[Timothydevisser]

Is it possible to change jbbf 1 to jbbf 2 ?

I did place a jbbf2 in my car and it runs fine.
Bud need to code it to car and can't get a connection with the obd socket...

Need a jbbf2 for my airco magnetic clutch to work in my car...

Is there a way to get a connection with the car when using a jbbf2 ?

[icon2015]

You have to get another wire from your JBBF to your OBD, see the pic I have attached.

Tip: OBD pins are different than any other on the car, so you have to take them from another OBD connector.

[Timothydevisser]

So i need to run a cable from pin 17 on blue jbbf connector to 7 on the obd ?

[Timothydevisser]

Originally Posted by icon2015

You have to get another wire from your JBBF to your OBD, see the pic I have attached.

Tip: OBD pins are different than any other on the car, so you have to take them from another OBD connector.

you know there is already a wire running from pin 7 on the obd in my car ?

[icon2015]

Yes, you will have to move pin 7 to pin 14 in OBD connector, which is pretty hard without the proper tools,(or add a new wire and keep the olf, just remove it from JBBF) and add one more wire from JBBF, blue connector, pin 17 to OBD connector pin 6.

[Timothydevisser]

Will this give me access to all the car modules or only the jbbf ? Will je jbbf change to Kline after coding it to my vo/fa ?

[icon2015]

JBBF is the gateway for the car, thus, once you can connect to it, you will be able to connect to all the other car ECUs. The communication protocol for JBBF is not switchable by coding. Therefor, after coding you will have to keep the new wiring you have just made.

[scroller]

Hello, I retrofitted from Jbbf 1 to Jbbf2 so, because I retrofitted because I want to get the extra rear electric sunshade so my question is, which diagram from bmwtis do I need to use I am a little bit confused about what's the difference between OBD from 2007 and OBD 2 2009? someone just spoke on the phone, he said to me I need to get 2 cables from the new JBBF module to the OBD 2 but as I said I don't which diagram to choose. The second thing that confuses me is which parts I need to order from realmoem

WBAVA71030VE30960 : VIN of my vehicle.

https://www.realoem.com/bmw/enUS/sho...diagId=61_2093

I am not 100% sure but I need this I think 61130056961?

https://www.realoem.com/bmw/enUS/sho...64#61136954580



and for the OBD I think I need between these two-part numbers
61138364519
61138366598
I think they are the same but I am not 100% sure

Thank you in advance if someone helps me with something. Sorry for my bad english.