|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Helix DSP and HiFi HU
|
|
03-13-2013, 06:15 PM | #1 |
New Member
3
Rep 28
Posts |
Helix DSP and HiFi HU
I have a BMW E91 2006 with HiFi option. I am looking for a DSP and checked out the P-DSP from Helix. I like the user interface but the problem is that P-DSP doesn’t support differential balanced inputs (only high level inputs with fixed 10v sensitivity).
Now Helix has released the next model which has differential high and low level inputs. The input sensitivity could be changed on the high level input. The input sensitivity for the low level input is 4V and the impedance is 5kOhm. 4V is a little bit too low for the HiFi HU which outputs 5V. The high level input impedance is only 30Ohm which would require the HU to deliver 170mA/channel. Would my HU manage to deliver this? Any help is very appreciated. |
03-14-2013, 11:39 AM | #2 |
Brigadier General
300
Rep 3,969
Posts |
That should not be a problem. As with any source unit, you have to find the point where distortion is produced. The distortion can be from the HU itself, or from the inputs of the processor, it doesn't really matter. Then make sure you never exceed that particular volume level.
__________________
Mobridge DA2 > JBL MS-8 > ARC XDi 600/4 > JBL Gti 408 Mids & Vifa OT19 Tweeters; PG Ti2 1600.5 > Morel HCW-10 & IDMax 15
|
Appreciate
0
|
03-14-2013, 03:51 PM | #3 | |
New Member
3
Rep 28
Posts |
Quote:
I could try to use the high level input but I am a little bit afraid the HU could be damaged (to high current). |
|
Appreciate
0
|
Bookmarks |
|
|