E90Post
 


Extreme Powerhouse
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > Tracking, Autocrossing, Dragstrip, Driving Techniques > Official Learn To Drive Manual Cars Thread



Reply
 
Thread Tools Search this Thread
      02-07-2008, 06:45 PM   #111
!Xoible
Banned
United_States
823
Rep
46,029
Posts

Drives: ....
Join Date: Nov 2006
Location: .

iTrader: (4)

Garage List
2008 M3  [4.00]
2007 335i  [9.00]
2008 528i  [8.00]
2006 Infiniti - G35 ...  [8.00]
^^ makes the experience 10 times funner once you get it down
Appreciate 0
      02-07-2008, 06:50 PM   #112
asif163
Captain
asif163's Avatar
No_Country
99
Rep
832
Posts

Drives: '19 M5C, '23 X7 LCI
Join Date: Nov 2007
Location: Montclair, NJ

iTrader: (0)

Quote:
Originally Posted by mantis View Post
^^ makes the experience 10 times funner once you get it down
Yea it was fun- it's just that I have think about it now and it's work- it'll be alot more fun when it's second nature I'm sure...
__________________
2019 M5 Competition / Acquired: 04.12.2021
2020 VW Atlas / Acquired 03.15.2020
2023 X7 M-Sport / Acquired: 11.19.2022

Retired: 2011 E90 ZCP M3, 2014 Range Rover Sport, 2006 Audi S4 V8, 2011 E92 ZCP M3, 2011 BMW X3, 2009 Infiniti G37S Coupe, 2006 Audi A4 S-Line 2.0T, 2008 E92 335i, 2005.5 Audi S4 V8, 1990 E30 325is
Appreciate 0
      02-07-2008, 07:00 PM   #113
captainaudio
World's Foremost Authority
captainaudio's Avatar
United_States
1181
Rep
4,535
Posts

Drives: M4 Cab - Cayenne GTS - Jag XK
Join Date: Jul 2007
Location: Upper East Side Manhattan - Boca Raton FL - Lime Rock CT

iTrader: (0)

Quote:
Originally Posted by BoostedBMW View Post
I've only skimmed the first few posts because I have been driving a MT for a few years and don't think I need to learn at this point, but why would you need to push in the clutch twice to revmatch a downshift? That just seems like it would take waaaaay to long to do smoothly.

Just put the clutch in, select the lower gear, and as you are letting the clutch back out blip the throttle right before the engagement point. I guess I don't see the point of double clutching then.
It is important to match revs on a downshift. If you do not match revs when you engage the lower gear the car will slow down. This will transfer weight to the front wheels, enlarge the size of the front contact patches and reduce the size of the rear contact patches. If you are at or near the limits of adhesion this can cause Trailing Clutch Oversteer (TCO) which can cause the car to spin out.

To properly execute a downshift while braking:
1. Apply the brakes smoothly with the left side of your right foot..
2. Depress the clutch with your left foot
3. While braking rock your right foot and "blip" the accelerator.
4; Shift into the next lower gear.
6. Release the clutch.

If this is done properly the car will not slow down/

On cars without synchomesh transmissions it is necessary to "Double Clutch"

1, Apply the brakes with the left side of your right foot.
2. Depress the Clutch with your left foot.
3. Shift into neutral
4. Release the Clutch
5.While still braking smoothly rock your right foot and "blip" the accelerator
8, Depress the clucth with your left foot.
9. Shift into the next lower gear.
10. Release the Clutch.

Once you get the hang of it this can be accomplished very quickly and very smoothly.

Many race cars have "Straight Cut" gears and non-synchomesh transmissions.

Most modern MT cars (such as BMWs) have bevel cut gears and sychomesh transmissions. Although "Double Clutching" will work it is not necessary.

I got into the habit of double clutching when I started learnig how to drive race cars. I had 130,000 miles on my Lexus SC300 when I got rid of it and I was still on the original clutch and brakes.


"Coasting" is not a good practice. To keep a car properly balanced you should either be accelerating or braking or applying "maintenance throttle". This is not usually citical whe driving on the road well below the limits of the car but when driving a race car at or close to the limits "coasting" can upset the cars balance. The brakes and accelerator are as much for keeping the car balanced as they are for speeding up and slowing it down.



