|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
Eror code 9CBB
|
|
12-18-2011, 07:06 PM | #1 |
Captain
69
Rep 975
Posts |
Eror code 9CBB
I have this error code on my FRM2 can someone please tell me how to fix the error?
I had a short in my HID angel eye kit and as a result, the FRM stopped supplying power to the angel eye socket so i cant get a signal to power on the kit. Can someone please tell me how to fix this error?
__________________
2009 BMW E90 328i | Xenons | MT | Space Gray | Beige-ette | CF Fabric Trim | iPod/USB | 20% Tints | Euro-Plate | Rear Fog Switch Lego Mod | Painted Reflectors | Performance Short-shift Kit | Style 197 Wheels | OEM Sport Suspension |
|
08-02-2012, 03:35 PM | #3 |
Captain
69
Rep 975
Posts |
I was able to fix this. I had to use tool32
I dont remember exact details. let me find my post from a while back
__________________
2009 BMW E90 328i | Xenons | MT | Space Gray | Beige-ette | CF Fabric Trim | iPod/USB | 20% Tints | Euro-Plate | Rear Fog Switch Lego Mod | Painted Reflectors | Performance Short-shift Kit | Style 197 Wheels | OEM Sport Suspension |
|
Appreciate
0
|
08-02-2012, 03:49 PM | #4 | ||
Captain
69
Rep 975
Posts |
READ EVERYTHING BEFORE TRYING ANYTHING
read this thread http://www.e90post.com/forums/showthread.php?t=495535 you need to have daten V41 files. Quote:
Quote:
I know when i finally figured out how to do this i hadnt had an angel eye for 6 months and i felt like
__________________
2009 BMW E90 328i | Xenons | MT | Space Gray | Beige-ette | CF Fabric Trim | iPod/USB | 20% Tints | Euro-Plate | Rear Fog Switch Lego Mod | Painted Reflectors | Performance Short-shift Kit | Style 197 Wheels | OEM Sport Suspension |
|
||
Appreciate
0
|
12-29-2013, 12:37 AM | #6 | |
Lieutenant
72
Rep 524
Posts |
Quote:
This is the second time im trying this now and for some reason i cannot figure out the lamp_nr part. I dont know what to put into the arguments area. No matter what i put, i get an error in the job status.. What were you putting in to subtract from the counter?? I also dont have the steurn reset i have _reset_kurzschluss_sperre which has the lamp_nr option and also the only "reset" available that i have listed..
__________________
2010 AW/BLK 135i VM 6465 Single Turbo, JB4 + MHD, VRSF CP & Tial, Big Tom, Fuel-It PI + Stage 3 + Return + Ethanol Sensor, BMW PE, MFactory LSD, Spec 3+ & MFactory SMFW, RB External PCV
Best stock turbo 12.5 @ 19.46 spinning all the way down RIP 2008 AW/BL 135i |
|
Appreciate
0
|
01-03-2014, 06:40 PM | #7 | |
UnderminE
9
Rep 62
Posts |
Solved
I figured this out.
You have a newer E-Series I assume, use reset_kurzschluss_sperre, enter just a number 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, and so on, individually but with out the comma, get it? Some people just go through 0-255 but I went through 0-64, cleared every error in my FRM. If this is not clear, let me know. Quote:
|
|
Appreciate
0
|
01-17-2014, 08:31 PM | #8 | |
Lieutenant
72
Rep 524
Posts |
Quote:
Just got mine fixed as well. Turned out to be a software issue on my computer. Ended up creating a Virtual Machine and loading all the software back on and now I have working angel eyes!! Thanks for the help!
__________________
2010 AW/BLK 135i VM 6465 Single Turbo, JB4 + MHD, VRSF CP & Tial, Big Tom, Fuel-It PI + Stage 3 + Return + Ethanol Sensor, BMW PE, MFactory LSD, Spec 3+ & MFactory SMFW, RB External PCV
Best stock turbo 12.5 @ 19.46 spinning all the way down RIP 2008 AW/BL 135i |
|
Appreciate
0
|
06-08-2015, 10:14 PM | #9 | |
Brigadier General
681
Rep 3,696
Posts |
Quote:
|
|
Appreciate
0
|
06-08-2015, 10:56 PM | #10 |
Enlisted Member
2
Rep 47
Posts |
Read post #4 and go read the thread on bimmerforum, it should have everything you need to know.
