beginning? due to weather changing?

GiRtHyN55 · 10-05-2011, 01:49 PM

Quote:

Originally Posted by ian2002525

feel a bit comfortable now since i'm not the only one experience this issue. but i had SEL came up in blinking style. what does that mean?
i'm curious why this issue just happened to us? why not happen in the beginning? due to weather changing?

This is off the vishnu site :

Procede Fault List
# of SES light flashes
1= Leanrun fault
2= Overboost fault
3= Wastegate overDC fault
4= Fuel pressure fault
5= Methanol Overflow/Leak
6= VIN mismatch
7= Map/Firmware incompatibility

Slops · 10-05-2011, 02:18 PM

Quote:

Originally Posted by GiRtHyN55

This is off the vishnu site :

Procede Fault List
# of SES light flashes
1= Leanrun fault
2= Overboost fault
3= Wastegate overDC fault
4= Fuel pressure fault
5= Methanol Overflow/Leak
6= VIN mismatch
7= Map/Firmware incompatibility

damn! Thats useful! Thanks man, never knew those were even available lol

FrankiE90 · 10-05-2011, 02:27 PM

Ian -
not ur car.
just down grade to 8-8 or go map 1.

ian it's happening now because its the next phase
of maximize'n the tune - nothing to worry to much,
it's part of 1st year with the n55. i'm sure many of
us will report back with the new board and map

ian2002525 · 10-05-2011, 02:53 PM

Quote:

Originally Posted by GiRtHyN55

It looks like rev2 is gonna have to upgraded....kinda sucks cause it have even been out that long for the N55 platform. Hopefully the upgrade wont be too expensive.

Shiv should make the upgrade as a "recall" since its nothing wrong with our cars, its the product itself

ian2002525 · 10-05-2011, 02:54 PM

Quote:

Originally Posted by FrankiE90

Ian -
not ur car.
just down grade to 8-8 or go map 1.

ian it's happening now because its the next phase
of maximize'n the tune - nothing to worry to much,
it's part of 1st year with the n55. i'm sure many of
us will report back with the new board and map

thank you Frankie. i will downgrade the map/firmware tonight!

09-21-2011, 05:49 PM	#89
MJR63 Lieutenant 21 Rep 415 Posts Drives: 2011 335i X-Drive Sedan Join Date: Sep 2010 Location: Tolland, CT iTrader: (5) Garage List 2011 BMW 335i x-drvie [0.00]	I'm still experiencing hiccups under hard acceleration. Map 0 (no tune) seems fine. Any suggestions? __________________ 2011 335 X-Drive E90 MTECH 6MT • AST4100's • Vishnu 3.5" DP • Helix FMIC • Procede V5 • M3 Strut Brace • M3 Trunk Lip • LUX H8 • 19" Alufelgen SF-71: 8.5' front, 9.5' rear • Continental ExtremeContact DW Tires
	Appreciate 0 Quote

09-21-2011, 06:38 PM	#90
Pepe_pr Lieutenant 35 Rep 553 Posts Drives: 135i black on black Join Date: Sep 2010 Location: San Juan PR iTrader: (1)	The car feels nice and smooth, but i dont feel any gain, maybe a bit more torque at low and mid rpms but no dramatic changes. This weekend i will do some long runs 60-120. To see how boost holds, curious since i saw shocking's vid __________________ USED TO HAVE A 385 whp 479 tq N55 335 2011 (AT) AND NOW A 135 M package 2010 (AT) 447whp/504tq
	Appreciate 0 Quote

09-21-2011, 07:42 PM	#91
ian2002525 台灣台北市 88 Rep 1,267 Posts Drives: 2009 GT-R Premium Join Date: Jun 2010 Location: Brentwood, TN/台灣 iTrader: (6) Garage List 2011 335i coupe [9.00]	if the car already equipped the latest dme and still experiencing limp mode, Shiv, do u got any solution to fix it? __________________ Car Sold- 2011 E92 335i Msport Car Sold- 2009 Nissan GT-R tuned on E85
	Appreciate 0 Quote

