Wanted: 10mm Wheel Spacers

Cozy · 09-07-2012, 04:18 AM

...with bolts and preferably hub centric

.

makkan00 · 09-07-2012, 05:33 AM

+1
I need a pair as well after JamJay.

smoked · 09-07-2012, 06:28 AM

I've got some 20's if either of you is feeling brave

Cozy · 09-07-2012, 06:47 AM

Quote:

Originally Posted by makkan00

+1
I need a pair as well after JamJay.

Really, even with your Alufulgen's? What's the offset on those? I was using ET30 on my 335i 'vert and that was about the limit for stock arches.

Quote:

Originally Posted by smoked

I've got some 20's if either of you is feeling brave

That'd be very brave for me sadly, it'd stick my stock wheels at around ET30 which for the E82 is a little too much, ET35 is probably the widest I could do without a severe drop but it'd still rub and need arch rolling with a mild drop I think. I do miss the bigger arches on the 3-series.

Reardy Mister · 09-07-2012, 09:55 AM

I need some too, after them two what already said, like.

10mm all round if you have 'em.

makkan00 · 09-07-2012, 10:11 AM

Quote:

Originally Posted by JamJay

Really, even with your Alufulgen's? What's the offset on those? I was using ET30 on my 335i 'vert and that was about the limit for stock arches.

If I am not wrong, they are ET30.
I am sure 10 mm can still go in there. I may get bit of rubbing but happy to roll the fenders.

Tyso335 · 09-10-2012, 10:29 AM

ebay sell some with bolts good price

davyk31 · 09-10-2012, 10:48 AM

Quote:

Originally Posted by smoked

I've got some 20's if either of you is feeling brave

Do these only fit an E9x or would they also fit an E70 X5?

Zechariaha · 09-10-2012, 10:50 AM

i got a set of 12's HC spacer only

smoked · 09-10-2012, 11:54 AM

Quote:

Originally Posted by davyk31

Do these only fit an E9x or would they also fit an E70 X5?

im not entirely certain. i bet people on here know the pcd's off by heart!

alzieboy · 09-10-2012, 12:33 PM

Have a look here

http://www.ebay.co.uk/itm/BMW-3-SERI...item45f91f9e62

AWBimmer · 09-10-2012, 01:38 PM

They can't be that pricey even at brand new? £50-£60?

Reardy Mister · 09-10-2012, 02:58 PM

Quote:

Originally Posted by Zechariaha

i got a set of 12's HC spacer only

For sale?

Cozy · 09-11-2012, 02:55 AM

Quote:

Originally Posted by Zechariaha

i got a set of 12's HC spacer only

Interested based on price inc shipping to UK

...

Cozy · 09-11-2012, 02:57 AM

Quote:

Originally Posted by alzieboy

Have a look here

http://www.ebay.co.uk/itm/BMW-3-SERI...item45f91f9e62

I already have a set of these, really good quality actually and light also. I am looking for 10mm for the front axle to give the car a marginally wider look at the rear. 15mm is too great as I am upsizing the tyres and I'll rub with my drop.

alzieboy · 09-11-2012, 03:34 AM

Quote:

Originally Posted by JamJay

I already have a set of these, really good quality actually and light also. I am looking for 10mm for the front axle to give the car a marginally wider look at the rear. 15mm is too great as I am upsizing the tyres and I'll rub with my drop.

Check his site /shop out they have 10mm Bimmec hubcentric spacers as well

http://mapsltd.co.uk/maps/

Cozy · 09-11-2012, 04:56 AM

Quote:

Originally Posted by alzieboy

Check his site /shop out they have 10mm Bimmec hubcentric spacers as well

http://mapsltd.co.uk/maps/

There's the problem, the 10mm hubcentric spacers are only available when upsizing the centre bore from 72.6 - 74.1, that's not good for stock wheels or any wheels with stock centre bore and would require a rebore of the wheels. http://www.ebay.co.uk/itm/BIMECC-BMW...item43b2eccc0e

The 10mm spacer which is a striaght 72.6mm across the board is only available as a shim. http://www.ebay.co.uk/itm/BMW-BIMECC...item45f299dbd0

alzieboy · 09-11-2012, 05:38 AM

Quote:

Originally Posted by JamJay

There's the problem, the 10mm hubcentric spacers are only available when upsizing the centre bore from 72.6 - 74.1, that's not good for stock wheels or any wheels with stock centre bore and would require a rebore of the wheels. http://www.ebay.co.uk/itm/BIMECC-BMW...item43b2eccc0e

The 10mm spacer which is a striaght 72.6mm across the board is only available as a shim. http://www.ebay.co.uk/itm/BMW-BIMECC...item45f299dbd0

Oooops SorryJamJay I Didnt spot that

Cozy · 09-11-2012, 05:54 AM

No worries, when I first saw them I nearly jumped the gun and clicked "Buy"

.

The only place I have found 10mm hubcentric is Terry @ Juiced Up, he sell the BMS spacers and it doesn't suggest that they are shims only. Can anyone confirm?

It's rapidly looking like a 12mm square setup right now but TBH I guess that there really is only 4mm in it. I've had 10mm front & 15mm rear on a previous car and even though it was only 10mm difference across the whole axle, you could clearly see that the rears were wider.

Josh1a1h · 09-11-2012, 06:58 AM

Quote:

Originally Posted by JamJay

No worries, when I first saw them I nearly jumped the gun and clicked "Buy"

.

The only place I have found 10mm hubcentric is Terry @ Juiced Up, he sell the BMS spacers and it doesn't suggest that they are shims only. Can anyone confirm?

