Sponsored by The Tire Rack

[bk20627]

hello everyone~!

i have bilstein pss9 with vmr vb3 19*8.5 et 40 front (add 15mm spacer)
rear have 19*10 et 25 with 5mm spacer.

for the front wheel set up; is it too aggressive for 15mm spacer?
i don't have any problem but when i reverse with full turn on wheel, i can hear some sounds. tires are touching fender liner (inside)

tires are nexen 3000 235/35/19 for front

need help ~!

thank you

[edirtaynine]

if thats the only time it rubs in the front, i'd say u can just leave it alone. if it bothers u, maybe a 225 in the front will help.

[Hey Ant]

fronts are not aggressive at all, you're likely to be rubbing from the rear more than anything.

[MRRwheels]

well your ideal et should be 19x8.5 35et fronts so if you need a 100% no rub with that tire you need to remove those front spacers and just do a 5mm. but if it only rubs going in reverse as you turn then i would leave them alone. unless it douse bother you.

[bk20627]

Originally Posted by edirtaynine

if thats the only time it rubs in the front, i'd say u can just leave it alone. if it bothers u, maybe a 225 in the front will help.

yea so far...its only rubs when i fully turn on wheel...normal driving can't hear any sounds...
thank you

maybe go for lower spacer or? without spacer???

but you mean maybe i can just change tire to 225 right?

[bk20627]

Originally Posted by Hey Ant

fronts are not aggressive at all, you're likely to be rubbing from the rear more than anything.

well rears are we fender roll fully so, theres no problem with rear
but only fronts are .....

but like i sai can't hear any rub sound when i driving normal but when i pull my car in garage..i have to fully turn on wheel...but i can hear that tires are toucing fender inside plastic pannel....

[bk20627]

Originally Posted by MRRwheels

well your ideal et should be 19x8.5 35et fronts so if you need a 100% no rub with that tire you need to remove those front spacers and just do a 5mm. but if it only rubs going in reverse as you turn then i would leave them alone. unless it douse bother you.

yeah it's only happen in reverse ..oh when i make a u-turn, i can hear it too btw.

[NiVeDh]

Your rears are really aggressive.

[bk20627]

Originally Posted by NiVeDh

Your rears are really aggressive.

i put 5 mm spacer on back....and they did fender roll (full)
should i take off the spacer on back too?

hm....i have no idea.....

[Pcemkr]

This is not aggressive. My front 9.5" et19 sits 19mm further out than yours and does not rub.

[bk20627]

Originally Posted by Pcemkr

This is not aggressive. My front 9.5" et19 sits 19mm further out that yours and do not rub.

how???
when you fully turn on your wheel, won't touch fender liner pannel??

[Pcemkr]

Magic.

[bk20627]

Originally Posted by Pcemkr

Magic.

lolz haha...i need help

[Pcemkr]

Take the wheel off and look for signs of rubbing.

[bk20627]

these area touching.....

[Pcemkr]

Not really sure why you're rubbing there.
Are PSS9s dampening adjustable? Stiffen them up.

[bk20627]

Originally Posted by Pcemkr

Not really sure why you're rubbing there.
Are PSS9s dampening adjustable? Stiffen them up.

yes it's adjustable.

if i turn my wheel fully left or right there's no gap between that area.

tires are touching that pannel.

but on nomal (straight) driving...never happen....it always when i turn my wheel full lock and reverse.....