CA
__________________

Drivers Club at Lime Rock - International Motorsports Research Center - Society of Automotive Historians - Madison Avenue Sports Car Driving and Chowder Society (0nly a VP) - BMWCCA - Porsche Club of America - M Gruppe - Polish Race Drivers of America (PDRA) - Glen Club (Watkins Glen International) - Jaguar Club of Southern New England

Last edited by captainaudio; 02-07-2008 at 07:29 PM..
Appreciate 0
      02-07-2008, 07:33 PM   #114
orionredwing
Captain
106
Rep
728
Posts

Drives: 335i Sedan, 135i Coupe
Join Date: Dec 2006
Location: San Jose

iTrader: (0)

Garage List
2007 335i  [10.00]
Q: On a HARD brake (not slamming the brakes), how many of you guys unintentionally leave your car in neutral because you have the clutch depressed, even though you have moved your shifter to the lower gear?

....just thought I'd start a new Q: in the spirit of the thread.

As I slow down, I usually downshift to go with it, but when I brake hard, I usually have the clutch depressed and end up in neutral. That's because when I brake hard, it's a natural feeling to keep both feet depressed in the same direction (left foot clutch, right foot brake). Your attention is also typically diverted by the traffic situation which caused you to brake hard in the first place.

Except for that, it's all good. I had put 95K miles on my Prelude on my original clutch b4 I sold the car, and the clutch was still good. No slips at all, despite aggressive driving / downshifting, etc. Of course, that car didn't have much torque, so it was easier on the clutch, but still, 95K miles on the original clutch shows I didn't have too many bad shifting habits
__________________

PROcede | AMS FMIC | AR Catless DPs | AR Oil Cooler | BMS DCI
Wavetrac LSD | KW V3 w/ Swift Springs | M3 Front Suspension
Appreciate 0
      02-07-2008, 08:01 PM   #115
captainaudio
World's Foremost Authority
captainaudio's Avatar
United_States
1181
Rep
4,535
Posts

Drives: M4 Cab - Cayenne GTS - Jag XK
Join Date: Jul 2007
Location: Upper East Side Manhattan - Boca Raton FL - Lime Rock CT

iTrader: (0)

Quote:
Originally Posted by orionredwing View Post
Q: On a HARD brake (not slamming the brakes), how many of you guys unintentionally leave your car in neutral because you have the clutch depressed, even though you have moved your shifter to the lower gear?

....just thought I'd start a new Q: in the spirit of the thread.

As I slow down, I usually downshift to go with it, but when I brake hard, I usually have the clutch depressed and end up in neutral. That's because when I brake hard, it's a natural feeling to keep both feet depressed in the same direction (left foot clutch, right foot brake). Your attention is also typically diverted by the traffic situation which caused you to brake hard in the first place.

Except for that, it's all good. I had put 95K miles on my Prelude on my original clutch b4 I sold the car, and the clutch was still good. No slips at all, despite aggressive driving / downshifting, etc. Of course, that car didn't have much torque, so it was easier on the clutch, but still, 95K miles on the original clutch shows I didn't have too many bad shifting habits
You should never slam the brakes. The brakes should be squeezed. With practice you can learn to "threshold" brake (brake hard but still not lock the brakes). If this is done well you can outperform ABS. If you are turning while braking you will have to "give back" some brakes to allow the car to turn. At the exteme these techniques can be used to "rotate" the car and point it into a turn. The clutch should only be depressed when you are changing gears and then only for a very short time. You want to minimize the amount of time that the engine is not coupled to the drive wheels.

