[WRichieX]

Hey guys, I've searched and the window reset procedure does nothing. I have an e93 so i can't even open my top without lowering the front windows first. I got a new ecu put in a while back and it started happening then. One touch down works but up does not. Anyone come across this issue? Could it be a coding issue? I did have an indy shop try to see if it's coding, but they couldn't figure it out.

[WRichieX]

Bump. Any input would be appreciated!

[ctuna]

There is and initialization procedure somewhere if that doesn't work
you may need the FRM module or CAS reprogrammed.
Was that the module that was replaced?
My guess is the e93 will require special programming you might try the coding sub forum

http://www.e90post.com/forums/forumdisplay.php?f=368

Talk to Bimmergeeks about a remote coding session.

https://www.google.com/url?sa=t&rct=...GygM2UEaf_Vpuw

http://www.bimmerfest.com/forums/sho...d.php?t=650490

There is some debate on what works in the last thread so read all the entrys.

[WRichieX]

Originally Posted by ctuna

There is and initialization procedure somewhere if that doesn't work
you may need the FRM module or CAS reprogrammed.
Was that the module that was replaced?
My guess is the e93 will require special programming you might try the coding sub forum

http://www.e90post.com/forums/forumdisplay.php?f=368

Talk to Bimmergeeks about a remote coding session.

https://www.google.com/url?sa=t&rct=...GygM2UEaf_Vpuw

http://www.bimmerfest.com/forums/sho...d.php?t=650490

There is some debate on what works in the last thread so read all the entrys.

Great! Thanks, I'll read up on this tonight and see if there is a solution. And yes the frm module was replaced. I did it at an indy shop that supposed to be BMW focused but they just didn't know what they were doing.

[ctuna]

Most likely programming is your problem.