Helix FMIC is in...

sd390r · 02-25-2009, 07:43 PM

Trust me, anyone considering this, go for it

they even have a group buy right now, definitely take them up on the lower price

They also know what they're doing as far as installs... the neighborhood looks a little rough at first (everything's broken down and there's a memorial for a murder victim right across the street) but it's really no problem at all... install was fast and the intercooler fit in PERFECTLY (very tight as per design)

I didn't notice anything until I got out of Philly... as soon as I got on the highway it pulled ALOT (noticeably) harder

4000rpm-6500pm goes by faster, and at 100mph I was pulling harder than ever

Wasn't that bad of a drive either (120mi each way)... I don't know how hotrod drives 800 miles once a month... that's just crazy

whats the deal with PA drivers? I was on i95 for 20 minutes max and saw 3 accidents

E92AXM · 02-25-2009, 07:50 PM

That is one fine looking intercooler..

jpsimon · 02-25-2009, 08:13 PM

You gotta get to ICS now!

sd390r · 02-25-2009, 08:29 PM

Quote:

Originally Posted by jpsimon

You gotta get to ICS now!

im waiting for you to get your FMIC and well go

getInline · 02-25-2009, 08:30 PM

Yup, the group buy is a steal. If they get at least 15 people it will be $799! That's as cheap as a used one.

I think an upgrade FMIC is one of the best mods you can do for improved performance with no negative impact in engine longevity. I like feeding my engine nice cool air!

veightkiller · 02-25-2009, 08:34 PM

Congrats on the new toy!

sd390r · 02-25-2009, 08:34 PM

great price, I bought mine from sfvalley335i around there

I guess he took good care of it, my stock FMIC is horrible, chips everywhere

jpsimon · 02-25-2009, 08:42 PM

Quote:

Originally Posted by sd390r

im waiting for you to get your FMIC and well go

Cool, I'll let you know!

Craig@SupremePower · 02-25-2009, 08:44 PM

Congrats man.....

racerfan · 02-26-2009, 12:55 AM

How is the fit and overall finish, how long did the install take?

getInline · 02-26-2009, 01:15 AM

The group buy is for a new production batch which is slightly narrower and should fit all 335's without cutting. I believe there were a few cases where trimming was required with the previous generation (which is what sd390r bought).

sd390r · 02-26-2009, 01:23 AM

Yeah, according to eric@helix the new/old intercoolers have the same exact performance specs, the new one just fits a little bit easier

it IS possible to get the old one in without cutting, however its a 2 person job and a big hassle, you only have to cut one piece which basically does nothing

however eric personally installed mine and i'm really happy with the results... it fits like a glove... REAL tight, but that's how it was designed

install took maybe 2 hours? I bet he could do it in 1 without talking/distractions/etc

you guys won't be disappointed... in my HONEST opinion this is really the best FMIC available for the 335.... if I didn't think so I wouldn't have bought it

enrita · 02-26-2009, 01:46 AM

Quote:

Originally Posted by getInline

The group buy is for a new production batch which is slightly narrower and should fit all 335's without cutting. I believe there were a few cases where trimming was required with the previous generation (which is what sd390r bought).

i had to do some minor trimming on my e92, it would have fitted anyway but not perfectly so my shop decided to trim a bit .
i got mine in november i think.

Aridk · 02-26-2009, 05:16 AM

Quote:

Originally Posted by sd390r

great price, I bought mine from sfvalley335i around there

I guess he took good care of it, my stock FMIC is horrible, chips everywhere

Sorry to hear that I was hoping to take it of his hands once my financial situation had improved some what.
Congrats

getInline · 02-26-2009, 09:12 AM

Quote:

Originally Posted by sd390r

you guys won't be disappointed... in my HONEST opinion this is really the best FMIC available for the 335.... if I didn't think so I wouldn't have bought it

+1, that's the same conclusion I came to after doing all my research.