Skip Barber racing (www.skipbarber.com) has a book and a video called "Going Faster" that explains these techniques very clearly.

http://store.nexternal.com/shared/St...unt2=118369698
__________________

Drivers Club at Lime Rock - International Motorsports Research Center - Society of Automotive Historians - Madison Avenue Sports Car Driving and Chowder Society (0nly a VP) - BMWCCA - Porsche Club of America - M Gruppe - Polish Race Drivers of America (PDRA) - Glen Club (Watkins Glen International) - Jaguar Club of Southern New England
Appreciate 0
      02-07-2008, 08:24 PM   #116
txusa03
Major General
547
Rep
6,563
Posts

Drives: TS330iPPSP6MT
Join Date: Jul 2005
Location: Planet Earth

iTrader: (3)

Quote:
Originally Posted by mantis View Post
I found this article very helpful.

http://en.wikipedia.org/wiki/Clutch

Make sure you understand the functions of 3 things very well and ask questions if you dont:
1. What the clutch plate does
2. What the flywheel does
3. What the synchronizers do
Does anyone have a link that shows an actual photo of a synchronizer to help me understands how it works. The link above described the synchronizer but I am having a hard time applying the text description into pictures, a real photo would be a plus.
__________________
under construction!
Appreciate 0
      02-07-2008, 09:01 PM   #117
gos
Captain
27
Rep
959
Posts

Drives: E90 330xi
Join Date: Jan 2006
Location: Colorado

iTrader: (0)

Quote:
Originally Posted by joonsup View Post
the only time i roll in neutral is when my gas light has been on and i'm going downhill trying to find the closest gas station. haha. luckily i haven't had to do that with my bimmer yet.
Your car will get better mileage rolling downhill in 6th, than it gets rolling downhill in neutral.

This is why we need this thread.
__________________
--
330xi SG/Terra/Burl -- ZPP, ZSP, ZCW, CA, Sirius, PDC
Appreciate 0
      02-07-2008, 09:06 PM   #118
trickydisco
First Lieutenant
trickydisco's Avatar
Canada
7
Rep
331
Posts

Drives: e90 330i
Join Date: Oct 2007
Location: downtown toronto

iTrader: (0)

Quote:
Originally Posted by captainaudio View Post
It is important to match revs on a downshift. If you do not match revs when you engage the lower gear the car will slow down. This will transfer weight to the front wheels, enlarge the size of the front contact patches and reduce the size of the rear contact patches. If you are at or near the limits of adhesion this can cause Trailing Clutch Oversteer (TCO) which can cause the car to spin out.

To properly execute a downshift while braking:
1. Apply the brakes smoothly with the left side of your right foot..
2. Depress the clutch with your left foot
3. While braking rock your right foot and "blip" the accelerator.
4; Shift into the next lower gear.
6. Release the clutch.

If this is done properly the car will not slow down/

On cars without synchomesh transmissions it is necessary to "Double Clutch"

1, Apply the brakes with the left side of your right foot.
2. Depress the Clutch with your left foot.
3. Shift into neutral
4. Release the Clutch
5.While still braking smoothly rock your right foot and "blip" the accelerator
8, Depress the clucth with your left foot.
9. Shift into the next lower gear.
10. Release the Clutch.

Once you get the hang of it this can be accomplished very quickly and very smoothly.

Many race cars have "Straight Cut" gears and non-synchomesh transmissions.

Most modern MT cars (such as BMWs) have bevel cut gears and sychomesh transmissions. Although "Double Clutching" will work it is not necessary.

I got into the habit of double clutching when I started learnig how to drive race cars. I had 130,000 miles on my Lexus SC300 when I got rid of it and I was still on the original clutch and brakes.


"Coasting" is not a good practice. To keep a car properly balanced you should either be accelerating or braking or applying "maintenance throttle". This is not usually citical whe driving on the road well below the limits of the car but when driving a race car at or close to the limits "coasting" can upset the cars balance. The brakes and accelerator are as much for keeping the car balanced as they are for speeding up and slowing it down.



CA
BINGO ... finally
__________________

Barrington
2006 330i sedan TiAg
1998 Porsche 911 C2S
1969 Firebird
Appreciate 0
      02-07-2008, 09:53 PM   #119
orionredwing
Captain
106
Rep
728
Posts

Drives: 335i Sedan, 135i Coupe
Join Date: Dec 2006
Location: San Jose

iTrader: (0)

Garage List
2007 335i  [10.00]
+1

Note I also mentioned to not slam the brakes in my post.

