Trouble coding LCI halogen to Pre LCI xenon

its_dewayne · 01-08-2018, 11:36 AM

My car is an 09 E90 with halogen headlights and Im trying to get it set up to install some pre lci oem xenons. With the xenons hooked up, the xenons fire up, but cut off eventually, and the halos and high beams dont even come on.

I have coded/wrote $522 to both cas and nfrm, but Im not sure what to do next.

The previous owner of the headlights has already modified the wiring inside the housing (splicing the ballast ground wire to one of the high beam ground wires).

***Are you suppose to clear out the .trc and .man files after every use?

its_dewayne · 01-08-2018, 03:24 PM

Been messing around all day and still no luck. The only thing Ive successfully done was coded out the corner lights.

its_dewayne · 01-09-2018, 08:54 AM

Anyone willing to help out? Would like to get these installed soon. It seems as some of the parameters that a lot of the DIY on here show, are not listed in my trc/man files.

its_dewayne · 01-09-2018, 04:45 PM

Messed around with the car just a bit ago and still no changes. Im missing the following parameters when I search for them to edit.

KALTUEBERWACHUNG_FL to nicht_aktiv (high beam cold)
WARMUEBERWACHUNG_FL to nicht_aktiv (high beam warm)
KALTUEBERWACHUNG_BLK_VO to nicht_aktiv (turn signal cold)
WARMUEBERWACHUNG_BLK_VO to nicht_aktiv (turn signal warm)
KALTUEBERWACHUNG_SL_V_L to nicht_aktiv (parking lamp left cold)
WARMUEBERWACHUNG_SL_V_L to nicht_aktiv (parking lamp left warm)
KALTUEBERWACHUNG_SL_V_R to nicht_aktiv (parking lamp right cold)
WARMUEBERWACHUNG_SL_V_R to nicht_aktiv (parking lamp right warm)
FEHLERMELDUNG_CC_SL_V_L to nicht_aktiv (parking lamp left error code)
FEHLERMELDUNG_CC_SL_V_R to nicht_aktiv (parking lamp right error code)

PWM_ANST_FL_BIXENON

01-08-2018, 11:36 AM	#1
its_dewayne Private 29 Rep 64 Posts Drives: 2009 328xi Join Date: Feb 2017 Location: Danville, Ky iTrader: (0)	Trouble coding LCI halogen to Pre LCI xenon My car is an 09 E90 with halogen headlights and Im trying to get it set up to install some pre lci oem xenons. With the xenons hooked up, the xenons fire up, but cut off eventually, and the halos and high beams dont even come on. I have coded/wrote $522 to both cas and nfrm, but Im not sure what to do next. The previous owner of the headlights has already modified the wiring inside the housing (splicing the ballast ground wire to one of the high beam ground wires). **Are you suppose to clear out the .trc and .man files after every use? Last edited by its_dewayne; 01-09-2018 at 09:21 AM..*
	Appreciate 0 Tweet Quote

01-08-2018, 03:24 PM	#2
its_dewayne Private 29 Rep 64 Posts Drives: 2009 328xi Join Date: Feb 2017 Location: Danville, Ky iTrader: (0)	Been messing around all day and still no luck. The only thing Ive successfully done was coded out the corner lights.
	Appreciate 0 Quote

01-09-2018, 08:54 AM	#3
its_dewayne Private 29 Rep 64 Posts Drives: 2009 328xi Join Date: Feb 2017 Location: Danville, Ky iTrader: (0)	Anyone willing to help out? Would like to get these installed soon. It seems as some of the parameters that a lot of the DIY on here show, are not listed in my trc/man files.
	Appreciate 0 Quote

01-09-2018, 04:45 PM	#4
its_dewayne Private 29 Rep 64 Posts Drives: 2009 328xi Join Date: Feb 2017 Location: Danville, Ky iTrader: (0)	Messed around with the car just a bit ago and still no changes. Im missing the following parameters when I search for them to edit. KALTUEBERWACHUNG_FL to nicht_aktiv (high beam cold) WARMUEBERWACHUNG_FL to nicht_aktiv (high beam warm) KALTUEBERWACHUNG_BLK_VO to nicht_aktiv (turn signal cold) WARMUEBERWACHUNG_BLK_VO to nicht_aktiv (turn signal warm) KALTUEBERWACHUNG_SL_V_L to nicht_aktiv (parking lamp left cold) WARMUEBERWACHUNG_SL_V_L to nicht_aktiv (parking lamp left warm) KALTUEBERWACHUNG_SL_V_R to nicht_aktiv (parking lamp right cold) WARMUEBERWACHUNG_SL_V_R to nicht_aktiv (parking lamp right warm) FEHLERMELDUNG_CC_SL_V_L to nicht_aktiv (parking lamp left error code) FEHLERMELDUNG_CC_SL_V_R to nicht_aktiv (parking lamp right error code) PWM_ANST_FL_BIXENON
	Appreciate 0 Quote