4wheelpilot · 02-26-2009, 09:31 AM

how do we get in on the gruop buy?

where was your new IC installed?

thanks.

ralph@helix · 02-26-2009, 10:35 AM

Glad you're liking the intercooler Steve! Crazy accident in that pic, hope they're all fine.
It'll be a better neighborhood next time you stop in the new shop

uhcoug2011 · 02-26-2009, 11:38 AM

Quote:

Originally Posted by ralph@helix

Glad you're liking the intercooler Steve! Crazy accident in that pic, hope they're all fine.
It'll be a better neighborhood next time you stop in the new shop

Ralph, we are closing in on 40 units in the FMIC Group-Buy. I think you should talk to the guys and give us one more price drop for 40

I am sure EVERYONE would greatly appreciate it and there are a few people on the edge of purchasing waiting for one more drop!

Take care

RMA · 02-26-2009, 12:21 PM

Such an awesome deal Helix has going. I noticed a considerable difference when I had my Spearco installed (pulled harder on open hiways). Anyway whoever is still considering this GB they should be all over this ASAP. Especially in regards to the newer redisgned version

Turbo-335CI · 02-26-2009, 12:40 PM

How do we get in on the gruop buy?

sd390r · 02-26-2009, 01:05 PM

Quote:

Originally Posted by ralph@helix

Glad you're liking the intercooler Steve! Crazy accident in that pic, hope they're all fine.
It'll be a better neighborhood next time you stop in the new shop

yeah ralph, told you I wasnt lying when I was "late because of the accident" haha proof...

02-25-2009, 07:43 PM	#1
sd390r Lieutenant Colonel 61 Rep 1,654 Posts Drives: AW M3 Join Date: Aug 2008 Location: North Jersey iTrader: (9) Garage List 2008 E90 335i [0.00]	Helix FMIC is in... Trust me, anyone considering this, go for it they even have a group buy right now, definitely take them up on the lower price They also know what they're doing as far as installs... the neighborhood looks a little rough at first (everything's broken down and there's a memorial for a murder victim right across the street) but it's really no problem at all... install was fast and the intercooler fit in PERFECTLY (very tight as per design) I didn't notice anything until I got out of Philly... as soon as I got on the highway it pulled ALOT (noticeably) harder 4000rpm-6500pm goes by faster, and at 100mph I was pulling harder than ever Wasn't that bad of a drive either (120mi each way)... I don't know how hotrod drives 800 miles once a month... that's just crazy whats the deal with PA drivers? I was on i95 for 20 minutes max and saw 3 accidents Attached Images __________________ 2008 E90 M3 - Sold 2006 Evo IX SE - Sold 2008 E90 335i - Sold
	Appreciate 0 Tweet Quote

02-25-2009, 07:50 PM	#2
E92AXM First Lieutenant 117 Rep 313 Posts Drives: 335i Join Date: Sep 2008 Location: Fl iTrader: (0)	That is one fine looking intercooler..
	Appreciate 0 Quote

02-25-2009, 08:13 PM	#3
jpsimon Team Zissou 3065 Rep 10,197 Posts Drives: 2022 AWD M3 Comp - SMB Join Date: Dec 2006 Location: CT iTrader: (7)	You gotta get to ICS now!
	Appreciate 0 Quote

02-25-2009, 08:30 PM	#5
getInline Lieutenant 12 Rep 412 Posts Drives: 2008 335 Coupe, c32 AMG Join Date: Nov 2007 Location: Parts Unknown iTrader: (1)	Yup, the group buy is a steal. If they get at least 15 people it will be $799! That's as cheap as a used one. I think an upgrade FMIC is one of the best mods you can do for improved performance with no negative impact in engine longevity. I like feeding my engine nice cool air!
	Appreciate 0 Quote

02-25-2009, 08:34 PM	#6
veightkiller Brigadier General 61 Rep 4,150 Posts Drives: e90 335i Join Date: Dec 2007 Location: Vancouver,B.C iTrader: (3)	Congrats on the new toy!
	Appreciate 0 Quote