Quote:
Originally Posted by captainaudio View Post
You should never slam the brakes. The brakes should be squeezed. With practice you can learn to "threshold" brake (brake hard but still not lock the brakes). If this is done well you can outperform ABS. If you are turning while braking you will have to "give back" some brakes to allow the car to turn. At the exteme these techniques can be used to "rotate" the car and point it into a turn. The clutch should only be depressed when you are changing gears and then only for a very short time. You want to minimize the amount of time that the engine is not coupled to the drive wheels.

Skip Barber racing (www.skipbarber.com) has a book and a video called "Going Faster" that explains these techniques very clearly.

http://store.nexternal.com/shared/St...unt2=118369698
__________________

PROcede | AMS FMIC | AR Catless DPs | AR Oil Cooler | BMS DCI
Wavetrac LSD | KW V3 w/ Swift Springs | M3 Front Suspension
Appreciate 0
      02-08-2008, 12:06 AM   #120
jnizzle
Private First Class
United_States
3
Rep
107
Posts

Drives: 2008 E92 335i
Join Date: Jun 2007
Location: San Diego

iTrader: (1)

I have a question regarding going on an incline in traffic. Every morning I have to get on the freeway and the entrance ramp that allows 2 cars per green light is on an incline. I crawl up the ramp somewhat slipping/feathering the clutch and applying enough throttle to keep moving. I'll brake when i have to and keep the clutch in at the same time as its very brief before I start moving again. The whole time going up the ramp I do not fully engage the clutch. Is what Im doing incorrect?
Appreciate 0
      02-08-2008, 02:08 AM   #121
!Xoible
Banned
United_States
823
Rep
46,029
Posts

Drives: ....
Join Date: Nov 2006
Location: .

iTrader: (4)

Garage List
2008 M3  [4.00]
2007 335i  [9.00]
2008 528i  [8.00]
2006 Infiniti - G35 ...  [8.00]
Quote:
Originally Posted by gos View Post
Your car will get better mileage rolling downhill in 6th, than it gets rolling downhill in neutral.

This is why we need this thread.

+1
Quote:
Originally Posted by jnizzle View Post
I have a question regarding going on an incline in traffic. Every morning I have to get on the freeway and the entrance ramp that allows 2 cars per green light is on an incline. I crawl up the ramp somewhat slipping/feathering the clutch and applying enough throttle to keep moving. I'll brake when i have to and keep the clutch in at the same time as its very brief before I start moving again. The whole time going up the ramp I do not fully engage the clutch. Is what Im doing incorrect?
yah that's bad for your clutch... that's like those who sit at traffic lights and keep going back and forth using the clutch (aka Mantis )
Appreciate 0
      02-08-2008, 07:51 AM   #122
txusa03
Major General
547
Rep
6,563
Posts

Drives: TS330iPPSP6MT
Join Date: Jul 2005
Location: Planet Earth

iTrader: (3)

Quote:
Originally Posted by txusa03 View Post
Does anyone have a link that shows an actual photo of a synchronizer to help me understands how it works. The link above described the synchronizer but I am having a hard time applying the text description into pictures, a real photo would be a plus.
__________________
under construction!
Appreciate 0
      02-08-2008, 08:54 AM   #123
!Xoible
Banned
United_States
823
Rep
46,029
Posts

Drives: ....
Join Date: Nov 2006
Location: .

iTrader: (4)

Garage List
2008 M3  [4.00]
2007 335i  [9.00]
2008 528i  [8.00]
2006 Infiniti - G35 ...  [8.00]
not a vid but check this out

http://auto.howstuffworks.com/transmission3.htm
Appreciate 0
      02-08-2008, 09:05 AM   #124
!Xoible
Banned
United_States
823
Rep
46,029
Posts

Drives: ....
Join Date: Nov 2006
Location: .

iTrader: (4)

Garage List
2008 M3  [4.00]
2007 335i  [9.00]
2008 528i  [8.00]
2006 Infiniti - G35 ...  [8.00]
More on transmission mechanics:

http://auto.howstuffworks.com/framed...om/gearbox.htm
Appreciate 0
      02-08-2008, 09:06 AM   #125
!Xoible
Banned
United_States
823
Rep
46,029
Posts

