Forgestar F14 Super Deep Concave Help

gunda · 07-30-2013, 12:35 AM

Quote:

Originally Posted by tylerwillingham

I must have glazed past that photo.

How do you like the BC coils? I've been considering getting some but have heard mixed reviews about them. I was looking at getting the Extreme Drop variants from Flushstance.

The BC Coilovers is your best bet if you want to go low, it comes with front camber plates which is very useful towards getting your fitment right. It is not stainless steel, but you can always use some kind of lubricant to protect it against the winter.

xzibit a · 07-30-2013, 06:56 AM

Looks Awesome, You said thats at -2deg of camber and it still has that much poke.

I dont understand how people keep asking if you had to add camber or a fender roll? Its obvious with any poked setup that that is a given

triggz · 07-30-2013, 07:59 AM

I thought they would be more concave than this.

Stance is a fad I will never understand. Performance/race car will never go out of style.

I guess some people don't care about going to the track and only care about fanboys saying "sick stance bro" lolol

Sick wheels nonetheless

xzibit a · 07-30-2013, 09:31 AM

Quote:

Originally Posted by triggz

I thought they would be more concave than this.

Stance is a fad I will never understand. Performance/race car will never go out of style.

I guess some people don't care about going to the track and only care about fanboys saying "sick stance bro" lolol

Sick wheels nonetheless

The Show car vs racecar debate has been going on since people started modifying cars. Its nothing new, The only differences are the trends in the show car scene.

CarEnthused · 07-30-2013, 09:36 AM

Quote:

Originally Posted by triggz

I thought they would be more concave than this.

Stance is a fad I will never understand. Performance/race car will never go out of style.

I guess some people don't care about going to the track and only care about fanboys saying "sick stance bro" lolol

Sick wheels nonetheless

The wheels are pretty concave. It might just be the angles that are throwing you off. He has photos of these wheels on the 1st of second page before the install and you can see how deep they are.

gunda · 07-30-2013, 10:24 AM

The wheels are very concave, but the pictures dont do it justice. In regards to the racecar/stance/performance argument, Im still able to step on it and get very good traction. My car is FBO + stainless steel meth+ JB4 G5, so I did think about performance first, then went into cosmetics. I actually have a separate set of wheels that I use for fun as well and with the fender trim I'm able to fit wider tires in the rear for better traction as well.

Dcara · 07-30-2013, 10:50 AM

What finish are those?

Quote:

Originally Posted by gunda

I haven't had anytime to get proper pictures takes as I am super busy and came down with a very bad fever recently, but since I know a lot of people have been asking for pictures here are some shots I took with my iPhone as I was initially installing the wheels.

gunda · 07-30-2013, 01:07 PM

The color is brilliant silver i believe.

gunda · 08-01-2013, 11:51 AM

For everyone that is Sending me PM's about fitment and purchases I would like to direct you guys towards Devin (project335i). This guy is a stand up individual and I couldn't have done this without his help, he taught me everything I know about fitment and put up with my many phone calls/texts. He made multiple accounts and posted in this thread as well lol

. if you guys need help, you should seek him out, or ill be glad to help as well

#Tee · 08-01-2013, 11:57 AM

the fronts looks like a easy fit, those reps at the forgestar store are full of shit lol. they be making up all this crap about the sdc would hit the caliper instead of just test fitting it to find out for themselves lol. btw nice stance brololol.

gunda · 08-01-2013, 12:12 PM

Quote:

Originally Posted by #Tee

the fronts looks like a easy fit, those reps at the forgestar store are full of shit lol. they be making up all this crap about the sdc would hit the caliper instead of just test fitting it to find out for themselves lol. btw nice stance brololol.

Thanks, I just got my FK bumpstops in the mail today. Im going to install them and lower the front a little while im at it

Dr. G · 08-01-2013, 04:35 PM

Quote:

Originally Posted by gunda

Thanks, I just got my FK bumpstops in the mail today. Im going to install them and lower the front a little while im at it

If you have extras let me know, I think I may need some.

sirdonnie84 · 08-01-2013, 04:55 PM

Quote:

Originally Posted by gunda

I haven't had anytime to get proper pictures takes as I am super busy and came down with a very bad fever recently, but since I know a lot of people have been asking for pictures here are some shots I took with my iPhone as I was initially installing the wheels.

Car looks nice !!! What's the specs on the wheels ?

CarEnthused · 08-01-2013, 06:01 PM

Quote:

Originally Posted by sirdonnie84

Car looks nice !!! What's the specs on the wheels ?

Wheel specs are on the first page, tire specs are on the first page. I reposted them on page 8

e90'D10 · 08-05-2013, 01:37 PM

Quote:

Originally Posted by hawaiianeze

Nice wheels, what kind of rims are these? Any rubbing issues?

madbim · 08-05-2013, 01:42 PM

Any chance you can do the SDC without the stretched look?

