|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
335i sport springs on an XI?!?!
|
|
12-01-2014, 10:49 AM | #1 |
Major
98
Rep 1,321
Posts
Drives: Truck in snow, coupe in summer
Join Date: Jan 2013
Location: Boston
|
335i sport springs on an XI?!?!
Read many posts and threads but can't seem to find a straight answer. I installed Dinan springs and rear drop is perfect. Front is still a bit high. Typical XI issues. Looking for an affordable way to drop the front a half to a full inch. Thanks smart guys!
__________________
2009 BSM E92 335xi - RR600's/FBO-VRSF/Apex Arc 8/Wedge E60 MHD/Fuel it Stage 2/BMW PE w/ Dimisa Tips/Alpina TCU/Dinan Springs/RB Inlets/3.5 Bar TMAP
|
12-02-2014, 01:58 PM | #2 |
Private First Class
9
Rep 114
Posts |
BUMP - interested in this as well.
__________________
2011 328i xDrive / Deep Sea Blue / Navigation / Sport Package / Convenience Package / Premium Package / HK Sound / and a bunch of other stuff I am not aware of..
|
Appreciate
0
|
12-13-2014, 10:51 AM | #3 |
Colonel
285
Rep 2,146
Posts
Drives: F80 M3
Join Date: Aug 2012
Location: Canada
|
same
__________________
Instagram: http://instagram.com/e90nate
|
Appreciate
0
|
12-16-2014, 09:31 AM | #4 |
New Member
0
Rep 10
Posts |
I think the reason for the bigger fender gap in the front of the vehicle is due to the fender opening is higher than the rear fender opening. Otherwise, I would think that the spacer plate on the front strut mounts could be removed to lower it...though I don't know what that would do for the threaded studs sticking proud at the strut tower.
|
Appreciate
0
|
12-19-2014, 08:53 AM | #5 |
First Lieutenant
11
Rep 333
Posts |
I was in the same boat, no one on the forum had a straight answer on i vs XI sport springs. Leaving some XI guys that bought i springs with ride quality problems.
Ended up calling H&R customer service, and there is a difference between springs. I can't remember if the difference from i and XI is the rear springs making the fronts the same. Or the other way around. All I do know is to get Part #50494.
__________________
/// Look Sharp, Live Smart
|
Appreciate
0
|
12-19-2014, 11:20 AM | #6 |
New Member
0
Rep 10
Posts |
I've read that i springs will physically fit the XI strut perches.
However, the i springs are too soft and stiffer springs are required for the front; the front i springs have a lower spring rate than the stiffer front xi springs. As for the appeared rake when using DINAN springs, I noticed that optical illusion; but I confirmed that the ride height just behind the front wheel is identical to the ride height just in front of the rear wheel. |
Appreciate
0
|
Bookmarks |
|
|