|
|
|
|
PLEASE HELP SUPPORT E90POST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
E92 coupe Offset information - Everyone with aftermarket rims plz chime in !!!!!!!!!!
|
|
Wheels and Tires forum Sponsored by The Tire Rack
Please help to directly support e90post by doing your tirerack shopping from the above link. For every sale made through the link, e90post gets sponsor support to keep the site alive. Disclaimer |
|
Thread Tools | Search this Thread |
12-12-2012, 09:39 AM | #508 |
Private
0
Rep 81
Posts |
Ok, since no one has given me any input, I decided on Matte Black Forgestar CF5 deep concave wheel (super light at 22lbs) with the following specs front 8.5x20 et33 235/30/20 rear 9.5x20 et35 275/25/20. that puts the fronts +1mm inside +10mm outside and rears +2mm +10mm. I think the 20's look nicer and with the offset moves the wheels out 10mm front and rear the 30/25 profiles will match stock diameter pretty darn close. Please, if anyone has thoughts on anything different let me know why.
|
Appreciate
0
|
12-12-2012, 09:45 AM | #509 |
Private
0
Rep 81
Posts |
Oh, and the only draw-back is the price, this set-up is going to cost me about $1000 more than 19's because of custom offset and limited tire selection. I'm going with Nitto's.
|
Appreciate
0
|
01-30-2013, 09:01 AM | #510 |
Private First Class
3
Rep 117
Posts |
Hi there, hope someone can shoot some advice here. I'm planning on replacing the Wheel Style 189 on my 2009 E93, thing is, I found an unbeatable deal including tires but the wheels are 19" style 313 for a Z4. I verified the offset numbers on both my current set and the one coming. Here's what I've got using the offset calculator.
FRONT CURRENT STYLE 189 8X18, 225/40/18 OFFSET 34 NEXT STYLE 313 8X19, 225/35/19 OFFSET 29 DIFF 0.453 %. 5mm MORE clearance on the strut side, and the outside edge of the wheel will EXTEND an extra 5mm REAR CURRENT STYLE 189 8.5X18, 255/35/18 OFFSET 37 NEXT STYLE 313 9X19, 255/30/19 OFFSET 40 DIFF -0.016 % 9mm LESS clearance on the strut side, and the outside edge of the wheel will EXTEND an extra 3mm Do you think these numbers are ok, will not make the car look weird or affect the handling ?. I'll post pics and feedback once they are installed, can't wait !!! Thank you all for any help you can provide. Good Luck Jeff |
Appreciate
0
|
01-30-2013, 10:07 AM | #511 | |
General
1568
Rep 29,202
Posts |
Quote:
__________________
F10 520d M-Sport Alpine White | HRE P43SC 20x9+20x11 | Michelin PSS 255/35+295/30 | KW V3 Coilover | M5 Front Sway Bar + M550d Rear Sway Bar | 3DDesign Front Lip | BMW M Performance CF Spoiler | BMW M Performance Diffuser | BMW M Performance Black Grills | BMW M Performance Pedals | |
|
Appreciate
0
|
01-30-2013, 10:40 AM | #512 |
Private First Class
3
Rep 117
Posts |
Thanks Remmib, yes I figured the front will extend a bit more I guess no issues with the fender, but in regards of handling ?. thanks
__________________
335I, ZSP, Monaco\Saddle paddles,CA,PRS
ED Drop Off, Zurich, Oct 30, REDELIVERED DEC 29 '06 |
Appreciate
0
|
03-17-2013, 05:17 PM | #514 |
Major
80
Rep 1,245
Posts |
Hey guys, I have a e92 335 guy who wants to buy my wheels, but I am leaning toward them being too aggressive to work. They are 20x8.5" +16 and 20x10" +25. I figure the rear wheels will work with a stretched tire, but I am worried about the fronts. What are your thoughts?
__________________
2011 AW/FR Extended E92 M3... fully loaded
|
Appreciate
0
|
03-28-2013, 01:11 PM | #515 |
Private
8
Rep 75
Posts |
Widest tires possible on a e93 a 18x8.5 +32 and 18x10 + 38??
Lowered on springs. Any advise would help.
__________________
2008 335i E93, JB4 G5IS0| BMS Catless DP| BMS DCI|BMS Oil Catch Can| BMS Short Throw Clutch Stop, BMS Angel Eyes| FULL ACS Authentic Kit|ACS Springs| FULL ZiZA LED INTERIOR. |
Appreciate
0
|
03-28-2013, 01:59 PM | #516 |
BimmerPost Supporting Vendor
2038
Rep 25,989
Posts |
For those sizes we recommend 235/40/18 and 265/35/18. Shouldn't have any issues running specs like that.
__________________
VMR|Wheels | 714.442.7916 |
sales@velocitymotoring.com | www.velocitymotoring.com | facebook | flickr | Instagram |
Appreciate
0
|
04-06-2013, 01:27 PM | #517 |
Private
8
Rep 72
Posts |
I'm still debating if I should install my KW V1 first and let them settle down and install my rims/tires or just do everything at the same time. What do you guys thinks? Also, would this rim/tire set-up work with modification on the fenders?