__________________
2011 E92, 2006 E90
|
Appreciate
0
|
06-09-2015, 11:16 AM | #11 |
Brigadier General
681
Rep 3,696
Posts |
|
Appreciate
0
|
06-10-2015, 02:23 AM | #12 | |
First Lieutenant
46
Rep 357
Posts |
Quote:
http://www.bimmerforums.com/forum/sh...-to-FRM2/page3 Can you get to stuern_lampen_kurzshlussabschaltung in tool32? That is for newer modules. If you can't find that, use _reset_kurzschluss_sperre, you might have an older module. One you get there, you should see lamp_nr. This requires a hexadecimal value (NOT a decimal value) so when you see people talking about resetting all counters between 0-63 (decimal values) they mean you have to convert all those values to hexadecimal before sending the reset job. For example: 0x3f is actually the hexadecimal way of saying 63. Here is a decimal to hexadecimal converter: http://numbermonk.com/ So in the argument box, type the hexadecimal value 0x1 (which means the number 1 in decimal format) and click the "run once" button. Then in the argument box, type the hexadecimal value 0x2 (which means the number 2 in decimal format) and click the "run once" button. Keep doing this until you reach 0x3f which is 63 in decimal format. If you do this, it'll reset all the counters for all bulbs between 0-63 so you won't miss anything. After that, go back to INPA and check the code, and delete it. You should be good! |
|
Appreciate
0
|
06-10-2015, 09:27 AM | #13 | |
Brigadier General
681
Rep 3,696
Posts |
Quote:
What I did find was the following last night: STAT_BEGRL_LINKS_SHORT_CIRCUIT_COUNTER = 50 all the other values were zero last night. |
|
Appreciate
0
|
06-10-2015, 01:53 PM | #14 |
First Lieutenant
46
Rep 357
Posts |
I haven't read about that anywhere. I've ordered an OBD cable, just waiting for that to arrive before I do this on my car as well. I'm having the same issue, no driver angel eye So just saying that my previous response is based on things I've read, I haven't actually coded anything in my life yet haha.
|
Appreciate
0
|
06-10-2015, 09:50 PM | #15 |
Brigadier General
681
Rep 3,696
Posts |
Yeay, i got my AE's working... not gonna give any more update other then that
just kidding. Okay here is what i did: 1) Make sure i'm on map 0 2) Load INPA and make sure i have both black dots so i know my cable works 3) Close INPA (very important to do this) 4) launch TOOL32.EXE 5) click on "jobs" and start typing out: steuern_reset_kurzshlussabschaltung 6) click on the text box located under arguements and enter the various hex values (you will need to try both check marked and unchecked for the box that says DATA). Press F5 or double click on the job name to send each command one by one a) arguement = 0x0 (received error result) b) 0x1 (received error result) c) 0x2 (received error result) d) 0x3 (received error result) e) 0x4 (received error result) f) 0x5 (received error result) g) 0x6 (received error result) h) 0x7 (received error result) i) 0x8 (received error result) j) 0x9 (received error result) k) 0xa (received error result) l) 0xb (Got my first OKAY, and started to jump up and down with joy) 7) went back to the job for reading the counter and instead of showing 50... it was now 1 8) closed TOOL32.EXE and open INPA 9) cleared all errors in the FRM 10) start my car and enjoyed seeing my driver side AE alive again |
Appreciate
0
|
06-11-2015, 12:38 AM | #16 | |
First Lieutenant
46
Rep 357
Posts |
Quote:
Congratulations on getting it to work!!! |
|
Appreciate
0
|
06-11-2015, 10:41 AM | #18 |
Brigadier General
681
Rep 3,696
Posts |
I got mine in 2011 from someone on ebay with software for about $40. I would suggest you to just google "bmw coding cable" and see what prices you find (should be under $20 now a days).
I found the following by doing the quick search (I'm not suggesting you buy this one... just showing an example): http://www.ebay.com/itm/like/1717147...lpid=82&chn=ps If your doing something on ebay, always ask the following of the vendor thru the ebay system: 1) Does your product work with my car (insert your make/model/year/trim here) 2) Does your product come with the software for my car (INPA/TOOL32/Drivers/etc) 3) If the cable does not work with my car or the software does not work with my car, what is your return policy (Time frame to notify you of a problem, replacement item, refund, shipping for returned items covered)? 4) How long is the shipping time, will you provide tracking details? What if I don't receive my product in the mail for 14 days or 30 days? Once you have them reply to these questions and you are okay with the terms... go ahead and bid on the item. Even if you find a local online retailer selling it for about $20 or under... always ask those questions and keep it in your email as proof. Use Paypal to make the sale so you are covered (NEVER SEND AS GIFT, you will have no recourse if it is a garbage product.... pay the stupid 2% fee for the transaction because it's cheap insurance). If you are having problems getting the software working, you can probably find someone on these forums who will help you OR for a fee will set you up (usually includes the remote coding of your car too so they can test it out and you benefit from getting the car done too). Go with someone who seems to have a good rep and lots of positive feedback with coding on the forums if you plan to have someone do remote coding. Last thing you want is for someone to learn on your car :P |
Appreciate
0
|
06-12-2015, 02:03 AM | #19 |
First Lieutenant
46
Rep 357
Posts |
I ordered this one here:
http://www.one-stop-electronics.com/...&product_id=16 Its expensive but probably the most reliable one I found. I didn't want to go through the trouble of ordering cables from china, waiting 30 days for shipping, finding out it doesn't work, and then having to deal with returning/etc. This one has gotten great reviews and is known to work on the newer windows versions as well as pretty much any BMW. I got the software from some guy online. He gave me everything I needed with all updated files. Saved me the frustration of having to look around on forums for latest software files as well as the latest DATEN files for my car. |
Appreciate
0
|
06-13-2015, 09:17 AM | #20 | |
Brigadier General
681
Rep 3,696
Posts |
Quote:
|
|
Appreciate
0
|
06-14-2015, 02:41 AM | #21 |
First Lieutenant
46
Rep 357
Posts |
|
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|