Drives: ....
Join Date: Nov 2006
Location: .

iTrader: (4)

Garage List
2008 M3  [4.00]
2007 335i  [9.00]
2008 528i  [8.00]
2006 Infiniti - G35 ...  [8.00]
this is a bit but i think it's good info

How To Read Gear Ratios

http://auto.howstuffworks.com/framed...80/TIP094.html
Appreciate 0
      02-08-2008, 10:42 AM   #126
BK
Smiling politely
United_States
165
Rep
7,931
Posts

Drives: 330i
Join Date: Feb 2006
Location: Washington DC

iTrader: (0)

Garage List
2006 330i  [9.00]
I haven't looked at the photos linked above, but most synchros I've seen in photos are pretty unsophisticated. They look like brass rings. One side is fixed to the collar and the other is open and grabs the end of the spinning gear to synch up the speed of the collar to the gear, so the teeth of the collar will plug into the gear without grinding. Basically, it is grabbing the gear without teeth to allow it to slip a bit and speed up, before it inserts the teeth into the gear.

Those with more knowledge can correct me if I've described it wrong, but it seems like a brilliant but uncomplicated solution. I'd imagine synchros get hot quickly and will get worn if you do a lot of downshifting without rev-matching.
__________________
E90 330i Black Sapphire 6MT | 991.1 C4 Platinum Silver 7MT
Appreciate 0
      02-08-2008, 10:43 AM   #127
magillagorilla
Private
3
Rep
50
Posts

Drives: S4
Join Date: Oct 2007
Location: seattle

iTrader: (0)

OT, but why was this thread moved? Bogus decision on the part of the mods. People are not seeing it/responding as a result.
Appreciate 0
      02-08-2008, 10:44 AM   #128
!Xoible
Banned
United_States
823
Rep
46,029
Posts

Drives: ....
Join Date: Nov 2006
Location: .

iTrader: (4)

Garage List
2008 M3  [4.00]
2007 335i  [9.00]
2008 528i  [8.00]
2006 Infiniti - G35 ...  [8.00]
yes it did move. it used to be in General talk, but now it's in performance/tracking, etc
Appreciate 0
      02-08-2008, 10:45 AM   #129
!Xoible
Banned
United_States
823
Rep
46,029
Posts

Drives: ....
Join Date: Nov 2006
Location: .

iTrader: (4)

Garage List
2008 M3  [4.00]
2007 335i  [9.00]
2008 528i  [8.00]
2006 Infiniti - G35 ...  [8.00]
Quote:
Originally Posted by BK View Post
I haven't looked at the photos linked above, but most synchros I've seen in photos are pretty unsophisticated. They look like brass rings. One side is fixed to the collar and the other is open and grabs the end of the spinning gear to synch up the speed of the collar to the gear, so the teeth of the collar will plug into the gear without grinding. Basically, it is grabbing the gear without teeth to allow it to slip a bit and speed up, before it inserts the teeth into the gear.

Those with more knowledge can correct me if I've described it wrong, but it seems like a brilliant but uncomplicated solution. I'd imagine synchros get hot quickly and will get worn if you do a lot of downshifting without rev-matching.
that's what i thought. if you do not rev-match bliping at neutral you will wear out your synchros quick.
Appreciate 0
      02-08-2008, 10:49 AM   #130
!Xoible
Banned
United_States
823
Rep
46,029
Posts

Drives: ....
Join Date: Nov 2006
Location: .

iTrader: (4)

Garage List
2008 M3  [4.00]
2007 335i  [9.00]
2008 528i  [8.00]
2006 Infiniti - G35 ...  [8.00]
I dont have sound, but i think this guy is discussing the synchro's at some point in his video

http://videos.howstuffworks.com/hows...work-video.htm
Appreciate 0
      02-08-2008, 11:03 AM   #131
BoostedBMW
Moderator
BoostedBMW's Avatar
United_States
132
Rep
6,775
Posts

Drives: TiAg E92 335
Join Date: Oct 2006
Location: Raleigh, NC

iTrader: (14)

Garage List
2003 S2000  [0.00]
Quote:
Originally Posted by captainaudio View Post
It is important to match revs on a downshift. If you do not match revs when you engage the lower gear the car will slow down. This will transfer weight to the front wheels, enlarge the size of the front contact patches and reduce the size of the rear contact patches. If you are at or near the limits of adhesion this can cause Trailing Clutch Oversteer (TCO) which can cause the car to spin out.