Varrstoen LM reps 19x9.5 ET20 & 19x11 ET25 Hankook Ventus V12 EVO 225/35 & 275/30 |
Appreciate
0
|
04-09-2013, 04:23 AM | #518 |
3r1k
30
Rep 360
Posts |
Stock Msport Suspension 19x8.5 +35 225/35/19 with 10mm spacer. Will I rub? (about 2-3 fingers gap from fender to tyres)
__________________
12.836 @ 109.75mph (Cobb - Accessport & VRSF DP)
|
Appreciate
0
|
04-09-2013, 06:43 AM | #520 |
3r1k
30
Rep 360
Posts |
Apologise for the lack of detail.
Yes just the front. I'm on 19x9.5 +33 255/30/19 with 12mm spacer (Rear) and I actually rub if anyone is interested. I had to grind some metal parts to make it not rub so it's not the actual fender that rubs. Thanks for the helping @~XxTeexX~. Will I rub if I switch spacer? 12mm in front instead of 10mm?
__________________
12.836 @ 109.75mph (Cobb - Accessport & VRSF DP)
|
Appreciate
0
|
04-09-2013, 07:34 AM | #521 |
Major General
557
Rep 5,367
Posts |
if your final specs are with spacers is 9.5 +21, your cheapest solution will be to roll/hammer the rear panels and add -.5 of camber. 255.30 on 9.5 is not enough stretch to clear anything esp during compression. A 10mm wont matter at this point either, you will need to shave off some material near where the panel meets the rear bumper. Youre basically pushing the boundary of being flush without stretch trade off is your rubbing.
__________________
You can follow my builds on IG: Tee212 |
Appreciate
0
|
04-09-2013, 11:00 AM | #522 | |
3r1k
30
Rep 360
Posts |
Quote:
Thanks! That's what I reckon as well, I have shaved a bit but it is not enough unfortunately, I'll probably try to shave more since you said switching from 12mm to 10mm won't make much different in this case.
__________________
12.836 @ 109.75mph (Cobb - Accessport & VRSF DP)
|
|
Appreciate
0
|
04-09-2013, 12:35 PM | #523 |
Lieutenant
12
Rep 412
Posts |
275/35/18 (9.5 ET38) & 245/40/18 (8.5 ET35) on stock e92 335 sport suspension?
Car: 2008 e92 335 with stock sport suspension
Tires: Michelin Pilot Super Sports Front: 245/40/18 on 18x8.5 ET35 rims Rear: 275/35/18 on 18x9.5 ET38 rims Question: Will these fit my car without rubbing or should I go with the 265/235 combo instead? Thanks in advance! |
Appreciate
0
|
04-10-2013, 03:41 AM | #524 | |
Major General
557
Rep 5,367
Posts |
Quote:
__________________
You can follow my builds on IG: Tee212 |
|
Appreciate
0
|
04-10-2013, 12:10 PM | #525 |
New Member
2
Rep 21
Posts |
Car is a 2009 e92 328xi
Currently just have the stock 17's on there. Want to put 18's on, does anyone have a recommendation on getting the tires close to flush with the fender, what width i would be looking for? Thanks! |
Appreciate
0
|
04-10-2013, 12:19 PM | #526 |
Enlisted Member
0
Rep 40
Posts |
Hey guys, I was wondering if these will rub, I have an e92 not lowered and without rolled fenders. I want to run 19x9 ET35 and 19x10 ET38 with 245/35/19 and 275/30/19. Will this work? Thanks in advance for your help!
|
Appreciate
0
|
04-10-2013, 12:22 PM | #527 |
Lieutenant
12
Rep 412
Posts |
|
Appreciate
0
|
04-10-2013, 07:37 PM | #528 |
Bavarian Love
24
Rep 263
Posts |
Car : 2009 E92 335XI on stock XI suspension. No plan to drop the car at all in the future.
Tire : Bridgestone Potenza RE050A RFT Looking to change my 189 wheels to VMR VB3. Already figured out the rear (18x9.5, ET33 on 255/35/18) but for the front i'm trying to figure out wich offset to go with. I already know I will go with 18x8.5 on 225/40/18 but not sure wich offset to go with between ET35 or ET40. My reseller suggest that I go with ET40 and nothing else but when I look on the calculator I see : ET35 : 7mm LESS clearance on the strut side, and the outside edge of the wheel will EXTEND an extra 5mm ET40 : 12mm LESS clearance on the strut side, and the outside edge of the wheel will extend to THE SAME point as the stock wheel I assume they suggest to go with 40 because the wheel stay the same on the outside. Any help appreciated ! Offset is one of the thing I always have hard time to figure out. Should I follow my dealer suggestion ET40 or should I go with ET35.
__________________
08 FG2 Civic SI FBO - SOLD
09 E92 335i Xdrive FBO - SOLD 17 F22 230i Xdrive | Alpine White | Coral Red | M-Sport | BMS Intake | JB4 | 666M Rep | M Carbon Mirrors | Roof Rack | Daily Driven Last edited by max_k20; 04-10-2013 at 09:06 PM.. |
Appreciate
0
|
Bookmarks |
Tags |
v715, vmr |
|
|