09-21-2011, 08:13 PM	#92
Slops Major General 188 Rep 5,417 Posts Drives: 2005 C55 AMG Join Date: Jan 2011 Location: Oxford iTrader: (2)	Hmmm I have a feeling to wait before loading any maps then. I'm ok with my current ones...
	Appreciate 0 Quote

09-21-2011, 10:11 PM	#93
Freelo Private First Class 10 Rep 175 Posts Drives: 2014 328i (sold) Join Date: Sep 2010 Location: Los Angeles iTrader: (5)	new maps New maps and firmware loaded fine on my car. No issues. Running map 2 on 93 octane. Only other engine mod is Vishnu charge pipe. Have not noticed any hiccups on part throttle (had them occasionally on prior July and early August maps). Top end over 4500 feels more powerful than last maps, but that could be due to temperature now in low 60s vs high 70s. One thing I definitely notice is the feeling that when going from part throttle to WOT in second gear, the power curve is less smooth now between 4000 to 6500. Power kicks in a bit more suddenly in higher RPMs. I need to drive it some more to see if this is just in second gear; haven't had chance to get to high RPMs on WOT in 3rd and 4th. __________________ Koni sport shocks, BMW performance springs, M3 arms and sways front and rear, M3 subframe bushings, Velocity toe arms, M3 front strut bar, Cobb, ETS FMIC, Vishnu charge pipe, RPI scoops, M3 steering wheel, M3 carbon leather interior trim, Advan RS 18 inch wheels, Pilot sport tires
	Appreciate 0 Quote

09-22-2011, 08:14 AM	#94
GiRtHyN55 Private 4 Rep 92 Posts Drives: 2011 335xi Join Date: Dec 2010 Location: white plains, ny iTrader: (0) Garage List 2011 335 x drive [0.00]	Had a reduced power message pop on while driving normal in map 1. Car still seems fine it auto cleared itself in about 5 mins and its been off ever since yesterday __________________ 2011 Black 335 xi MT- M package- Cold weather- BMW Performance Grills-PIAA H8 yellow fogs-Procede V5-Vishnu DP 3.5 inch- CDV delete-Vishnu Charge Pipe - *Waiting on meth kit* - H&R Springs Sport Kit
	Appreciate 0 Quote

09-26-2011, 02:33 PM	#95
jjurroz Second Lieutenant 24 Rep 269 Posts Drives: 2018 F80 M3 ZCP Join Date: Sep 2010 Location: Ft. Lauderdale, FL iTrader: (0)	shiv, is the bogfix turned on for 6mt on this firmware/map ?
	Appreciate 0 Quote

10-03-2011, 01:27 PM	#97
Slops Major General 188 Rep 5,417 Posts Drives: 2005 C55 AMG Join Date: Jan 2011 Location: Oxford iTrader: (2)	has there been any updates on the meth kits or any revisions to these maps as of today?
	Appreciate 0 Quote

10-04-2011, 03:08 PM	#98
ian2002525 台灣台北市 88 Rep 1,267 Posts Drives: 2009 GT-R Premium Join Date: Jun 2010 Location: Brentwood, TN/台灣 iTrader: (6) Garage List 2011 335i coupe [9.00]	Shiv, i'm running 8-26 Maps/Firmware and also have the latest DME updated and having the fuel harness. why still everytime when i try to do top speed run in 6th gear, i always get half engine light on!!! whats going to with the procede? __________________ Car Sold- 2011 E92 335i Msport Car Sold- 2009 Nissan GT-R tuned on E85
	Appreciate 0 Quote

10-05-2011, 02:27 PM	#108
FrankiE90 Major General 654 Rep 8,801 Posts Drives: Krooked Sk8board Join Date: Feb 2008 Location: Pasadena, Ca iTrader: (11)	Ian - not ur car. just down grade to 8-8 or go map 1. ian it's happening now because its the next phase of maximize'n the tune - nothing to worry to much, it's part of 1st year with the n55. i'm sure many of us will report back with the new board and map __________________ FrankiE90 AKA:.[The TANK] *CLICK THE SIG E90s (been gone but not forgotten) • KW clubsports • • • • • • • • • • 18" BBS GT4 // Build E30 (pending) + E46 M3 Wagon ESTORIL Blue
	Appreciate 0 Quote