CarEnthused · 08-05-2013, 06:12 PM

Quote:

Originally Posted by madbim

Any chance you can do the SDC without the stretched look?

Not without a widebody

CarEnthused · 08-05-2013, 06:47 PM

Quote:

Originally Posted by e92'D09

Nice wheels, what kind of rims are these? Any rubbing issues?

This is a forgestar f14 thread so it's safe to assume they're Forgestar F14's (they are). They look like the set you can buy on Mod bar gains (only size that they keep in stock)

Dr. G · 08-05-2013, 07:55 PM

Quote:

Originally Posted by madbim

Any chance you can do the SDC without the stretched look?

In the rear you can

sirdonnie84 · 08-09-2013, 10:19 AM

Quote:

Originally Posted by gunda

I haven't had anytime to get proper pictures takes as I am super busy and came down with a very bad fever recently, but since I know a lot of people have been asking for pictures here are some shots I took with my iPhone as I was initially installing the wheels.

How's ur front fenders clearance ? I'm scared for my front fenders cause they're plastic :/

CarEnthused · 08-09-2013, 10:27 AM

Quote:

Originally Posted by sirdonnie84

How's ur front fenders clearance ? I'm scared for my front fenders cause they're plastic :/

His fronts are plastic as well. He said front clearance is great. He could run a more aggressive offset and he is planning on going lower.

Gemballa1980 · 09-09-2013, 10:11 PM

Quote:

Originally Posted by e92'D09

Nice wheels, what kind of rims are these? Any rubbing issues?

Sorry for the delay..

Sizes are:
Front: 19x8.5" ET35 (235/35)
Rear: 19x10" ET28 (265/30)

Tyres: Nitto Invo.

No rubbing whatsoever.

A few more happy snaps.. And a choice of CF or red Forgestar centre caps!

07-30-2013, 06:56 AM	#178
xzibit a Captain 33 Rep 676 Posts Drives: 07 335i Join Date: Oct 2012 Location: NOVA iTrader: (1)	Looks Awesome, You said thats at -2deg of camber and it still has that much poke. I dont understand how people keep asking if you had to add camber or a fender roll? Its obvious with any poked setup that that is a given
	Appreciate 0 Quote

07-30-2013, 07:59 AM	#179
triggz Banned 56 Rep 1,225 Posts Drives: E92 335i Join Date: Jun 2010 Location: Toronto iTrader: (2)	I thought they would be more concave than this. Stance is a fad I will never understand. Performance/race car will never go out of style. I guess some people don't care about going to the track and only care about fanboys saying "sick stance bro" lolol Sick wheels nonetheless
	Appreciate 0 Quote

07-30-2013, 10:24 AM	#182
gunda Lieutenant 47 Rep 465 Posts Drives: 2008 BMW 335i e92 Join Date: Apr 2012 Location: Mississauga iTrader: (0)	The wheels are very concave, but the pictures dont do it justice. In regards to the racecar/stance/performance argument, Im still able to step on it and get very good traction. My car is FBO + stainless steel meth+ JB4 G5, so I did think about performance first, then went into cosmetics. I actually have a separate set of wheels that I use for fun as well and with the fender trim I'm able to fit wider tires in the rear for better traction as well.
	Appreciate 0 Quote

07-30-2013, 01:07 PM	#184
gunda Lieutenant 47 Rep 465 Posts Drives: 2008 BMW 335i e92 Join Date: Apr 2012 Location: Mississauga iTrader: (0)	The color is brilliant silver i believe.
	Appreciate 0 Quote

08-01-2013, 11:51 AM	#185
gunda Lieutenant 47 Rep 465 Posts Drives: 2008 BMW 335i e92 Join Date: Apr 2012 Location: Mississauga iTrader: (0)	For everyone that is Sending me PM's about fitment and purchases I would like to direct you guys towards Devin (project335i). This guy is a stand up individual and I couldn't have done this without his help, he taught me everything I know about fitment and put up with my many phone calls/texts. He made multiple accounts and posted in this thread as well lol . if you guys need help, you should seek him out, or ill be glad to help as well
	Appreciate 0 Quote

08-01-2013, 11:57 AM	#186
#Tee Major General 557 Rep 5,367 Posts Drives: yes Join Date: Oct 2011 Location: Socal iTrader: (2)	the fronts looks like a easy fit, those reps at the forgestar store are full of shit lol. they be making up all this crap about the sdc would hit the caliper instead of just test fitting it to find out for themselves lol. btw nice stance brololol. __________________ You can follow my builds on IG: Tee212
	Appreciate 0 Quote

08-05-2013, 01:42 PM	#192
madbim Private First Class 32 Rep 160 Posts Drives: 08' E90 335xi Join Date: May 2011 Location: Madison, WI iTrader: (0)	Any chance you can do the SDC without the stretched look?
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search