It's rapidly looking like a 12mm square setup right now but TBH I guess that there really is only 4mm in it. I've had 10mm front & 15mm rear on a previous car and even though it was only 10mm difference across the whole axle, you could clearly see that the rears were wider.

Did the 15mm on the rear look good? any rubbing issues or protruding from the arch problems?

What do you think the widest on the front and rear with stock MV3s is possible?

Cheers

Hotcoupe · 09-11-2012, 07:40 AM

http://www.performancealloys.com/spa...ls.aspx?ID=230

Cozy · 09-11-2012, 08:30 AM

Quote:

Originally Posted by Josh1a1h

Did the 15mm on the rear look good? any rubbing issues or protruding from the arch problems?

What do you think the widest on the front and rear with stock MV3s is possible?

Cheers

15mm on my E93 made the rear look very fat and was about the limit you could go to before rubbing (if lowered). They made the front wheels look dwarf'd though so I'd not recommend only doing one axle and would add some 10mm or 12mm up front if you want a wide rear look or go for a sqaure 12mm or 15mm setup to even it out more.

Quote:

Originally Posted by Hotcoupe

http://www.performancealloys.com/spa...ls.aspx?ID=230

Nice to come acorss you on a forum again

, I've been a little quiet on the car front.

Very nice. I had these on before, very very light but I was hoping to find someone on here with a cheaper second hand set

.

09-07-2012, 04:18 AM	#1
Cozy Major 111 Rep 1,487 Posts Drives: E82 135i Join Date: Mar 2011 Location: Surrey, England iTrader: (0)	Wanted: 10/12/15mm Wheel Spacers ...with bolts and preferably hub centric . Last edited by Cozy; 09-23-2012 at 01:27 PM..
	Appreciate 0 Tweet Quote

09-07-2012, 05:33 AM	#2
makkan00 Major General 886 Rep 9,097 Posts Drives: F83 and F36 Join Date: Dec 2011 Location: Essex iTrader: (56)	+1 I need a pair as well after JamJay. __________________ F36 Xdrive for her - HUD, park assist, heated steering wheel, rear camera, Apple car play F36 RWD for him - HK, M sports pack, GTS tail light, Apple car play
	Appreciate 0 Quote

09-07-2012, 06:28 AM	#3
smoked Private First Class 10 Rep 139 Posts Drives: 335i Touring Join Date: Aug 2011 Location: United Kingdom iTrader: (2)	I've got some 20's if either of you is feeling brave
	Appreciate 0 Quote

09-07-2012, 09:55 AM	#5
Reardy Mister Private 0 Rep 68 Posts Drives: 08 E92 325, Space Grey w/black Join Date: Jul 2012 Location: Southern England iTrader: (0)	I need some too, after them two what already said, like. 10mm all round if you have 'em.
	Appreciate 0 Quote

09-10-2012, 10:29 AM	#7
Tyso335 Captain 49 Rep 850 Posts Drives: E92 335d M Sport....... Join Date: Jun 2012 Location: U.K iTrader: (0)	ebay sell some with bolts good price __________________ Fuel of the Devil NOW: E92 335d M Sport lots of mods to come... Gone But Not Forgotten: EVO 8 MR FQ340 Running 370bhp
	Appreciate 0 Quote

09-10-2012, 10:50 AM	#9
Zechariaha Lieutenant 20 Rep 587 Posts Drives: 2010 E92 M3 Join Date: Jan 2011 Location: OC, Yorba Linda iTrader: (0)	i got a set of 12's HC spacer only
	Appreciate 0 Quote

09-10-2012, 12:33 PM	#11
alzieboy First Lieutenant 15 Rep 360 Posts Drives: E350 CDi Coupe Join Date: Feb 2012 Location: Norfolk moved from East London iTrader: (1)	Have a look here http://www.ebay.co.uk/itm/BMW-3-SERI...item45f91f9e62
	Appreciate 0 Quote

09-10-2012, 01:38 PM	#12
AWBimmer Major General 344 Rep 6,176 Posts Drives: E92 335D Pre-LCI \| E63 M6 V10 Join Date: May 2011 Location: UK iTrader: (4)	They can't be that pricey even at brand new? £50-£60? __________________ BMW E92 335D \| Lower Klasse IG: @that.m6
	Appreciate 0 Quote

09-11-2012, 05:54 AM	#19
Cozy Major 111 Rep 1,487 Posts Drives: E82 135i Join Date: Mar 2011 Location: Surrey, England iTrader: (0)	No worries, when I first saw them I nearly jumped the gun and clicked "Buy" . The only place I have found 10mm hubcentric is Terry @ Juiced Up, he sell the BMS spacers and it doesn't suggest that they are shims only. Can anyone confirm? It's rapidly looking like a 12mm square setup right now but TBH I guess that there really is only 4mm in it. I've had 10mm front & 15mm rear on a previous car and even though it was only 10mm difference across the whole axle, you could clearly see that the rears were wider.
	Appreciate 0 Quote

09-11-2012, 07:40 AM	#21
Hotcoupe Major General 192 Rep 6,110 Posts Drives: Don't know yet! Join Date: Jul 2007 Location: UK iTrader: (2) Garage List November 2008 335D ... [8.34] 2007 335D [0.00]	http://www.performancealloys.com/spa...ls.aspx?ID=230 __________________ ================================= Never argue with an idiot on the internet. He will drag you down to his level and beat you with experience.
	Appreciate 0 Quote