To properly execute a downshift while braking:
1. Apply the brakes smoothly with the left side of your right foot..
2. Depress the clutch with your left foot
3. While braking rock your right foot and "blip" the accelerator.
4; Shift into the next lower gear.
6. Release the clutch.

If this is done properly the car will not slow down/

On cars without synchomesh transmissions it is necessary to "Double Clutch"

1, Apply the brakes with the left side of your right foot.
2. Depress the Clutch with your left foot.
3. Shift into neutral
4. Release the Clutch
5.While still braking smoothly rock your right foot and "blip" the accelerator
8, Depress the clucth with your left foot.
9. Shift into the next lower gear.
10. Release the Clutch.

Once you get the hang of it this can be accomplished very quickly and very smoothly.

Many race cars have "Straight Cut" gears and non-synchomesh transmissions.

Most modern MT cars (such as BMWs) have bevel cut gears and sychomesh transmissions. Although "Double Clutching" will work it is not necessary.

I got into the habit of double clutching when I started learnig how to drive race cars. I had 130,000 miles on my Lexus SC300 when I got rid of it and I was still on the original clutch and brakes.


"Coasting" is not a good practice. To keep a car properly balanced you should either be accelerating or braking or applying "maintenance throttle". This is not usually citical whe driving on the road well below the limits of the car but when driving a race car at or close to the limits "coasting" can upset the cars balance. The brakes and accelerator are as much for keeping the car balanced as they are for speeding up and slowing it down.



CA
Very nice explanation. I'm not sure why it was directed at me since I revmatch everyday and heel/toe pretty often despite this gas pedal setup that I hate in this car, but that's a rant for another thread.

Ok, I guess I worded my other post wrong. I have always known why you need to revmatch. All you need to do is drive 100ft and downshift without doing so to realize this. What I don't get is why you need release the clutch when revmatching/downshifting. To me, this seems like a waste of time when you can just keep your foot down on the clutch, which is the same as being in neutral, and blip the throttle right before letting it back out. I just do it in a fluid motion. To have to release the clutch out to blip the throttle and then put it back in, just to release it once again seems like its redundant for no reason. Maybe I just have a different driving style, but when I downshift its smooth and quick so I guess I have to be doing something right. BTW, I'm not talking in theory here about a friend who told me how to drive a MT. I drive one everyday for the past several years so I understand what's going on between the engine and the drivetrain, but I just don't get the practice of actually hitting the clutch twice when you can get the same results in only doing so once. Does this make sense to anyone else?

*edit*... I just re-read your response about synchros versus a dogbox and I now realize what you are trying to say, which is exactly what I was thinking in that its not necessary to doubleclutch a street car. I thought I was going crazy for a minute.
__________________
-Michael.
Berlina Black S2000 CR is now in the garage

l 19" Rial Daytona Race l KW V2 l Eisenhaus Race Exhaust l
Appreciate 0
      02-08-2008, 11:07 AM   #132
!Xoible
Banned
United_States
823
Rep
46,029
Posts

Drives: ....
Join Date: Nov 2006
Location: .

iTrader: (4)

Garage List
2008 M3  [4.00]
2007 335i  [9.00]
2008 528i  [8.00]
2006 Infiniti - G35 ...  [8.00]
Quote:
Originally Posted by BoostedBMW View Post
Very nice explanation. I'm not sure why it was directed at me since I revmatch everyday and heel/toe pretty often despite this gas pedal setup that I hate in this car, but that's a rant for another thread.

... but I just don't get the practice of actually hitting the clutch twice when you can get the same results in only doing so once. Does this make sense to anyone else?
no one is doubting your driving skills in particular. his comment was general for all of us.

I think you double-clutch to do what synchros are supposed to do, i.e. to save them since they wear out quick
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:42 PM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST