Is it possible to code..

Turxor · 02-22-2016, 03:00 PM

Hi!

Is it possible to code so the mirrors fold when i lock the car?
Is it possible to code so the navi shuts of when i push the stop button to turn off the engine?

If yes, what codes do I need to change? Is there any DIY turorial for beginners for these?

Thanks!

N54Society · 02-22-2016, 08:42 PM

Quote:

Originally Posted by Turxor

Hi!

Is it possible to code so the mirrors fold when i lock the car?
Is it possible to code so the navi shuts of when i push the stop button to turn off the engine?

If yes, what codes do I need to change? Is there any DIY turorial for beginners for these?

Thanks!

Yes it's possible to code mirrors on lock. You would need to install NCSExpert and BMW Coding Tool or alternatively install the image provided here:
http://www.e90post.com/forums/showthread.php?t=1220039

This is the procedure for holding down lock for 1.5 seconds but you can change it to 0s as well:

Folding mirrors after 1.5 sec:
It will be in 2 modules CAS and FRM.
Changes you need to make in CAS:

You will need to change following options:
Comfort folding/unfolding for sideview mirrors
• active <-- This one
• not active
When holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. To activate this function please activate ‘Comfort folding/unfolding for sideview mirrors’ in the ‘FRM’ module. Also activate ‘Comfort open using remote’ and ‘Comfort close using remote’ in this module. (CAS)

Comfort closing delay (mirrors)
• 0.0s
• 0.5s
• 1.5s <-- I selected this one
General delay for comfort closing. If ‘0.0s’ is set, mirrors fold immediately when car is locked. (CAS)

and
Do following changes in FRM:

Comfort folding/unfolding for sideview mirrors
• active <-- This one
• not active
This function requires an installed LIN-Bus (usually installed with mirror heating)nWhen holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. May need additional coding of the ‘CAS’ module. (FRM)

Not sure about Navi.

fatjoez · 02-23-2016, 03:13 AM

If you are interested in changing your window/mirror/sunroof comfort open or close delay see below:

Nevermind:
http://www.e90post.com/forums/showth...t=mirror+delay
http://www.bimmerfest.com/forums/arc.../t-708756.html
http://www.bimmerfest.com/forums/arc.../t-686616.html

If anybody wants it, here is my NETTODATA.MAN file for CAS module

Code:

Line #8
OLD IGNORE.
B 00300200,0010,2C,00,10,7F,00,00,00,00,05,00,33,05,05,05,1E,14

NEW TESTED. FIXED ISSUE WITH OPEN/CLOSE DELAY. CHANGED 05 to 0A.
B 00300200,0010,2C,00,10,7F,00,00,00,00,00,00,33,0A,0A,05,1E,14

Mirrors, Windows Front+Rear, Sunroof start open/close within 0.5seconds of holding lock/unlock button

Much nicer

Turxor · 02-23-2016, 03:41 PM

Wow, thanks for fast and detailed answers! I will try this and get back to you guys if I have any questions! Thanks alot!

andas · 03-02-2016, 01:42 PM

Quote:

Originally Posted by vbp6us

Yes it's possible to code mirrors on lock. You would need to install NCSExpert and BMW Coding Tool or alternatively install the image provided here:
http://www.e90post.com/forums/showthread.php?t=1220039

This is the procedure for holding down lock for 1.5 seconds but you can change it to 0s as well:

Folding mirrors after 1.5 sec:
It will be in 2 modules CAS and FRM.
Changes you need to make in CAS:

You will need to change following options:
Comfort folding/unfolding for sideview mirrors
• active <-- This one
• not active
When holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. To activate this function please activate ‘Comfort folding/unfolding for sideview mirrors’ in the ‘FRM’ module. Also activate ‘Comfort open using remote’ and ‘Comfort close using remote’ in this module. (CAS)

Comfort closing delay (mirrors)
• 0.0s
• 0.5s
• 1.5s <-- I selected this one
General delay for comfort closing. If ‘0.0s’ is set, mirrors fold immediately when car is locked. (CAS)

and
Do following changes in FRM:

Comfort folding/unfolding for sideview mirrors
• active <-- This one
• not active
This function requires an installed LIN-Bus (usually installed with mirror heating)nWhen holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. May need additional coding of the ‘CAS’ module. (FRM)

Not sure about Navi.

But this won't work with standard mirrors right? Is it possible to retrofit folding mirrors from other car? I read you need power seats for it to work?

N54Society · 03-02-2016, 11:33 PM

Quote:

Originally Posted by andas

But this won't work with standard mirrors right? Is it possible to retrofit folding mirrors from other car? I read you need power seats for it to work?

I think you can retrofit them but I'm not sure about them responding to coding. Sorry.

fatjoez · 03-07-2016, 02:33 AM

Updated my post above with a bug fix.

