[yakev724]

I consider myself proficient at realoem but can't find this part no.

I need the oil cooler cover (for the inside of the wheel liner) as pictured below:
If anyone can look up the part no. or check theirs, I'd appreciate it. Thanks!

[NiVeDh]

Check this post out: http://www.e90post.com/forums/showpo...51&postcount=2

It has to be one of those.

[txusa03]

noticed u drive a 330i which does not have oil cooler. On a 330i, that cover is #9

http://www.realoem.com/bmw/showparts...62&hg=51&fg=75

[yakev724]

Originally Posted by txusa03

noticed u drive a 330i which does not have oil cooler. On a 330i, that cover is #9

http://www.realoem.com/bmw/showparts...62&hg=51&fg=75

I just replaced my wheel liner with one from a 335 WITH the oil cooler, hence me asking the question explicitly in the 1st post.

Thanks for the lookup

[yakev724]

Originally Posted by NiVeDh

Check this post out: http://www.e90post.com/forums/showpo...51&postcount=2

It has to be one of those.

Seems like I found it. Went through plugging that list into realoem, thanks

(6) 51717161436 - $41.95

[RyanGWPG]

I know this is a mega old topic but I was hoping someone could tell me what clips and/or screws I need for this cover.
Mine is completely gone and I don't see any clips (or screws) in the fender liner. I have the part for a cover in my cart at FCPEuro but I'd like to order the clips/screws at the same time.
I've checked out exploded diagrams where I can find them but there's nothing really clear.