02-25-2009, 08:44 PM	#9
Craig@SupremePower G.O.A.T.! 1000 Rep 74,998 Posts Drives: '18 GMC Yukon XL Join Date: Mar 2008 Location: New Jersey iTrader: (14)	Congrats man.....
	Appreciate 0 Quote

02-26-2009, 12:55 AM	#10
racerfan Private First Class 7 Rep 197 Posts Drives: E90 Join Date: Oct 2008 Location: Vancouver iTrader: (0) Garage List 2008 335 [0.00]	How is the fit and overall finish, how long did the install take?
	Appreciate 0 Quote

02-26-2009, 01:15 AM	#11
getInline Lieutenant 12 Rep 412 Posts Drives: 2008 335 Coupe, c32 AMG Join Date: Nov 2007 Location: Parts Unknown iTrader: (1)	The group buy is for a new production batch which is slightly narrower and should fit all 335's without cutting. I believe there were a few cases where trimming was required with the previous generation (which is what sd390r bought).
	Appreciate 0 Quote

02-26-2009, 01:23 AM	#12
sd390r Lieutenant Colonel 61 Rep 1,654 Posts Drives: AW M3 Join Date: Aug 2008 Location: North Jersey iTrader: (9) Garage List 2008 E90 335i [0.00]	Yeah, according to eric@helix the new/old intercoolers have the same exact performance specs, the new one just fits a little bit easier it IS possible to get the old one in without cutting, however its a 2 person job and a big hassle, you only have to cut one piece which basically does nothing however eric personally installed mine and i'm really happy with the results... it fits like a glove... REAL tight, but that's how it was designed install took maybe 2 hours? I bet he could do it in 1 without talking/distractions/etc you guys won't be disappointed... in my HONEST opinion this is really the best FMIC available for the 335.... if I didn't think so I wouldn't have bought it __________________ 2008 E90 M3 - Sold 2006 Evo IX SE - Sold 2008 E90 335i - Sold
	Appreciate 0 Quote

02-26-2009, 09:31 AM	#16
4wheelpilot Private First Class 21 Rep 128 Posts Drives: 2007 e90 335i 6MT Join Date: Nov 2008 Location: Pennsylvania iTrader: (2)	how do we get in on the gruop buy? where was your new IC installed? thanks. __________________ 2007 e90 335i SG/Beige/Dark Burl-Premium : Sport-6MT : CA : iPod Adapter : 18" OZ Superleggera III w/ ContiSportContact 235F, 255R : 18" Rial w/ Blizzaks 225F+R : Hamann-style front splitter : 35% Tint : Aluminum pedals...Sunglass holder, Blacklines soon.
	Appreciate 0 Quote

02-26-2009, 10:35 AM	#17
ralph@helix 5 Rep 45 Posts Drives: evo 8 Join Date: Jun 2008 Location: @ helix iTrader: (1)	Glad you're liking the intercooler Steve! Crazy accident in that pic, hope they're all fine. It'll be a better neighborhood next time you stop in the new shop
	Appreciate 0 Quote

02-26-2009, 12:21 PM	#19
RMA Major 38 Rep 1,015 Posts Drives: 2009 135i M sport coupe Join Date: Jul 2008 Location: Tampa, Fl iTrader: (6) Garage List 2009 135i M sport c ... [0.00]	Such an awesome deal Helix has going. I noticed a considerable difference when I had my Spearco installed (pulled harder on open hiways). Anyway whoever is still considering this GB they should be all over this ASAP. Especially in regards to the newer redisgned version __________________
	Appreciate 0 Quote

02-26-2009, 12:40 PM	#20
Turbo-335CI New Member -1 Rep 28 Posts Drives: 2007 E92 335i Join Date: Dec 2007 Location: East Coast iTrader: (0)	How do we get in on the gruop buy?
	Appreciate 0 Quote