Now windows/mirrors open/close with 0.5second delay.

For 0 second delay (instant) as original poster asked.
Copy my line & change 0A,0A to 00,00.

But I don't recommend it. It's annoying. Try for yourself and see.

N54Twin · 03-07-2016, 05:56 AM

Quote:

Originally Posted by fatjoez

If you are interested in changing your window/mirror/sunroof comfort open or close delay see below:

Nevermind:
http://www.e90post.com/forums/showth...t=mirror+delay
http://www.bimmerfest.com/forums/arc.../t-708756.html
http://www.bimmerfest.com/forums/arc.../t-686616.html

If anybody wants it, here is my NETTODATA.MAN file for CAS module

Code:

Line #8
OLD IGNORE.
B 00300200,0010,2C,00,10,7F,00,00,00,00,05,00,33,05,05,05,1E,14

NEW TESTED. FIXED ISSUE WITH OPEN/CLOSE DELAY. CHANGED 05 to 0A.
B 00300200,0010,2C,00,10,7F,00,00,00,00,00,00,33,0A,0A,05,1E,14

Mirrors, Windows Front+Rear, Sunroof start open/close within 0.5seconds of holding lock/unlock button

Much nicer

Will this work on E60?

Why they made it so complicated on 5series....

fatjoez · 03-08-2016, 01:59 AM

Not sure but I think it probably will.

All you have to do is use NCS Dummy to view your TRC file.

Then you can see what the settings are and what data position they are located at.

If they are different to the e90 which they may be,
you need to read the data position that NCS Dummy tells you the setting is located on.

Then you go to notepad and find that line the NETTODAT file and edit the number value.

If you don't know how to do the above that I've explained you probably need to read up on NCSdummy and try it out a little.

02-22-2016, 03:00 PM	#1
Turxor New Member 1 Rep 7 Posts Drives: BMW 335ci Join Date: Jun 2015 Location: Sweden iTrader: (0)	Is it possible to code.. Hi! Is it possible to code so the mirrors fold when i lock the car? Is it possible to code so the navi shuts of when i push the stop button to turn off the engine? If yes, what codes do I need to change? Is there any DIY turorial for beginners for these? Thanks!
	Appreciate 0 Tweet Quote

02-23-2016, 03:13 AM	#3
fatjoez student 226 Rep 911 Posts Drives: e90 Join Date: Sep 2009 Location: Bermuda Triangle iTrader: (0)	If you are interested in changing your window/mirror/sunroof comfort open or close delay see below: Nevermind: http://www.e90post.com/forums/showth...t=mirror+delay http://www.bimmerfest.com/forums/arc.../t-708756.html http://www.bimmerfest.com/forums/arc.../t-686616.html If anybody wants it, here is my NETTODATA.MAN file for CAS module Code: Line #8 OLD IGNORE. B 00300200,0010,2C,00,10,7F,00,00,00,00,05,00,33,05,05,05,1E,14 NEW TESTED. FIXED ISSUE WITH OPEN/CLOSE DELAY. CHANGED 05 to 0A. B 00300200,0010,2C,00,10,7F,00,00,00,00,00,00,33,0A,0A,05,1E,14 Mirrors, Windows Front+Rear, Sunroof start open/close within 0.5seconds of holding lock/unlock button Much nicer Last edited by fatjoez; 03-07-2016 at 02:30 AM..
	Appreciate 0 Quote

02-23-2016, 03:41 PM	#4
Turxor New Member 1 Rep 7 Posts Drives: BMW 335ci Join Date: Jun 2015 Location: Sweden iTrader: (0)	Wow, thanks for fast and detailed answers! I will try this and get back to you guys if I have any questions! Thanks alot!
	Appreciate 0 Quote

03-07-2016, 02:33 AM	#7
fatjoez student 226 Rep 911 Posts Drives: e90 Join Date: Sep 2009 Location: Bermuda Triangle iTrader: (0)	Updated my post above with a bug fix. Now windows/mirrors open/close with 0.5second delay. For 0 second delay (instant) as original poster asked. Copy my line & change 0A,0A to 00,00. But I don't recommend it. It's annoying. Try for yourself and see.
	Appreciate 0 Quote

03-08-2016, 01:59 AM	#9
fatjoez student 226 Rep 911 Posts Drives: e90 Join Date: Sep 2009 Location: Bermuda Triangle iTrader: (0)	Not sure but I think it probably will. All you have to do is use NCS Dummy to view your TRC file. Then you can see what the settings are and what data position they are located at. If they are different to the e90 which they may be, you need to read the data position that NCS Dummy tells you the setting is located on. Then you go to notepad and find that line the NETTODAT file and edit the number value. If you don't know how to do the above that I've explained you probably need to read up on NCSdummy and try it out a little.
	Appreciate 0 Quote